Results 1 to 25 of 2960

Thread: Live MB OC Report :: ASUS Rampage Extreme

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Surrey, UK
    Posts
    214

    Smile

    the best two of three 32M runs i did at this clock: passed all three, so possible i could have stayed
    with same mem timings as 580FSB run

    sub 9 minutes seems almost in reach now, but balancing this kit's clocks + timings with stability
    starts to get difficult around 950mhz (595FSB / 5:8)

    With luck the weather will stay cold enough this week - max CPU and NB temps were <30c with 32M load

    590 x 8.5 / 5014mhz




    vNB 1.55V (set) / vDIMM 1.97V (set) / vCORE 1.53V (set) LLC on

    (maxmem 680 / LSC / SpiTweaker CW )




    used CDT for this one and went back to tRAS 12. Run speeds up at Loop 4, compared to above.

    (maxmem 680 / LSC / SpiTweaker CDT )

    http://www.hwbot.org/result.do?resultId=819742




    i don't know specific 1M tweaks - just ran this after my 32M.
    Will try a higher clock for sub 9 seconds next time, but 32M is the priority.


    Maximus V GENE [0086] :: 3770K L212B244 :: H70 :: EB3103A (PSC)

    CL|WCL|RTL performance (SB) : 32M scaling charts : PSC WCL > CL performance bug



  2. #2
    Xtreme Member
    Join Date
    Aug 2008
    Location
    Surrey, UK
    Posts
    214
    back down to 7.5x multi to test again for lowest mem timings using 590-595FSB. I managed this run at 950mhz with almost same timings as the 571FSB run (tRFC 52 to 56) Trying to minimize the clocks needed for sub 9 minutes with 8.5x multi

    i could only pass 32M by dropping max mem size to 580MB (from 680). Could be some cost to that but not tested yet.


    vNB 1.57V / vDIMM 1.98V / C/Waza not used


    Maximus V GENE [0086] :: 3770K L212B244 :: H70 :: EB3103A (PSC)

    CL|WCL|RTL performance (SB) : 32M scaling charts : PSC WCL > CL performance bug



Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •