*HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

**Yellowbeard** · 02-12-2009, 11:24 AM

Originally Posted by ChaosAD

You get what i mean

LOL...sorry, it's the medication and lack of coffee

They might get close but, all joking aside, if a part destined to be a 2000C7 won't pass the screen for 2000C7, we test it again and validate it at 1866. If it passes our screen for 1866, then that's what it is sold as.

**cstkl1** · 02-12-2009, 11:27 AM

Originally Posted by Yellowbeard

LOL...sorry, it's the medication and lack of coffee

They might get close but, all joking aside, if a part destined to be a 2000C7 won't pass the screen for 2000C7, we test it again and validate it at 1866. If it passes our screen for 1866, then that's what it is sold as.

so do u have anything validated for 2000 C7 in stock atm??

**Yellowbeard** · 02-12-2009, 11:35 AM

Please check at the Corsair Store:

https://shop.corsair.com/store/default.aspx

**cstkl1** · 02-12-2009, 11:39 AM

err no stock as it was a few minutes ago..

will be there any stock today or will it be pushed back again??

3.38 a.m. and waiting. :yawn

**Yellowbeard** · 02-12-2009, 11:43 AM

I have no way of monitoring that other than via the store interface. Sorry

**cstkl1** · 02-12-2009, 11:45 AM

np just wishing somebody can tell me.
somebody

**cstkl1** · 02-13-2009, 07:12 AM

love my fiance for getting me this ram kekeke

hey bachus u guys cheated lucky was refreshing

said 7.00 a.m 1500gmt but it was on sale at 6.59 a.m.
cut and paste and done.

just waiting for tracking order.
7.01 a.m. sold out..damn

**posershadow** · 02-13-2009, 07:33 AM

interesting, new 6gb set at 2000mhz at 8-8-8-24.

**Gunslinger** · 02-13-2009, 07:36 AM

I wonder if my 6GB 1866 C7 kit will do 2000 8-8-8-24.....

**cstkl1** · 02-13-2009, 07:42 AM

poser will give reply to ure setting for 220 bclk later.

**ChaosAD** · 02-13-2009, 07:43 AM

New addition in corsair shop. 6Gb Dominator 2000c8 same price as 1866c7. Hmm.

**ChaosAD** · 02-13-2009, 07:45 AM

Originally Posted by Gunslinger

I wonder if my 6GB 1866 C7 kit will do 2000 8-8-8-24.....

No need to wonder since as i already posted is at the same price. Is there a large gap in perforamance difference between 2000c7 and 2000c8, since c7 seems impossible to get.

**andyr(uk)** · 02-13-2009, 07:58 AM

Just placed my order for the 2000MHz, C8, 6gig kit , just need a board and chip now ,

**Yellowbeard** · 02-13-2009, 12:51 PM

Originally Posted by Gunslinger

I wonder if my 6GB 1866 C7 kit will do 2000 8-8-8-24.....

Gunslinger, did you see this yet? New beta BIOS:

http://www.evga.com/forums/tm.asp?m=...ey=&#100463965

**ChaosAD** · 02-13-2009, 01:44 PM

Can someone post an Everest v5 Mem bench for 2000 7-8-7-20 and one for 2000 8-8-8-24? I would really like to see the differences.

**Gunslinger** · 02-13-2009, 02:08 PM

Originally Posted by Yellowbeard

Gunslinger, did you see this yet? New beta BIOS:

http://www.evga.com/forums/tm.asp?m=...&mpage=1&key=?

Sweet, thanks for the heads up. I will give this a try this evening.

**slim142** · 02-13-2009, 02:21 PM

Gun
Please let us know how good those sticks overclock!

**dinos22** · 02-13-2009, 02:33 PM

Originally Posted by Wired-HoH

Correct, I did, however there's more to the thread:
http://www.asktheramguy.com/forums/s...ship+australia

At the time I posted, the Corsair shipping info stated that they did not ship internationally or to P.O. boxes (which I quoted within the thread). After I posted that I emailed Ram Guy about it. That was on Saturday. Monday they updated the store shipping information to state it was international shipping. First thing monday morning Ram Guy posted this info in that same thread I linked to above.

