G.SKILL F2-9600CL5D-4GBPI Sample testing

**zsamz_** · 02-11-2009, 08:40 PM

Originally Posted by Jor3lBR

zsam, Damm I don't know what to do with you! I guess I'll have to end up sending one of mine UD3P's or Extreme to you or show an above 12000Mb/s screen!

well bud if you sent me a gigabut board i will have to send it back

Originally Posted by CryptiK

I think I know what zsamz is saying, the DFI UT P45 produces the best bandwidth of any P45 board I have seen for any given FSB / ram speed. It's faster than my Asus, and can clock higher too. It's not too far off the bandwidth of the UT P35 and that is no small feat.

Everest bandwidth/latency isn't the be all and end all though, I'd like to see some SPI32M & 3D runs of a UD3P vs a UT P45 at identical settings.

clock for clock dfi is faster than a gigabut and asus

**CryptiK** · 02-11-2009, 08:42 PM

Originally Posted by Jor3lBR

Very nice indeed I missed this post!

Now he won't be giving away his golden eggs will he?!

He's probably in Phase Change on those ram or Ln2 pots.

Thought it was dry ice and ~2.6v

**Jor3lBR** · 02-11-2009, 08:46 PM

Originally Posted by CryptiK

I think I know what zsamz is saying, the DFI UT P45 produces the best bandwidth of any P45 board I have seen for any given FSB / ram speed. It's faster than my Asus, and can clock higher too. It's not too far off the bandwidth of the UT P35 and that is no small feat.

Everest bandwidth/latency isn't the be all and end all though, I'd like to see some SPI32M & 3D runs of a UD3P vs a UT P45 at identical settings.

I know DFI has better bandwidth even my DFI X48 has, although I would like to compare same PL's just to make sure. So far we are comparing PL5 or 6 from DFI against PL 8 on the Gigabyte.

Originally Posted by zsamz_

clock for clock dfi is faster than a gigabut

I agree if tests would use same settings as Cryptek said but where will DFI be when you stop to bench the Quad at 4200Mhz and the Gigabyte goes on and on till 5000Mhz+++

Not fair with poor old DFI

**zsamz_** · 02-11-2009, 10:07 PM

Originally Posted by Jor3lBR

I know DFI has better bandwidth even my DFI X48 has, although I would like to compare same PL's just to make sure. So far we are comparing PL5 or 6 from DFI against PL 8 on the Gigabyte.

I agree if tests would use same settings as Cryptek said but where will DFI be when you stop to bench the Quad at 4200Mhz and the Gigabyte goes on and on till 5000Mhz+++

Not fair with poor old DFI

i built a system for a freind the idiot bought the gigabut p45-ds3p
i gotta a agree its an easy overclock for a quad 500x7 was a breeze on a q6600
but its not good enough in my book bandwidth is

btw i had to wash my hands with ajax after i built the system
the only quad i would consider is nahaleem

then i gotta sell my stash of d9

btw my ut p35 spankin my dfi x38 in bandwidth

**CryptiK** · 02-12-2009, 12:31 AM

Originally Posted by zsamz_

btw my ut p35 spankin my dfi x38 in bandwidth

Yep, P35 is still the fastest s775 chipset.

**Highgertz** · 02-13-2009, 05:52 AM

Hello all!

To disperse the 1608MHz to take dry ice and a ghetto-glass manufacturing

details here http://forums.topmods.net/viewtopic.php?t=2722

To improve specially fabricated copper-aluminum cup under nitrogen, but to the chagrin of success is not added. Stopped at 1608 MHz.

Tested with UD3 and UD3P, may limit the memory or the motherboard. Bad that nitrogen did not give any increase in the dispersal

**Shiranui Gen-An** · 02-13-2009, 05:56 AM

Originally Posted by zsamz_

then i gotta sell my stash of d9

*Gets in line for the D9s*

**Highgertz** · 02-13-2009, 06:09 AM

The glass on the chipset has added a lot of problems

details here http://forums.topmods.net/viewtopic....2dcb712889b278

For the first time, it was interesting to work with nitrogen

**Smartidiot89** · 02-14-2009, 05:16 AM

Is the 1200mhz CL5 stable on 2GB sticks?

Any idea of when these will be out and what the pricerange would be?

**zsamz_** · 02-14-2009, 06:48 AM

Originally Posted by Smartidiot89

Is the 1200mhz CL5 stable on 2GB sticks?

Any idea of when these will be out and what the pricerange would be?

price is around 300$ @ newegg if they have it in stock
a few more posts and you can see my set in the for sale section
this is 2.06v 1 pass of memtest 1306mhz
i only use high fsb i'm sure they can do more @ a lower fsb

**Roger_D25** · 02-15-2009, 11:41 AM

Yeah its very nice to have a 4GB (2 x 2GB) of RAM that doesn't hold you back when clocking! Before this kit RAM was usually the bottleneck when working on high CPU clocks. With that said why are you selling your sticks zsamz, just curious?

**zsamz_** · 02-15-2009, 03:45 PM

Originally Posted by Roger_D25

Yeah its very nice to have a 4GB (2 x 2GB) of RAM that doesn't hold you back when clocking! Before this kit RAM was usually the bottleneck when working on high CPU clocks. With that said why are you selling your sticks zsamz, just curious?

i got over 40 gigs of ram

and i just bought more the funny thing is i got a few sets that i havent even opened

and i just bought 2 more sets

another stupid move my board doesnt even like d9gkx

i should be sellin all my d9 n keep my gskills they are the best sets i own but i cant seem to wanna part with any of my collection
i got an itch to go ddr3 but it feels like cheating

**Roger_D25** · 02-15-2009, 04:08 PM

I kinda know how you feel, I've still got a few kits of D9's (Cellshock DKX and a Crucial GMH) and even though I don't use them much I still keep them around for low latency fun (at least until I make the switch to DDR3). By the way I just read through your specs and you weren't kidding around about having lots of RAM (infact you may have a problem), lol!

**zsamz_** · 02-15-2009, 06:54 PM

Originally Posted by Roger_D25

I kinda know how you feel, I've still got a few kits of D9's (Cellshock DKX and a Crucial GMH) and even though I don't use them much I still keep them around for low latency fun (at least until I make the switch to DDR3). By the way I just read through your specs and you weren't kidding around about having lots of RAM (infact you may have a problem), lol!

i was asked by an admin to make my spec list shorter
so its not all there

i got 6 more pcs @ home n many older parts
and yes i got a big problem i hate sellin my toys

**neo mike** · 02-15-2009, 07:02 PM

No doubt Z is a computer JUNKIE TO THE MAX

, saw your g.skills for sale here, your asking to close to new price, good luck.

**zsamz_** · 02-15-2009, 10:02 PM

Originally Posted by neo mike

No doubt Z is a computer JUNKIE TO THE MAX

, saw your g.skills for sale here, your asking to close to new price, good luck.

50$ less than retail lol + i payin the shippin
its proven stix
not newer revision that might not hit 1300

to be honest i dont care if they sell or not lol

**CryptiK** · 02-15-2009, 10:13 PM

zsamz why dont you get all your D9 framed and hang them on the wall? Set them in a sheet of foam or something with little pockets for each stick and frame them, that would make great wall art

I'm not joking either.

**zsamz_** · 02-16-2009, 03:04 AM

Originally Posted by CryptiK

zsamz why dont you get all your D9 framed and hang them on the wall? Set them in a sheet of foam or something with little pockets for each stick and frame them, that would make great wall art

I'm not joking either.

are you nuts the foam can have static electricity n kill em

i still got some nice tccd sticks from the old days

**jobol** · 02-20-2009, 04:22 PM

I am really impressed by your overclocks. These sticks are good, but mucho $$$

**radaja** · 03-07-2009, 02:00 PM

just a quick test with my new 9600's on my UD3P with my 9650.thanks zsamz

**WaterFlex** · 03-07-2009, 03:40 PM

Very good job radaja

**zsamz_** · 03-07-2009, 04:14 PM

Originally Posted by radaja

just a quick test with my new 9600's on my UD3P with my 9650.thanks zsamz

uw enjoy
but u should be goin alot higher

**radaja** · 03-07-2009, 04:28 PM

zsamz,well i just got this board yesterday and im still feeling it out and the ram also.i will be going higher soon.
thanks waterflex.

**radaja** · 03-09-2009, 06:19 PM

heres my latest with the 9600's,i think i can drop the vdimm to 2.14 and still be stable.

**zsamz_** · 03-09-2009, 07:06 PM

Originally Posted by radaja

heres my latest with the 9600's,i think i can drop the vdimm to 2.14 and still be stable.

verry nice with a quad
how much nb volts u usin?

Thread: G.SKILL F2-9600CL5D-4GBPI Sample testing

Thread Tools

Search Thread

Rate This Thread

Display

junkei

Bookmarks

Bookmarks

Posting Permissions