DFI DK X58-T3eH6 on Test

[Supershanks]

The Clocking, Benches Observations and Bios settings Section >=24 has full bios settings to crib from.
General advise I guess :-

1. Your vdimm and cpu vtt should stay within 0.5v of eachother if possible
2. Keep Uncore Frequency X2 that of Dram Frequency. so for example
   RAM Frequency: BCLK*08 MHz
   Uncore Frequency: BCLK*16 MHz
   The Bios automatically adjusts Uncore if you increase memory multi, but doesn't work if you decrease memory multi.
3. QPI bus needs to be set to the lowest it'll go, its auto by default, but for maybe >=200, you will need to set it to 4800gt/s
4. hyperthreading and turbo mode will effect your clocks the higher you go, I've managed 210x20 ok but if going further you may need to disable them.

Still exploring SuperVID