ok, i was going to max at 2.1v so thats cool, and im going to use Ketz modded bios to reduce over voltage by the motherboard to be sure. then comes the overclocking lol
ok, i was going to max at 2.1v so thats cool, and im going to use Ketz modded bios to reduce over voltage by the motherboard to be sure. then comes the overclocking lol
Lian Li PC 354B - i7 3960X 4.8Ghz 1.39v - Asus Rampage Gen IV - Samsung Green 4x4GB 1866Mhz - Asus 5870 1GB - Corsair TX 650 - Corsair H80i
I've got some 667 budget Hynix running 1016 5 6 5 21 at 2.125 on an AM2 M2N32 SLI board... does that qualify for a cookie... thats 24/7 by the way.Originally Posted by LennyRhys
No offence mate but you can buy ram that has stock speed/timings 800MHz 4-4-4-10. If you get 3-3-3-8 from this at 800MHz or manage to get 5-5-5-15 at over 1100MHz some people may be impressed.
Daily Desktop Custom Built - Modified Data General Server Case
Asus M4A79T Deluxe | 955BE C2 Rev | 4GB OCZ DDR 2000 @ 1600 6 5 6 1T | 4850x2 + 4850 w/MCW60 | CPU on H20 w/ Enzo Sapphire l Custom Built Pump and Res Combo 1/2 Gallon! | 4 Swiftech 320mm Rads with 6 All Aluminum Delta Fans with their own PSU - Finger Loppers - for real!
Literally, CPU&GPUs are almost always at ambient therefore heat ain't limiting sh|t.
Some mobos (like my Abit Pro) won't allow user to set PL
How high will they go at cas5?
Lookie Here:
2x1GB D9 PL5
2x2GB Powerchips PL6
http://valid.canardpc.com/show_oc.php?id=643273
Do you fold?
SuperPi 1M 10.984s @ 4.25GHz
Cool Blue
Gigabyte EP45-UD3P Rev 1.1
E8400 E0 @ 4.1 GHz
Zalmann 9500
2x2GB GSkill 9600 5-5-5-15 1212 MHz 2.1v PL8
9600GSO (I'm a folder, not a gamer)
Corsair VX550 80Plus
WD 500GB SATA3
Antec 900
Very nice mate,Honestly I think you might go for an extra voltage,pull it to 2.25V~ and oc it as far as you can.
2600k@4.8Ghz
Asus P8P67 dlx (1254)
G.skill RipJaws X 4X2GB 1600mhz CL8-8-8-21
HD5450
Samsung HD103UJ X3
Intel X25-M 80GB SSD
Hec Zephyr 650W
Antec P182
just had an hour to play with the G.Skills and got this, i havent tried anything higher than 1000mhz yet, so just timings play.
got them at 1000mhz 5-5-4-13 @ 2V gettint 8200mb read, 7200mb write and 7800mb copy at PL8. at PL7 i get memtest errors.
so cant drop the PL anymore. what else could i try?? lol cant beleive i did quite well with the corsairs before.
Lian Li PC 354B - i7 3960X 4.8Ghz 1.39v - Asus Rampage Gen IV - Samsung Green 4x4GB 1866Mhz - Asus 5870 1GB - Corsair TX 650 - Corsair H80i
I'd try higher volts. Manufacturers sell lots of sticks with stock volts at 2.2. If you have a fan, stick it around there, memory diesn't dissipate much wattage, so cooling it down is easy.
e8600: 6261 mhz (LN2)
e8500: 5830 mhz (dice)
It's really unfeasible, unpractical, and for all intensive purposes... SHOULD NONE THE LESS BE ATTEMPTED!
yeh i upped voltage to 2.1v, and used Kets modded P5Q deluxe bios 1403 and it pushed read to 8400mb, write to 7275mb and copy to 8050mb. got trfc to 48 from 60, havent tried lower and other timings are as low as possible from bsod lol and memtest and prime95 stable at 1000mhz.
should try 1066mhz, how much difference will it make?
Lian Li PC 354B - i7 3960X 4.8Ghz 1.39v - Asus Rampage Gen IV - Samsung Green 4x4GB 1866Mhz - Asus 5870 1GB - Corsair TX 650 - Corsair H80i
Was that using the 3:5 divider?
Could you show a screen shot with cpuz cpu & memory tabs and asus probe showing vdimm open?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Posting Permissions
Reply With Quote
Bookmarks