X48 Rampage Formula Preview.

[Mikefra2008]

450fsb The memories do not leave me to lower them of 1200mhz, The lcd poster stays in dram ?¿?

[Alien Grey]

This is a copy of a post from the ASUS Rampage Formula forum.

Nobody seems to be running stable on his board with memory speeds at +1200MHz.

I already contacted the ASUS Global Tech Support for that problem but I never got an answer back. It's easier to deny the problem than to fix it.

This board is powered with a X48 Chipset that is made for +1600MHz memory speeds and shouldn't have problems with +1200MHz.

When you've got memory that should be running at 1200MHz or more and you can't seem to run stable on your board with that memory speed, contact the ASUS Tech Support with a Technical Inquiry and ask them to fix the problem in a new BIOS release.

[Alien Grey]

450fsb The memories do not leave me to lower them of 1200mhz, The lcd poster stays in dram ?¿?

You've got two problems. You've got to push your memory to run at 1200MHz and the board doesn't seem to handle the higher DDR speeds very well.

There's not much you can do about it besides complaining to ASUS like I did.

Look what the G.SKILL F2-9600CL5D-4GBPI can do on a different board. Here's the link to that post.

Is this board that much better or does it have a decent BIOS that can handle the higher speeds?

My guess is that it has a decent BIOS that can handle with that high DDR speeds.

[Alien Grey]

Ohh... And I forgot to mention that if they can't or won't fix this issue with this board they should remove the 4 X 1 Giga Corsair 1250MHz Memory from the QVL that we don't have to buy Memory that can't run at it's rated speed on this board.