The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[Grnfinger]

For those having USB issues up your damn SB volts and update to the latest chipset drivers.

For other anomalies it would be helpfull if you stated what bios your running, as Asus has coded some major lately. Clocks speed for chip and ram would also be benificial. static read control and PL level are all relevant information that no one chooses to post, how about STOP posting about your problem untill you include the information required to help you.
Hard locks are usually vNB or tref values incorrect. The harder you tax the MCH the more volts you'll need to pump in to it. Cause your ram is rated for 2.1 - 2.2 volts dosent mean thats all you need, it's rated at that voltage for the rated speed, if you increase speed beyond its rating you might need to up the ram volts.
No offence to anyone that owns it but OCZ is crappy ram and is most likely what your problem is.

[viccan]

For those having USB issues up your damn SB volts and update to the latest chipset drivers.

For other anomalies it would be helpfull if you stated what bios your running, as Asus has coded some major lately. Clocks speed for chip and ram would also be benificial. static read control and PL level are all relevant information that no one chooses to post, how about STOP posting about your problem untill you include the information required to help you.
Hard locks are usually vNB or tref values incorrect. The harder you tax the MCH the more volts you'll need to pump in to it. Cause your ram is rated for 2.1 - 2.2 volts dosent mean thats all you need, it's rated at that voltage for the rated speed, if you increase speed beyond its rating you might need to up the ram volts.
No offence to anyone that owns it but OCZ is crappy ram and is most likely what your problem is.

Ok here we go :

cpu= 1.216
cpu pll = 1.616
fsb term= 1.392
dram = 2.16
nb = 1.632 (just upped to 1.68)
sb = 1.088 (just upped to 1.136)
sb 1.5v = 1.552
dram controller v = 1.088
3.3 = 3.232
5v =4.992
12v = 12.152

cpu multiplier = 9
fsb = 425
fsb strap = auto
pcie freq = 100
ddr freq = 1066
dra,m command rate = auto
dram commmand skew (ch. A+B)= auto
dram clock skew (ch A+B) = auto
dram timming 5-5-5-15-3-54-6-3
2nd info = 8-3-5-4-6-4-6
3rd info = 14-5-1-6-6

dram static read = auto
a.i. clock twister = auto
a.i. transaction booster = auto
everything else set to auto except loadline calibration is enabled

again cpu pll is set at lowest setting available 1.5 yet it registers 1.616
and cpu voltage is set to 1.23125v but is registering 1.216v

Bios is asus formula rampage 0701 (latest bios avail. for multiple ati 4870 cards)

hope this helps you help me thanks