BloodRage RAM Compatibility List

[BenchZowner]

Let's try to build a RAM ( Memory ) compatibility list for the Foxconn BloodRage

I've personally tested the following memory kits on the BloodRage with the G13 BIOS and had no issues at all:

Compatible ( Working Fine )

CellShock DDR3-1800 8-7-6-21 2GB Dual Channel Kit ( CS3222580 ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
SuperTalent DDR3-1866 C8 2GB Dual Channel Kit ( W1866UX2G8 ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
CSX Diablo DDR3-2000 2GB Dual Channel Kit ( DIABLO3-2000-2GB-KIT ) - SPD Tool v0.63 dump file - Thaiphoon Burner 6 dump file
A-Data Vitesta Extreme Edition DDR3-1333+ 3GB Triple Channel Kit ( AD31333E001GMU ) - SPDtool v0.63 dump file - Thaiphoon Burner 6 dump file
Corsair Dominator DDR3-1800 C7 2GB Dual Channel Kit ( TWIN3X2048-1800C7DF )
Corsair Dominator DDR3-1600 6GB Triple Channel Kit ( TR3X3G1600C8D )
Corsair Dominator DDR3-2000 C7 6GB Tripple Channel Kit ( ? )
Corsair Dominator DDR3-2000 C7 3GB Tripple Channel Kit ( ? )
Corsair DDR3-1866 C9 6GB Tripple Channel Kit ( TR3X6G1866C9D )
SuperTalent DDR3-1600 C7 2GB Dual Channel Kit ( W1600UX2G7 )
G.Skill DDR3-1600 6GB Triple Channel Kit ( F3-12800CL9T-6GBNQ )
OCZ DDR3-1600 Platinum Edition 3GB Triple Channel Kit ( OCZ3P1600LV3GK )
OCZ DDR3-1800 Platinum Edition 2GB Dual Channel Kit ( OCZ3P18002GK )
Mushkin DDR3-1600 6GB Triple Channel Kit ( 998679 )

I will upload their SPD dumps on my FTP and link them here so you can try them out if you're having compatibility issues with your sticks.

[saaya]

sweet! thanks a lot bill!
im heading for the office now and will work on BloodRage and Destroyer compatibility lists and some other stuff
I finally got a new 3G modem, this time one that WORKS :P
in case anybody from asia reads this, stay away from china telecom 3G!!! they may have the most antennas, but the speed and reliability is terrible :P

[Touge180SX]

I'll add to the list Bench!

Corsair Dominator 6GB (3x2GB) DDR3 1600 (PC3 12800) TR3X6G1600C8D works and is rock solid! At 1.64V VDIMM 2100Mhz fully Memtest86+ stable!

[EnisDonKing]

Tested with BloodRage:

G.Skill 6GB (3x2GB) DDR3-1600 (PC3-12800) || (F3-12800CL9T-6GBNQ) || CL 9-9-9-24 @ 1.6V

With P03 BIOS I was able to select XMP profile for those modules.

[BenchZowner]

List updated.
Gonna upload some of the SPDs later on.

[ICEEXOL]

Kingston DDR3-1066 2 x 1 GB kit CL7 (KVR1066D3N7K2/2G) works fine.

[s002wjh]

anyone try the ocz platinum series?

[JudgmentJay]

anyone try the ocz platinum series?

Also interested in this, but if noone knows I suppose I'll be able to answer on Tuesday or Wednesday.

EDIT: Make that Thursday! PSU DoA

[JudgmentJay]

3x1gb OCZ Platinum working fine @ 1600mhz 7-7-7-24.

[BenchZowner]

3x1gb OCZ Platinum working fine @ 1600mhz 7-7-7-24.

Can you post the exact model number for your kit ? ( it's something like OCZ3blahblah )

[JudgmentJay]

Can you post the exact model number for your kit ? ( it's something like OCZ3blahblah )

My bad, it's OCZ3P1600LV3GK.

[BenchZowner]

Updated.
I'll upload some SPDs in a bit

[INFRNL]

when are we going to get an update. I should be testing some Supertalent 6gb 1600 cl9 and Mushkin 6gb 1600 cl7; hopefully this weekend after ram gets in. not sure if anyone has already confirmed either of these yet

[Telo]

You can add OCZ DDR3-1800 Platinum 2GB Dual Channel kit [OCZ3P18002GK].
Currently running it at DDR3-1600 8-8-8-24 on 1.60v [testing while Dominator GT comest out]

[dreagnon]

I had some problems with the 6GB Kit of :

OCZ Intel Extreme OCZ3X1600LV6GK

it always stops at Post code 26.

Afterwards I installed the Dominator Kit and it works fine with the same settings

[saaya]

when are we going to get an update. I should be testing some Supertalent 6gb 1600 cl9 and Mushkin 6gb 1600 cl7; hopefully this weekend after ram gets in. not sure if anyone has already confirmed either of these yet

couldnt find either of those kits here... ill check again...

I had some problems with the 6GB Kit of :

OCZ Intel Extreme OCZ3X1600LV6GK

it always stops at Post code 26.

Afterwards I installed the Dominator Kit and it works fine with the same settings

Hmmm even with one stick installed?
thats an older kit so maybe it needs high vdimm...
What BIOS are you on?
Can you try G16 and enable virtual XMP and set the speed to DDR3 1333 and then switch the memory to the OCZ kit?

[BenchZowner]

If you guys could upload SPD dumps of your RAM with SPDtool v0.63 and Thaiphoon Burner v6,0,3,0 Build 0116 Final it would be great.
Clicking on the application name starts the download from my server.

I'll post instructions on how to read the SPD and save them as a file later on.

[BenchZowner]

To upload your SPD dumps use the following info:

1) Use your RAM's product code as a filename for the dumps
2) Upload them to my FTP using the following info:

ftp server address: ftp.benchzone.com
port: 21
account type: normal
username: spd@benchzone.com
password: spd

You can use a FTP client like FileZilla to upload the files to the FTP.

[BenchZowner]

I uploaded some SPDs and updated the first post

[VVJ]

BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!

[BenchZowner]

BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!

That would be greatly appreciated ( and useful )

[systemviper]

I'll be firing up my Bloodrage this week, i'll test Cellshock 1866' 3x1G but it's old style DDR3 plus i am getting Mushkin 3x2G 1600 cas 7set.

[saaya]

BenchZowner, cool thread! Thanks for your efforts! I can provide a free license for the latest Thaiphoon!

cool, thanks a lot man!

I'll be firing up my Bloodrage this week, i'll test Cellshock 1866' 3x1G but it's old style DDR3 plus i am getting Mushkin 3x2G 1600 cas 7set.

looking forward to your results!

[VVJ]

Everybody, who needs a free license just PM me your registration key from Thaiphoon Burner so that I could generate the activation key. Thanks for choosing Thaiphoon Burner!

[RayderR6]

I have had no problems with the OCZ 6GB kit (OCZ3P1600LV6GK), manual setting needed. Stock timings with 1T all day from 1066-1600. No problems with 7-7-7-20-1T in the same range. I have yet to pull off any 6 CAS even at 1066, maybe someone better than I could find the magic timings. I have not had the time to play above 1600 yet, but I will.

P03 and G13 confirmed. The 3Gig is already up, but nothing like being sure.