Internal Thermal Control - Disabled
Lim CPUID Max Value - Disabled
Enhanced C1 - Disabled
CPU C State - Disabled
Execute Disable Bit - Disabled
Virtualisation Technology -Disabled
CPU Multiplier - 9.0
Enhanced Speedstep - Disabled
LDT Frequency - 5x

trrd - auto
trc - 22
twr - auto
twtr - auto
tref - auto
trd - autotrfc - 54

CPU Volt - 1.425 for a start
CPU PLL -1.60-1.66-1.68
CPU VTT - 1.30.1.40
Mem V - 2.20
NB V - 1.52
SB V - 1.60
1.2v HT V - 1.40 -1.45
Bridge - auto

DDR cont - Auto
DDR Chan A - ref
DDR Chan B - ref

CPU GTL Ref - +30mV
NB GTL Ref - +30mV
Cpu Level up - auto
Ai Overclock - manual
Loadline Calibration - Enabled
SLI Mem - Disabled
__________________
here's my spec's

Spec's:
Coolermasrer Stacker 830
Tagen 1100watt
Striker II Formula w/Bios 2001
E6850 @3.0Ghz
2GB corsaire value select 800mhz pc2 6400
evga 8800GTS 320mb superclocked
Asetek Liquid CPU Cooling System
Vista ultimate 32 bit


I made it to 3.82Ghz with vcore at 1.43
whenI tried to go to 3.87Ghz/1720mhz fsb
it folded and BSOD so I reset Bios ansd waited till some one who knows more than me could help me [I know basicly nothing] but I learn best by doing
I was a aviation electronics tech in the Navy and Have wired houses for 20+ yr's so I'm not dumb and I know most of the terminalogy I"m just not sure as to what to change to get it to 4.0Ghz STABLE

any help would be great