Quote Originally Posted by NapalmV5 View Post
http://img8.imageshack.us/img8/3061/94449032bo5.jpg

cryptik would you confirm for me D21 thru D14 as being VID7 thru VID0 ?

if so.. D19/D15/D14 being occupied.. would it suggest a reference voltage of 1.39375 ?

if so.. moving D19 -> D18/D15/D14.. would that make it a reference voltage of 1.49375 ?


or do i need more sleep.. thanks
Well those two patterns do match the patterns from the VR11 8bit table referring to the two voltages you mentioned. However I'm not sure what 'reference' voltage you refer to is.

In theory just altering the vdiff signal at pin 17 should be sufficient to raise/lower vgpu as necessary.

If you are thinking there is a maximum limit of 1.39375v imposed on the vgpu byt the diode arrangement, the only real way to test that semi-safely is put the card on water using a full cover block (covering mosfets as well) or even DICE if you have a pot and insulation and ramping the vgpu up.