GIGABYTE Challenge Dual Channel DDR2-1508 Record-- WIN 1,500 US$ CASH !!!

**Aerou** · 02-01-2009, 03:08 PM

anyone find a BIOS particularly better for high memclocks?

BTW can anybody tell anything more about the rejected cpu-z results? any idea what is causing it?

**Hazzan** · 02-01-2009, 10:44 PM

Originally Posted by [XC] Aerosupra

anyone find a BIOS particularly better for high memclocks?

BTW can anybody tell anything more about the rejected cpu-z results? any idea what is causing it?

All bios same with high memclock..I try from F3.F4.F5 and F6 all the same for higher memclock...try lower PL on static value on bios maybe you can get higher better memclock...

**Aerou** · 02-02-2009, 09:49 AM

ANYBODY EXPERIENCED CPU-Z REJECTION and found a SOLUTION or CAUSE?

**the-strokes** · 02-02-2009, 11:53 PM

try 9x multi or default..and disable c1e

Originally Posted by [XC] Aerosupra

ANYBODY EXPERIENCED CPU-Z REJECTION and found a SOLUTION or CAUSE?

**redratamd** · 02-06-2009, 01:49 PM

With my crappy kit

No Vmod for the moment . Just 1.62V VMCH & 3V VDimm & LP 10 .

Picture of memory

Edit :

1680MHz under DI

Always no Vmod but 3.04V bios & 1.66V VMCH and some windows tweaks .

Just for the fun a run @800MHz 5-5-5-15 TrFC 60 LP9
Don't look the time .

Tweaks ,it's for a memory frequency not for the performance .

Edit 2 :

One stick is dead : RIP

Edit 3 :

Same thing with Crucial .

**Aerou** · 02-07-2009, 01:05 AM

Red, you should have put some Sandra or Everest benches at the 800

But sweet results, sprry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

**Vivi** · 02-07-2009, 03:14 AM

Originally Posted by [XC] Aerosupra

Red, you should have put some Sandra or Everest benches at the 800

But sweet results, sprry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

all of the above

. haha my ocz's died to volts, was 3.3 for long then 1 run at 3.4 and one stick died ( -100c)

**redratamd** · 02-08-2009, 01:31 AM

Originally Posted by [XC] Aerosupra

Red, you should have put some Sandra or Everest benches at the 800

But sweet results, sorry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

Not installed ( everest & sandra ) on this hdd ,sorry. But Giga it's not faster .
When ,i've changed memory . 2.2V ,no fan it's too hot for her . SpI 32M runned ,go bsod and no reboot . I've killed her . That's the game

Originally Posted by Vivi2

all of the above

. haha my ocz's died to volts, was 3.3 for long then 1 run at 3.4 and one stick died ( -100c)

RIP too

Every bios ,every settings 2.9V same results with 6 different sticks single or dual ,different slot . Any multiplicater ,any CPU . I've tried to put some sticks direct on the NB hs . Same results . 840MHz . I've tried 5:8 in strap 333MHz ,835MHz.
I think that's the mobo limit . I do 810MHz on air , 820MHz with my icy air spray ( around - 40°C ) and 840MHz under DI .
Maybee flash the bios for an UD3R ,they are on podium . Maybee better .
I will do that just before the limit date .

**Shahryar_NEO** · 02-08-2009, 03:35 AM

i need more and more voltage and i think that i need external voltages to ram . is there anybody here that have some idea about use external voltages for modules ?

thanks
Shahryar

**Vivi** · 02-08-2009, 06:04 AM

well,

i got 829 3.04 stock max voltage (-79C)
then 832 3.1 - 3.2 ( -85c)
then 838 3.3 (-100C)

so there is increase, but very little

**ME4ME** · 02-08-2009, 01:56 PM

guys i have the same problem with validation files that get rejected..

i found this:

http://forum.canardpc.com/showthread.php?t=32274

That seems to be the awnser for my situation, because i uploaded a 5ghz validation, and all my other validations that were lower (because of FSB testing) were rejected..

so it seems you have to wait for at least 5 minuts between each submission..

**toyone** · 02-10-2009, 08:42 AM

Crucial Ballistix Tracer
ep45-ud3r
Dry Ice

my pot

score:

**Vivi** · 02-10-2009, 10:32 AM

lol

**toyone** · 02-10-2009, 11:05 AM

1:2 it is bad

**Hazzan** · 02-10-2009, 11:46 AM

Originally Posted by toyone

Crucial Ballistix Tracer
ep45-ud3r
Dry Ice

my pot

score:

nice .....keep pushing just with dry ice

try with another diveder...3:5 bugs...

**toyone** · 02-10-2009, 12:02 PM

Originally Posted by Hazzan

nice .....keep pushing just with dry ice

try with another diveder...3:5 bugs...

thanks
the rest of the settings not so good

**Vivi** · 02-10-2009, 01:01 PM

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

**toyone** · 02-10-2009, 01:11 PM

Originally Posted by Vivi2

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

ok, thx

**redratamd** · 02-12-2009, 11:03 AM

Originally Posted by Vivi2

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

Why you can say that ?

**youngpro** · 02-12-2009, 10:36 PM

???

**Vivi** · 02-12-2009, 11:15 PM

way 2 go james!! you wont post a threat if it isnt worth something, this should be high

**[XC] Oj101** · 02-13-2009, 04:20 AM

Very nice show us more

Unfortunately I don't think it'll cut the grade as the competition draws to a close though. Let's see what happens

**redratamd** · 02-13-2009, 07:08 AM

Originally Posted by youngpro

???

Very nice

**[XC] Oj101** · 02-13-2009, 07:11 AM

882MHz

**Shahryar_NEO** · 02-13-2009, 07:45 AM

Originally Posted by Oj101

882MHz

who ?! where is validation ?! it's time to show our back ups

Thread: GIGABYTE Challenge Dual Channel DDR2-1508 Record-- WIN 1,500 US$ CASH !!!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions