maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Yes I have the PC2-8000 .16fd3. Seriously they are the best pair of D9GHM chips I have. They are rock solid at 2.28 volts anywhere from 1150-1366 5-5-5-15 PL8. They clock higher then my PC2-8500 .16fd3. Good luck with them. I am comparing them to my Team Xtreem pc2-6400 D9ghm, Corsair PC2-8500 V1.2
There's a 8000 C4 kit on ebay which I'm tempted to buy because, unlike the one I'm trying to sell, it's in new condition and it works; however I'm not sure whether to fork out on more D9 because I could get 4GB of G.Skill for roughly the same £. Maybe I should lol.
If you're talking Cell Shock, yes they are GMH and they aren't so good (well not my kit). I can do 950Mhz 4-3-3-10 2.175 with my GKX kits together, but I have to loosen that to 4-4-4-15 with the GKX/GMH combo.Originally Posted by Cryptik
![]()
i7 920 D0 | TRUE Cu | ASUS RIIIE | 6GB Dominator GT | Gigabyte GTX480 Special Edition | Win7 Ultimate x64
thanks guys.
_________________________________________________
............................ImAcOmPuTeRsPoNgE............................
[SIGPIC][/SIGPIC]
MY HEATWARE 76-0-0
Some tests on air with my 2 kits
2x1GB Transcend Axe 800MHz @4-4-4-12 @1.8V and
2x1GB Transcend Axe 1200+ @5-5-5-15 @2.2V
both D9GMH.
Validation with 800MHz kit.
http://valid.canardpc.com/show_oc.php?id=501612
and some memtests with the same kit and 2.2V set on BIOS
http://img222.imageshack.us/img222/5...293e5e6qm8.jpg
For 24/7 I`m using P5K-E wifi, and it cant overclock RAM too good, but i can boot 600FSB with 1200MHz RAM @4-4-4-12 with the second kit, and 5-4-4-10 with the first one, but on UD3P it seems second kit cant clock more then the first one.
Here are results with the second one
http://img5.imageshack.us/img5/6863/...2887172iu1.jpg
2.3V BIOS, in dual channel its the same, but i didnt save a shot
and validation:http://valid.canardpc.com/show_oc.php?id=501519
No big diffrence cl5 or 6, on cl5 same as the first kit. Tonight i will try for 1500MHz but not so easy with 10C ambient
.
Thanks for the link, maybe I will have to get one of those pairs...
Nice collection you got there!
I'm still learning on my board, but I think now I'm on the right track.
This screen was made when I tested for max SPi 1M, primary aim was of course sub 10s:
By don_dan at 2009-02-07
My 2 kits of D9GMH waiting for first Di Session :]
Crucial Anniversary Edition 2,65V on Bios
Goodram Pro900 2,65V on Bios
This are max bootable settings for Pi. I think with some more V and clockgen/set FSB i can make a bit more :]
Goodram's make's 600Mhz Cl5 on 2,2V i can't more beacause this is max of my mobo :/
Crucial AE not testes on Cl5 but i think it will be the same or a bit better.
Last edited by Borys; 02-07-2009 at 05:43 AM.
CPU: Intel C2D E8500 (4000Mhz@1.17V) / Intel PDC E5200 (4000Mhz@1.4V)
MOBO: Asus Rampage Formula X48 / Asus P5K-E WIFI-AP
MEM: 2x2GB Apogee GT 5-5-5-15 (1000Mhz@1,9V) / 2x2GB Apogee GT 5-5-5-15 (980Mhz@1,9V)
GPU: ASUS GTX285 Ultimate Edition 1024MB / Asus 8800GTS 512MB
HDD: Intel X-25-V 40Gb + Samsung F4 2TB / 2xSamsung F1 640GB
PSU: Be Quiet Dark Power P7 550W / Corsarir HX520
LCD: Dell U2410 / Dell 2209WA
Here is some Teamgroup at 587 cas4 at 2.44v.
Too bad I do not have time to taste that dinner![]()
So are all these 2.0v Crucial Ballistix at Newegg newer non D9 variants? Just curious to know even though some people are reporting that the 2x2GB PC2-6400 are good clockers.
http://www.newegg.com/Product/Produc...TabStoreType=1
Intel Core2Quad Q6600 4.1Ghz@1.68v 3.6Ghz 24\7|EVGA nForce 680i SLI|BFG Tech 8800GTX 675Mhz\1566Mhz\2106Mhz|Team Group Xtreem PC2-9600 1266Mhz|Custom WC Kit CPU\GPU\PA120.2|
You mean the regular Ballistix with the yellow heat spreaders here?
http://www.newegg.com/Product/Produc...82E16820148212
Is the JKH newer than the GMH? Any advantages or disadvantages to them? I had some 2x1GB Corsair D9GMH that died but was looking for another set. Do they make D9GMH in 2x2GB? I'm looking for a cheap set of D9's preferably 2x2GB, anyone have any ideas or pointers on where I could pick some up? I'm in the USA. Thanks for the help and sorry for the 20 questions.
Last edited by Mr Roboto; 02-09-2009 at 03:16 PM.
Intel Core2Quad Q6600 4.1Ghz@1.68v 3.6Ghz 24\7|EVGA nForce 680i SLI|BFG Tech 8800GTX 675Mhz\1566Mhz\2106Mhz|Team Group Xtreem PC2-9600 1266Mhz|Custom WC Kit CPU\GPU\PA120.2|
PHWOAR! I'd hit that anyday!![]()
![]()
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Well, My Crucial Ballistix Tracers 2x1gb 16fd3have finally dumped!
Well, 1 stick did, the other is still good, but considering the reliability record of these wonderful hot rods it proably isnt to far behind the bad one.
Anyways was doing 4x1gb on asus p5k deluxe, would like to go 2x2gb now.
Guys, What are your recommendation for the best 2x2gb ddr2 dual channel sets currently out? I do overclock and heavy gaming. currently running the Crucials @ 1075mhz 55515.
Was looking at the Patroit Viper 8500 2x2gb, are there any 2x2gb d9's out there.
Thanks![]()
Q6600 on Asus P5k Deluxe bios 0404
Dualboot WinXPsp3/Win7 64
EVGA GTX 580 & XFX 8800 GTS 640mb PhysX
4gb 8500 Crucial Ballistix Tracers
2 x WD 74gb Raptors Raid 0
2 x Samsung 1TB @ 2TB Raid 0
Thermaltake Armor case
Thermaltake 850w pwr supply
Koolance Exos water cooler
The only D9's in 2 x 2GB sticks are D9 JKH and they are not very good, they might do 500 - 550MHz CL5. The best 2 x 2GB sticks are the G.Skill 9600's, they do 600 MHz + at CL5. They are expensive though.
D9 GKX and GMH only come in 1GB stick form, due to the IC size. Each GMH/GKX IC is 64M and a double sided 1GB module has 16 IC's (64M x 16 = 1024M).
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Alright guys I know I'm killing you with all these questions but please bear with me as I find myself being very fascinated with these D9GMH's all of the sudden.
So when hunting for the 2x1GB PC6400 or PC8500 Ballistix are all the 2.2v C4 versions D9GMH or other D9 variant? I noticed on Ebay there are some being sold that are advertised as lot 16FD3 which are presumably the golden sticks so to speak, however they're charging double compared to other Ballistix C4 2.2v D9's.
Basically what I'm asking is are the lot number 16FD3 all that important in hopefully getting a high binned part? Are all 2.2v C4 Ballistix D9GMH?
Thanks for you time.
Intel Core2Quad Q6600 4.1Ghz@1.68v 3.6Ghz 24\7|EVGA nForce 680i SLI|BFG Tech 8800GTX 675Mhz\1566Mhz\2106Mhz|Team Group Xtreem PC2-9600 1266Mhz|Custom WC Kit CPU\GPU\PA120.2|
the important thing is to get 16fxxx pc2-8500 or pc2-8000
the other stuff not worth it
i got a set of pc2-6400 16fd3 and it suks just my luck lol
you can always try your luck but if you do get real old stock with the clips
and be carefull lots of degraded sticks on ebay
i just bought 2 sets of d9gkx to add to my collection lol i couldnt resist 2 sets for 50$
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
stay away from patriot and buffalo firestix 4 gig sets
i would not buy no d9 4 gigs sets unless you feel xtremely lucky
many good powerchip rated pc2-8500 gonna get you around 1100mhz
my gskills pc2-9600 do 1300mhz 2.06v they are the best ddr2 imho
put the bad stick in the freezer for an hour you might get lucky![]()
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Interesting comparison there, very surprised to see CL6 @ 633 coming out on top. Were they the same Crucials at 571.4 MHz CL5? Whats the max totally stable speed they can do at CL5 on ~2.0 - 2.1v?
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Last edited by zsamz_; 02-10-2009 at 08:06 AM.
maximus IV extremegtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52vgtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35rampage extreme
gigabut p35c-ds3r![]()
bios suks
gigabut x38-d6qdead thank god
ballistix 8500![]()
1240mhz@2.02v
Bookmarks