Asus M3A79-T Deluxe

[demonkevy666]

I'm getting low cmos on boot up, I just changed the battery and I'm still getting.
maybe Power supply is dying now ?
my bios is showing my 3.3 volt is low but it has been for sometime it's been 2.85 for a while but now it's 2.95 and now I'm getting this, cmos low

I don't think it save my settings either.
it won't boot if I change anything in the bios.

[gOtVoltage]

I'm getting low cmos on boot up, I just changed the battery and I'm still getting.
maybe Power supply is dying now ?
my bios is showing my 3.3 volt is low but it has been for sometime it's been 2.85 for a while but now it's 2.95 and now I'm getting this, cmos low

I don't think it save my settings either.
it won't boot if I change anything in the bios.

HONDAGUY ,, you try 4-5-4 -4 yet. Unganged ,, Timing is from top to bottom CAS,TCWL,TRCD,TRP


DEMONKEVY.....is it the PSU in your sig?
Try to test with another PSU ,, It dosnt have to be a big monster ,but any PSU that shows in this range of Volts (3.22v-3.32v )on the 3.3v would indacate ,,

Your PSU may have Flown south for the winter.

I know that the 12v shows 10v normally with any Bios on My PSU but my 3.3 and other volts are all Normal. Not Low. Im using only a 650watt PSU MAXED.

P.s.
ive had new dead batteries before .

also make shure your CMOS pin is in the Save position not CLEAR. Ive done that many times ( On Accident)with out hurting my Mobo's.

[HondaGuy]

HONDAGUY ,, you try 4-5-4 -4 yet. Unganged ,, Timing is from top to bottom CAS,TCWL,TRCD,TRP


DEMONKEVY.....is it the PSU in your sig?
Try to test with another PSU ,, It dosnt have to be a big monster ,but any PSU that shows in this range of Volts (3.22v-3.32v )on the 3.3v would indacate ,,

Your PSU may have Flown south for the winter.

I know that the 12v shows 10v normally with any Bios on My PSU but my 3.3 and other volts are all Normal. Not Low. Im using only a 650watt PSU MAXED.

P.s.
ive had new dead batteries before .

also make shure your CMOS pin is in the Save position not CLEAR. Ive done that many times ( On Accident)with out hurting my Mobo's.

Those timings are they for 800-1066 ? Only thing Ive tried was the 4 CAS Ram set at 1066