MMM
Results 1 to 11 of 11

Thread: My EVGA X58 SLI Classified arrived [233bclk on my C1 920]

  1. 04-22-2009, 10:10 PM #1
    TinTin
    TinTin is offline
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884

    My EVGA X58 SLI Classified arrived, 5GHz D0 920 in water

    Corsair GT is for photo only...look excellent for color match


    Huge North Bridge Heatsink


    10Phase Digital PWM and 2 EPS 8pin power for CPU


    A new PSU for my Classified which has 2 8pins EPS


    Basic Test
    (1) SPI 32M @ 200X20, 1.247V


    (2) MemtestX8 @ DDR3 2000 CL7-7-7-20 @ 1.6V, 200% passed



    Overclocking
    (1) 215.5X21, DDR3 2155 SPI 32M


    (2) 217.5X20, DDR3 2175 SPI 32M


    (3) 233bclk Screen capture and Validation



    (4) 4745MHz Validation


    My D0 920 is shipping, may arrive in a few days and will continue to bench....
    Last edited by TinTin; 04-25-2009 at 03:41 AM.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW
    Reply With Quote Reply With Quote
  2. 04-22-2009, 10:37 PM #2
    pertonas
    pertonas is offline
    Registered User
    Join Date
    Apr 2008
    Posts
    40
    nice man
    unluckyly I can't get this board in taiwan
    Reply With Quote Reply With Quote
  3. 04-22-2009, 10:44 PM #3
    TinTin
    TinTin is offline
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by pertonas View Post
    nice man
    unluckyly I can't get this board in taiwan
    Hong Kong did not have it too. But my friend in Taiwan helps me to buy this.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW
    Reply With Quote Reply With Quote
  4. 04-22-2009, 10:50 PM #4
    pertonas
    pertonas is offline
    Registered User
    Join Date
    Apr 2008
    Posts
    40
    taiwan ???
    who got this things in taiwan
    Reply With Quote Reply With Quote
  5. 04-25-2009, 03:39 AM #5
    TinTin
    TinTin is offline
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Finally, my D0 arrived today.

    A (238.14X21) 5GHz in water Validation, it is not bad.


    5022MHz Screen shot, CPU-Z Validation corrupted.
    Last edited by TinTin; 04-25-2009 at 03:43 AM.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW
    Reply With Quote Reply With Quote
  6. 04-25-2009, 04:18 AM #6
    Splave
    Splave is offline
    PI in the face
    Join Date
    Nov 2008
    Posts
    3,083
    Send a message via MSN to Splave
    wow got any bios settings for us, nice work
    Quote Originally Posted by L0ud View Post
    So many opinions and so few screenshots
    Reply With Quote Reply With Quote
  7. 04-25-2009, 04:36 AM #7
    jaggerwild
    jaggerwild is offline
    Registered User
    Join Date
    Apr 2008
    Location
    Up State New York
    Posts
    94
    Send a message via Yahoo to jaggerwild
    WOW!
    Very nice OC, keep pushing it That board is made to take a lickin and keep on tickin..........
    RIVE/3930K Water
    16GB Gskill Ripjaw X 2133
    2X Intel CherryVille 520 60GB Raid O
    2X HD 7970 VisionTec
    Corsair AX1200

    Biostar TP45HP, GA-X48-DQ6 , Maximus IV Gene Z
    Reply With Quote Reply With Quote
  8. 04-25-2009, 04:37 AM #8
    carpo93
    carpo93 is offline
    Xtreme Member
    Join Date
    Oct 2008
    Location
    Bologna,Italy
    Posts
    415
    wow awesome board
    sorry for my bad english
    Gigabyte Battlefield Pi 1M #3
    Reply With Quote Reply With Quote
  9. 04-25-2009, 05:00 AM #9
    TinTin
    TinTin is offline
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by Bobbylite View Post
    wow got any bios settings for us, nice work
    Thanks,

    Every i7 is different, so I can't say my BIOS setting is suitable for yours.

    But for D0 and Classified, don't push Vtt too much and alone, some D0s hate high Vtt, I am using 1.55V Vtt which suits much my D0. Any higher Vtt will cause dropping off of bclk and instability.

    But should play against
    IOH/ICH I/O Voltages
    IOH Vcore
    QPI PLL Vcore

    QPI compensation, CPU impendance....

    I just receive my D0 this afternoon, so I am in a very hurry to try the clock....still need tweaking the voltage.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW
    Reply With Quote Reply With Quote
  10. 04-25-2009, 06:00 AM #10
    Justifire
    Justifire is offline
    Xtreme Member
    Join Date
    Nov 2002
    Location
    Netherlands
    Posts
    232
    Quote Originally Posted by TinTin View Post
    Thanks,

    Every i7 is different, so I can't say my BIOS setting is suitable for yours.

    But for D0 and Classified, don't push Vtt too much and alone, some D0s hate high Vtt, I am using 1.55V Vtt which suits much my D0. Any higher Vtt will cause dropping off of bclk and instability.

    But should play against
    IOH/ICH I/O Voltages
    IOH Vcore
    QPI PLL Vcore

    QPI compensation, CPU impendance....

    I just receive my D0 this afternoon, so I am in a very hurry to try the clock....still need tweaking the voltage.
    Nice
    Keep us updated !
    QX9650 @ 4450 mhz
    Asus Striker II Extreme 790i
    4 GB Corsair Dominator 1800 @ 1870 8-8-8-20 1T 1.8v
    3 x Asus GTX280 TRI-SLI 810/1647/1296
    Asus Xonar DX
    Thermaltake Toughpower 1500 W
    Dell 30" 3007WFP
    Logitech G7, G15, G25
    Watercooling Hailea 1500 chiller, EK, Swiftech, D-Tek
    Dual Prometeia site
    Reply With Quote Reply With Quote
  11. 04-25-2009, 07:08 AM #11
    TinTin
    TinTin is offline
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    5022MHz Validation

    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules