nice work giorgio, this comp was alot of fun,
anytime i can win prizes for strapping a tek9 to ram, im in!
nice work giorgio, this comp was alot of fun,
anytime i can win prizes for strapping a tek9 to ram, im in!
Shahryar, you just didnt ... 900?
Sometimes a good slap in the face is all you need
Bios my arss.....
I can fix this problem with a hardware mod....Hipro5
"Overclock till death. Overclocking is life." Hipro5
900MHz dual channel
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94vOriginally Posted by Jowy Atreides
amazing ......DDR2 1800
OMG my coffee came out of my nose when i saw this! OMG... and i mean OMG
I think time closed now for update
congartes DDR2-1800 be brocken, the competition will close after 11hours
its end by USA time, if you not update it , watch your time
Oh sweet, hopefully we'll see one last push
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Oh sweet, hopefully we'll see one last push
“The future belongs to those who believe in the beauty of their dreams.”
ShahrSakhtafzar - Iranian Hardware source
ShahrSakhtafzar OC Team | SSA OC TEAM | First Iranian OC Team
DDR2 PC2-6400 @ 1800 Mhz | 6-10-10-37 = WR
DDR2 PC2-6400 @ 1312 Mhz | 4-4-4-15 On AIR
DDR3 @ 2522 Mhz | 7-9-9-31| 3*2GB | TRIPLE CHANNEL =2nd WR
If your score has been rejected , don't worry about that
the score will be valid if your not using a hack software,
i will check every score, thanks for Franck fixed CPUz validation.
I have been to watch rugby match , ITALY-IRELAND ( 6 nation championship), we loose 38 - 9
So we have still time to update ? still 5 hours ?
Last edited by giorgioprimo; 02-15-2009 at 01:19 PM.
Sorry for my bad english, I'm from italy
Sucks that I have the only UK entry. 2nd highest UD3 vanilla result though-Shpin Juriy is using a -P and i've not checked all the -P and -R submitted results for Vanillas
Last edited by K404; 02-15-2009 at 01:39 PM.
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
finally I'm third of the europe ^^
Crucial rocks
Congratulations for the Winners!
I will see everybody in GOOC If spanish have a qualification...
Last edited by FoX360; 02-15-2009 at 04:06 PM.
its curious that Barani Shahryar and Karimkhani Ali, both from iran and in the same benching team, use identical unusual ram timings and graphics cards on both their runs...
probably just co-incidence though
congratulations Barani on passing the 900mhz barrier
For me the strange part is that they're both relatively unknown, but anyway
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Hey youngpro, after the 890 MHz run, were your sticks beached as?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
dude before i even put the sticks into the ud3 they can hardly boot, because of being trashed on biostar board, now, sometimes they boot, sometimes i had to power on off a dozen times before they start
BEACHED IS
James,dude before i even put the sticks into the ud3 they can hardly boot, because of being trashed on biostar board, now, sometimes they boot, sometimes i had to power on off a dozen times before they start
BEACHED IS
now that the contest is ended, can you share wich bios-setting/voltage you used in your bios, and ( besides the ram) wich kind of cooling did you use to sqeeze that speed ?
Same question for you Shahryar please
Sorry for my bad english, I'm from italy
sure, ill load the board up later and grab you some bios settings,
i just give 2.9v to ram, more than that and i dont see performance improvement... im running ln2 on ram at -140 and nb at -90, with high vmch at 1.85-1.9ish
i see ram performance decrese but ram speed increase by playing with registers is fed14030..
s/so/no special settings in bios, just making things very loose, i find trrd impact ram mhz quite a bit... 7/8 multiplier also seems better for me than 6.. but i cant see any change in key mchbar registers that would indicate it is effecting ram performance,
at the end of the day giorgio i think this competition is a tiny bit of skill and a whole lot of luck
welldone james that is really an amazing score, wickeD!
i'll take some pictures from board and vDIMM mod . special thanks to hazzan for his help .
“The future belongs to those who believe in the beauty of their dreams.”
ShahrSakhtafzar - Iranian Hardware source
ShahrSakhtafzar OC Team | SSA OC TEAM | First Iranian OC Team
DDR2 PC2-6400 @ 1800 Mhz | 6-10-10-37 = WR
DDR2 PC2-6400 @ 1312 Mhz | 4-4-4-15 On AIR
DDR3 @ 2522 Mhz | 7-9-9-31| 3*2GB | TRIPLE CHANNEL =2nd WR
Conggratzzz FTW
... OMG DDR2 1800...
Shahryar
Surprisingly
hicookie
I Shpin Juriy , 14-th position, will there be separately reviewed my results with slats 2 * 2GB, I tried hard
and nitrogen 1608 5-5-5-15 2.6v http://valid.canardpc.com/show_oc.php?id=494227
UD3 and UD3P shown itself equally
Last edited by Highgertz; 02-17-2009 at 11:01 AM.
@Shahryar:
Great Results there. 900Mhz
@Highherzt:Great Results on that 2x2 Kit, too.
How much Voltage did you guys put on the ram while running it with LN2?
Last edited by mpc; 02-17-2009 at 11:03 AM.
Shahryar
Surprisingly
hicookie
I Shpin Juriy , 14-th position, will there be separately reviewed my results with slats 2 * 2GB, I tried hard
and nitrogen 1608 5-5-5-15 2.6v http://valid.canardpc.com/show_oc.php?id=494227
UD3 and UD3P shown itself equally
i love your setting. the pot looks very professional.
Posting Permissions
Reply With Quote
Bookmarks