So as long as people read the whole thread chronologically, they'll be fine

it was just word of mouth for me
iwasnt aware of the thread

all good then
the guy that told me about shipping advice needs to read it all properly heheh

**Gunslinger** · 02-13-2009, 04:07 PM

Originally Posted by slim142

Gun
Please let us know how good those sticks overclock!

I'm such a noob compared to what you normally see here, I'd be almost embarassed to post anything.

**slim142** · 02-13-2009, 04:23 PM

Originally Posted by Gunslinger

I'm such a noob compared to what you normally see here, I'd be almost embarassed to post anything.

Well, I have not seen an i7 board BIOS yet so Im even more lost than you are when it comes to i7 overclocking!

**3oh6** · 02-13-2009, 11:29 PM

"that Hansel is so hot right now..."

Originally Posted by ChaosAD

Can someone post an Everest v5 Mem bench for 2000 7-8-7-20 and one for 2000 8-8-8-24? I would really like to see the differences.

keep in mind Everest is still a little wonky with i7 and read/copy can variate up to as much as 1K at any time, but here are the timings you asked for, along with a single 32M. the SPi is in Vantage with no tweaks so ignore the times, but you can compare the two as the conditions for each run were identical.

first up 7-8-7-20 2T...
click for full size...

and 8-8-8-24 2T...
click for full size...

i went with 2T on the DFI because it gives better bandwidth

**Oliver** · 02-14-2009, 12:19 AM

sweet Jody ...

guys prepare for canadian damage ....

keep pushing it

**ChaosAD** · 02-14-2009, 12:42 AM

Originally Posted by 3oh6

keep in mind Everest is still a little wonky with i7 and read/copy can variate up to as much as 1K at any time, but here are the timings you asked for, along with a single 32M. the SPi is in Vantage with no tweaks so ignore the times, but you can compare the two as the conditions for each run were identical.

i went with 2T on the DFI because it gives better bandwidth

I cant thank you enough for your post. Either +/- 1K in Everest is very clear that the difference is minimal. At least for someone that need them for an everyday pc and dont bench all the time

I just checked both pics again and the vdimm is 1.74v. Is this correct?

**3oh6** · 02-14-2009, 01:26 AM

Originally Posted by Oliver

guys prepare for canadian damage ....

someone has to represent for the red and white...couldn't think of a more appropriate kit to do so

Originally Posted by ChaosAD

I cant thank you enough for your post. Either +/- 1K in Everest is very clear that the difference is minimal. At least for someone that need them for an everyday pc and dont bench all the time

I just checked both pics again and the vdimm is 1.74v. Is this correct?

for daily use, don't even consider there to be a difference...benching 32M, that is a different story. the 2000 8-8-8 and 1866 7-8-7 kits are very nice looking kits for those that aren't going to need the extra little umph that the 2000 7-8-7 kits offer.

yes, i had voltage up to 1.75v set in BIOS. those screenshots above were literally the 3rd and 4th boot that i did with those sticks. i have no idea what voltage they needed so i went with 1.75v vDIMM and 1.55v VTT set in BIOS. they likely don't need to be that high for single 32M SPi. glad they were helpful for you

**Ghostleader** · 02-14-2009, 01:44 AM

Is there anyone how knows if it´s the same kind of IC in these two?

DOMINATOR GT, 6GB (3x2GB), 2000MHz, 7-8-7-20

DOMINATOR GT, 6GB (3x2GB), 2000MHz, 8-8-8-24

Thread: HOT | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | HOT

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions

Thread: *HOT* | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | *HOT*

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions

Thread: HOT | Corsair DOMINATOR GT | 6GB (3x2GB) | DDR3-2000 7-8-7-20 @ 1.65V | HOT