It's 0.084GHz benching on X2 7750BE !

[Ivanqu]

84.71mhz
dual core !

wow-----

[[XC] Oj101]

Hahaha let's see Intel beat that

[FlanK3r]

lol ), nice job, 85MHz

[Turrican]

extrme over(under)clocking the other way. very nice

[i found nemo]

those are break neck speeds bro!!! lololol

[vegabass]

Impressive! That shows progress... the screenshot below is a Cyrix M2 PR300 (225MHz) running Pi 1M on Win2K Server - note the slower time despite the much faster clock speed...

[.::NeO::.]

rofl that's the lowest speed i've ever seen in my life dude!

84.7mhz it's just...Xtreme

.::NeO::.

[s0lid]

Haha, That cpu is @ 85.1Mhz faster than my Via C3 933Mhz @ 1014MHz

[Mean Machine]

I suppose the extra wad of cache does its job with the Phenom, it'll kick every old CPU's butt if compared directly. Wasn't expecting it to beat a VIA CPU at 1GHz+ though.

[ZoLKoRn]

Awesome clocks!

I'm impressed by your patience ! 12m of waiting for Pi1M .
BTW you should try Cinebench R10 Single CPU I couldn't wait till the end at 112MHz Phenom II!

Huh... Cinebench R10 Single CPU ! noooooooo

It may seem slow but only about 15-years ago that system would had been killer fast. It would be nice to know how it compared against 100mhz 486

I remember back in the day when i had to use turbo-button to overclock 486 from 40mhz to 66mhz for playing doom. After some time it would crash but i was just too young to know that better heatsink+fan might have done the trick to get it stable

Keep... umm.. pushing it?

15-year ago oh that long time, I think that when 15 years ago i'm do not know anything with computer and overclocking

Temps?? :P

it about 25-30 ํC not below or over that and room temp. about ~ 25 ํC

Does it even get warm? coolerless...

hahahahahhaha

nice one Zolk ,i love the Aquamark score
at that cpu speed you need ages to finish the Aqua03

I wanna see a 32mb SuperPi score

for Aqua3 it used time about 30mins and 2k6 very long time for cpu test

ouch

I hope there wasn't any cooling on that cpu during the tests. It would be useless

I already tried for it too but it can't unless if no any heatsink temps will up to 70 ํC on IHS to fast after load

the pi32m has been started ,just wait ....a month i think

Hahahaha.... i tried too and never saw first started coz can't wait

I notice a slight vcore drop for the last few tests, I really would've thought 0.5v would be more than enough for 24/7 stability at 1GHz

It can't drop Vcore to below 0.8V if need some benching, i already tried at 0.800V it'll can't bench 2k6

It would win thanks to DDR2

Yah DDR2 help to much

Nice way to test!.... definately a bit different. Is the VCore accurate? Sometimes silicon doesnt like having the voltage reduced too much... if PheII scales all the way down, it really opens up some options for picking the thermal dissipation a user wants... with the benfits in cooling and size

Ah yes i see with you too because i can't drop it to much but maybe if i try using watercooling on CPU maybe we'll can drop Vcore to much

How did you get the 0.5x multiplier and what was preventing you from going lower?

used K10 State, you'll can manage cpu multi and cpu vid and for lower bclk or htt i used setfsb and clockgen

Might be board limitations on the HTT? Can only go so low perhaps.

Yes this board it limit at 200MHz HTT for lower but i though not limitation for down htt if have some software support for manage it

How did you manage a 0,5 multiplier?

Awesome scores btw

used K10 State

come on m8 PCI-E @ 8x that will hurt the score

hahaha

Can we get some SP32M runs?





J/K :P

Maybe if i have some free time again i'll doing on it maybe...

fellas, lowest voltage is somewhat 0.75 on cpu's due to the design of an diode, which an transistor has.

They need 0.7 V ~. i can tell for sure, you wont see a cpu with current designs @ lower than 0.6 V ( which is when the diode start conducting.)

so 0.6 is absolute lowest voltage, i ran my PHII 940 @ 0.76 V stable 30 min dual orthos @ 800 mhz
Was damn cold that chip. want an silent HTPC with power, buy an PHII and downclock and give it 0.9 V or something ;D


Anyways, kool session, Now I really want to see an P1 90 mhz compete!

Go go go... try to playing on it because you'll meet some new feeling

84.71mhz
dual core !

wow-----

hehehe... i can beat you speed buddy

Hahaha let's see Intel beat that

Yil, Vivi2, Mean Machine, simoko, Tuvok-LuR-, ThugsRook, FlanK3r, Turrican, i found nemo, .::NeO::.

Thank you to all

[Vapor]

I wonder if a BGA RAMsink could tame that

That's a pretty nifty setup

[.::NeO::.]

thank you ZoLKoRn for sharing this

the more i watch your screens the more i think: WOW that's ing slow!!

i'm really curious to see if i7 CPUs can underclock that well

.::NeO::.

[Benny Lodewijk]

Abang, You are Crazzzzyyyy !!!!!! Thanks for sharing

[i found nemo]

Haha, That cpu is @ 85.1Mhz faster than my Via C3 933Mhz @ 1014MHz

is tha l2 cache level right? holy crap 16 meg

[TheKarmakazi]

this would be a good way to test out if your 1M tweaks are actually making a difference...

[destr0yer]

rofl.

Its needs coolers? A BGA ranskin is suficient!

how much power drain at 85 mhz?

[youngpro]

xtreme patience...

very interesting zolkorn

[fatguy1992]

Dam thats awesome

According to this calculator

http://extreme.outervision.com/psucalculatorlite.jsp

Thats using 2watts of power :o

[tool_462]

Nice

Check the bottom of this page:

http://valid.canardpc.com/records.php

[Harshal]

hehe nice one bro

[Den Leiw]

that's new
good job

[SNiiPE_DoGG]

I think you have a cpu bottleneck....

great work, a fun idea

[Jaco]

wow man , you must be really bored

11m waiting for a spi 1m run

[DrakeZ]

Unlocked multi at its finest!

Is the the Thermalrite NB cooler on a CPU?

[jcool]

Hehehe.. just wait, I got a working P200MMX with board and ram right here. It hasn't been fired up in 5 years or so but it should work. It OCs to 266Mhz! I will try to beat your PI time with it soon