ASUS Striker II Extreme

[Trigger5521]

Try auto on nb gtl, if is unstable, try adding +10 +20 +30, im using +20 for my setup, and dont be afraid to try up to 1.58 nb, just to see if that gets your 8 gigs of ram going. You have to understand, thats alot of ram, very straining on the nb, is going to take some volts to get it stable.

I have tried NB 1.52 all the way to 1.62, OCCT actually fails faster the higher I go, down to failing in 3 seconds now. I don't think super high NB is the answer.

[neo mike]

So your fine with 4 gigs ? it works ok ? but when you go 8 trouble ? i think 1.52 should be ok, did you try nb gtl ?, what about mch ?, you should post a template of your current settings, would be alot easier to try to help. Do u have any MCP Reference voltage ?

[Trigger5521]

So your fine with 4 gigs ? it works ok ? but when you go 8 trouble ? i think 1.52 should be ok, did you try nb gtl ?, what about mch ?, you should post a template of your current settings, would be alot easier to try to help. Do u have any MCP Reference voltage ?

Yeah 4GB ok passes OCCT, same settings with 8GB fails in 5 seconds

Tired NB +40 GTL and +50 NFG

MCP = SB? It's at 1.50

Note Sangrak is running same 8GB RAM kit and CPU his NB is 1.42 SB 1.50 vTT 1.28 and vcore 1.33.

[neo mike]

But same setting not working for you. Im talking about the mcp voltage, 200,201.5 etc, you may need some of that. Dont know what to say, same setup, and it dont work for you, varies between boards i guess. Well if he has it stable, then you can get it stable, always more work with a quad.