first sorry for my bad english
System Specs:
CPU: Core 2 Quad Q6600@3.4GHz@1.264V
Mainboard: ASUS P5Q-E Bios: 1406m
RAM: 2GB OCZ Reaper 1066@1133
GPU: ATI HD3850 512MB
Power Supply: be quiet! Straight Power 550W
OS: Windows XP SP3
Detailed Infos:
http://www.sysprofile.de/id13681
Bios Settings:
Code:
BIOS 1406m - Q6600 mit 3400 Mhz
.:AI Tweaker:.
AI Overclock Tuner [Manual]
CPU Ratio Setting [08]
FSB Frequency [425]
PCI-E Frequency [100]
FSB Strap to North Bridge [Auto]
DRAM Frequency [DDR2 - 1133]
DRAM CLK Skew on Channel A1 [Auto]
DRAM CLK Skew on Channel A2 [Auto]
DRAM CLK Skew on Channel B1 [Auto]
DRAM CLK Skew on Channel B2 [Auto]
DRAM Timing Control [Manual]
1st Information : 5-5-5-15-4-60-6-4
CAS# Latency [5]
DRAM RAS# to CAS# Delay [5]
DRAM RAS# Precharge [5]
DRAM RAS# Activate to Precharge [15]
RAS# to RAS# Delay [4]
Row Refresh Cycle Time [60]
Write Recovery Time [6]
Read to Precharge Time [4]
[...]
DRAM Static Read Control [Disabled]
DRAM Read Training [Disabled]
MEM. OC Charger [Enabled]
AI Clock Twister [Strong] >Moderate *
AI Transaction Booster [Manual]
Common Performance Level [8]
Pull-In of CHA PH1 [DISABLED]
Pull-In of CHA PH2 [DISABLED]
Pull-In of CHA PH3 [DISABLED]
Pull-In of CHA PH4 [DISABLED]
Pull-In of CHB PH1 [DISABLED]
Pull-In of CHB PH2 [DISABLED]
Pull-In of CHB PH3 [DISABLED]
Pull-In of CHB PH4 [DISABLED]
******** Please key in numbers directly! ********
CPU Voltage [1.36250] --> real: 1.264V
CPU GTL Voltage Reference (0/2) [0.645]
CPU GTL Voltage Reference (1/3) [Auto]
CPU PLL Voltage [1.50] >1.54 to 1.56v *
FSB Termination Voltage [1.30]
DRAM Voltage [2.12]
NB Voltage [1.32]
NB GTL Reference [Auto]
SBridge Voltage [1.10] >Auto *
PCIE SATA Voltage [1.50]>Auto *
************************
Load Line Calibration [Disabled]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Performance Mode]
I have a big Problem. I cant get my system stable with manual choosed strap. WTF? But with Auto + Strap 400 Memory divider it is stable but the Memory is too high overclocked, because i have to choose Strap Auto and DDR2 - 1133 (850 would be also possible but it isnt in the list to choose) for stability otherwise prime large error. If I choose Strap 400 + DDR2 - 1133 or 851 = BOOTLOOP ?! WTF ?!
Is that a Bios bug or what? It is so
because 1133 is a Strap 400 divider!
Its also with the original Asus Bios!
For example
Strap 200 - Prime Large Errors (Memtest Error Test 5 after 0.5 min)
Strap 266 - Prime Large Errors (Memtest Error Test 5 after 0.5 min)
Strap 333 - Prime Large Errors (Memtest Error Test 5 after 0.5 min)
Strap 400 - BOOTLOOP Why I can't choos Strap 400 manual ? o0
Strap Auto - !Prime Custom STABLE! but Errors in GoldMemory <-- I cant solve these Problems with Timings or Dram Voltage Any conclusion? Why i have these little Errors? Why i can't get get Strap 333 stable ?!
I also tested all these Settings:
Strap: Auto + DDR2 - 851 --> Memtest Error Test 5 after 0.5 min
Strap: Auto + DDR2 - 1021 --> Memtest Error Test 5 after 0.5 min
Strap: Auto + DDR2 - 1066 --> Memtest Error Test 5 after 0.5 min
Strap: Auto + DDR2 - 1133 --> No Prime Large Error, but 1 GoldMemory Error
Strap: Auto + DDR2 - Auto --> Memtest Error Test 5 after 0.5 min
higher isn't possible
I hope you can help me!
THX
Originally Posted by Ket
Reply With Quote
You may of seen the thread already but in general hardware I made a thread showing people how I got Crapative X-Fi software fully functioning on any Realtek HDA chip, the audio quality difference is staggering! Also, you can use AFUDOS to get out of your situation you were in, but you must DL the version I attached to one of my posts, its the only version that will let you do it 
My system should be alot smoother now that I have the backup chip on the 1406 version. One thing is for sure, my MB has been kicking longer then any one elses I have seen on here posting. 
. I will check out that sound card thing you mentioned.
Bookmarks