Quote Originally Posted by CryptiK View Post
As Napalm said just bridge it with solder, the 'resistors' they use are 0 - 0.1 ohms anyway (basically a dead short between the 2 contacts). Max stable clocks did improve after the mod.

On my card (base model EVGA):

1/3/11 = 1.16 vgpu / 2.11 vmem
1/2/3/11 = 1.22 vgpu / 2.13-2.14 vmem

EDIT - bridged the 4th contacts (so now have: 1/2/3/4/11 bridged), now have 1.23 vgpu / 2.15 vmem under load, basically at SSC voltages now.

Raising voltage hasnt had a large effect on load temps, before mods on auto fan speed it was ~80*C in really heavy scenes of crysis, at 1.22v is was around 83*C, and now at 1.23v it's around 85*C (but today is warmer weather too). Fan doesn't go over 72%.
hmm. i just saw this. adding the 4th pin does infact give the extra .01 on vcore?