Retail E8600 Overclock, Temps, Settings Thread

[OC4/3]

Got an E8600 running for quite some time now, and thought I'd share some results.

I am not unhappy with this chip but it doenst compare to some chips I had in the past, it needs a lot of volts. It's a Q820 with 1.25 VID. System in sig.

Any suggestions for improvement? Would like to hear some.

FSB 440
Multiplier 10
Vcore +375Mv (=1.408v under load)
Vdroop control enabled
PLL volt 1.55v
FSB term 1.15v
NB Volt 1.3v
GTL 0/1 0.61
GTL 1/2 0.61
NB GTL 0.58

DRAM Volt 2.1v
333/1057

Errr.....my E8600 Q820A439 1.25VID take 1.42vcore set,1.37v load or so to do 4.3ghz 64bit os stable
And it won't hit 5ghz

[0Ro!]

hi there
3 days ago i ordered mi E8600 from a local shop for 255Euro and today I tested it very fast in SPI 1M on my crappy WC system ...started slowly on lovered vcore 1,168V 4G - sayed wow, gotcha go higher 1,272V 4,5G- thats the way , the final clock booted from the bios 500x10 w/ 1,448V SPI 1M stable


stable 24/7 settings I post latter

[rastaseb]

hi there
3 days ago i ordered mi E8600 from a local shop for 255Euro and today I tested it very fast in SPI 1M on my crappy WC system ...started slowly on lovered vcore 1,168V 4G - sayed wow, gotcha go higher 1,272V 4,5G- thats the way , the final clock booted from the bios 500x10 w/ 1,448V SPI 1M stable


stable 24/7 settings I post latter

batch of your E8600 ? If i could find the same one !!!!!!

[KURTZ]

batch of your E8600 ? If i could find the same one !!!!!!

check mine first :p

[0Ro!]

batch of your E8600 ? If i could find the same one !!!!!!

batch same as KURTZ, but non same VID...i have a 1,2V VID