DFI LANparty DK P45-T2RS/T3RS (Intel P45) - News|Info|Results

[angoholic]

air validation only 665,8MHz today But Bootup 660MHz

[PaVi90]

Hi,
does anyone have tryed a 65nm CPU such as E6600/E6700 on T3RSB PLUS? My E6700 doesn't boot up to 410MHz bus...

[Drix]

air validation only 665,8MHz today But Bootup 660MHz

Nice FSB again !
I think, you've got the memory modules which can do it
May i ask you about your Dram/VTT voltages and GTLs settings ?

This is the max FSB i got on air
http://valid.canardpc.com/show_oc.php?id=511182

[mpc]

@Drix: You need to test a lot of different combinations. Every Board is so different. For me the settings from angoholic won't work out.

I'm at 630Mhz Spi stable right now, waiting on my LN2... Validation was somewhere around 645.

A lot of work, finding out the right settings:

It's worth it!

[PaVi90]

Hi,
I up my previous post and add several details: with the previous memory kit (takems ddr3 2x2gb) my cpu ran at 3,6ghz (400x9) @ 1.43125V BIOS voltage. It was stable, with a memory stick; because of one of this stick was bugged, the company will send another kit, and in the meantime I'm testing a gskill 1600mhz 2GB kit. With this kit at startup BIOS says "oc failed!". Why? Ram are for now underclocked (a few) and the cpu is OCed as it was before with the other memory kit.
Maybe I have to set RAM skew on my T3RSB PLUS?

What do you suggest to do? Thanks a lot in advance!

[knopflerbruce]

Is the T3RSB good for 600MHz FSB++ too? And is the efficiency on the same level as the DDR2 boards?

[Drix]

It makes me wonder too...

@mpc, yes you' re right. I know I have to find my own settings by myself, It depends on a lot of things... And as you probably already know, I've already tried lot of combinations untill now

I noticed that you've got a good precise method, maybe you will contribute to my inspiration, thanks

and sorry for my bad english

[SeLecT]

Little Update with mods etc on page one!

[TheGanG]

Little Update with mods etc on page one!

Do u use that board with CellShocks-1000MHz? I have both CellShocks-1000MHz and Tracers-800MHz but just used Tracers yet...

Thanks...

[SeLecT]

No, i worked with Corsair Dominator PC8500. But i've sold the board a long time ago. Now i use a core i7

[TheGanG]

No, i worked with Corsair Dominator PC8500. But i've sold the board a long time ago. Now i use a core i7

Well i know your "sold" story. Good choice having an i7 system

Crucial Ballistix Tracer PC6400 2*1 GB BL12864AL804.16FD3 (double sided leds)
I use that sticks and haven't seen on your list yet.
E8600 up to 5870 MHz/Q9650 up to 4882 MHz

Anyone use CellShocks 1000 MHz (Black) on DFi DK P45 T2RS Plus?


mpc, ever tried your CellShocks on DFi, bro?

[PaVi90]

Hi all, wich RAM skews do you suggest for a diablo ddr3 2ghz kit? In particular they have micron d2gtr chip...
Other questions: according to you, wich are the best motherboard voltages for B2 65nm cpu?

[PakaPaka]

which bios choose for DFI LP DK P45-T2RS Plus?
which one is the best bios for him?

for overclock&stability

[r0ss0s]

Someone recommend this board for Overclocking and for day-to-day?

[angoholic]

I would use it only for overclocking

My new air validation


KLICK

[nikk]

^^^wicked nice ram too

[nikk]

i played a bit too

boot at 650mhz:

superpi1m


everest


setfsb to 655mhz:

superpi 1m


and a validation at 660mhz http://valid.canardpc.com/show_oc.php?id=516704


apologies if the images are hard to see, didn't expect the resize, i'll upload again if someone wants to

[sabe]

Just to share my results from the Q9550 page...



1.32V NB, 1.25V VTT, 4x2GB Team Xtreem Dark. 100% stable.

[angoholic]

My Everest




€: Nikk you do not neet that high VTT and MCH?? I use 1,45V MCH and 1,28VTT for the validation and for 1M 665MHz

[nikk]

can't do it with much less voltages, but i'll try again, there is always something to mess with in the bios

[angoholic]

i would be glad if i could rise some voltages but this DK does not like that. one or two steps too much and no more going hope you can get higher with less voltages

[Drix]

You rocks guys

With mine, i can't put more than 1.40v to the NB cause it will reboot in loop
I think the chipset is hot, under 55°C when loading @600
Then it's hard to hold on more FSB

Spi32M@575x6

Spi1M@600x6

It doesn't want to run 32M with same setup @600x6.
I will try to relax some timings and data settings...

[nikk]

hope you can get higher with less voltages

thx mate i will try

Drix, get some cold air on that nb

[PaVi90]

No suggestions for me? :/

[Wompa164]

Hi guys,

I'm a little late to the game but I'm getting ready to upgrade my old 975X system to a P45. I'm having a hard time choosing between the T2RS Plus and the Gigabyte UD3P. I've heard so many good things about the UD3P but I hate the color scheme and the board layout. I really like DFI's reputation in the OCing community and I love their board design / layout. If I get my hands on a T2RS Plus with the A3 rev. chipset, which board would you guys recommend for a stable, 24/7 operation with a mild OC (E6600 @ 3.4-3.6GHz on air)? Again I've heard nothing but praise for the UD3 series and it's hard to ignore, but I'm wondering if anyone can give me some good insight into a decision. Does the DFI board use high quality caps/components and give equally good power delivery?

Thanks in advance!