Got my new 3.0 NW!

[Gef]

A coupple of days ago, i asked you guys/girls here for an advice. I asked you of wich one to choose of the P4 2.8GHz M0 or a P4 3.0GHz uknown stepping. Well, after some answers i finally decided to go for the 3.0GHz!

Today i got it!!

Here is some numbers for ya

Prod. Code: BX80532PG3000DSL6WU
FPO#: L349A888

Ive been testing it for a coupple of hours now. Right atm im running it on 3,75GHz 1,575v. I have runned it for 3 hours in prime95 with 100% load woth no errors! I use the BOXED cooler, the temperatures are 62C idle and max load 64C. It's a little hot, but as long as its stable, i dont give a §§§§

I haven't abortet prime yet, because im gonna test it for a few hours, but so far, with 3 hours in prime, it looks good!

The ram runns on 5:4 (200MHz) 2-2-2-6.

In super pi 1M calc, i get 38sec

[Kanavit]

That's awesome. How did the capacitors look underneath? Like the prescott or Gallatin? My old 2.4b used B0 stepping and looked like the Gallatin with 1 missing. my new 2.8b D1 stepping looks like prescott.

[C0bra]

Nice, you were lucky with that chip! You wil probbaly see 4Ghz+ with water on it..

[C0bra]

Only one thing, wery odd temps you have.. the difference between idle and load is supposed to be MUCH more than 2c..

[doctorcod]

And the idle should not be that high, even with the stock cooler, unless your room is like 30c lol

[Gef]

I forgot to say that the idle temp i used above here is with 2 prime running...the windows idle temps are arround 44C.

the capacitors looked like this

[Kanavit]

i think you get a good chip.

[skate2snow]

cool man!!!!!!!!! Do you have some better cooling or youre always on stock cooler?

Give us some 2k1 bench. whats your card?

[Gef]

Originally posted by skate2snow
cool man!!!!!!!!! Do you have some better cooling or youre always on stock cooler?

Give us some 2k1 bench. whats your card?

I dont have any better cooling atm... in april im buying some watercooling or vappochill, so then i will see what this beast can do!

Later tonight or tomorrow, i will open the two windows i have in my room, and get things a little bit more chilly

I will run some 3dmark2k1 for you later, i have 9600XT (sig)...it's an OK card

Man, i love this chip!!

[althes]

Turn it up a notch on that card.

[enzoR]

youve got a killa chip there

[Nebulous]

Originally posted by enzoR
youve got a killa chip there

I cuncur! :thumbsup: Get some H20 on the badboy and crank it!

[J0k3r3]

Dont buy a vapochill! Ive seen many users waste their money and get crap

Get a prommy mach1 for $450 bnew w/ top case, lcd, and cpu kit!

Nice results btw and great chip

[Thelord]

very nice results 3.75ghz stable on air with 1.525v is amazing
i'm buying a 3.0 too...

[Gef]

Im sorry that i haven't kept you posted, but last night, i opened the windows, so thibgs got a little bit more chillyer yesterday! This is with the BOXED cooler.

[Gef]

nr2

[Gef]

It was too hot for me to even run at higher voltages, at 1,6v 4.05GHz the CPU had a temperature of 43C in BIOS. The room temp was 13C.

The CPU ran threw all the tests i put it threw, i forgot to run 2k1, but i ran 2k3 for ya. see sig

[enzoR]

that is insane!! so prime stable aswell? looks like you have a 5ghz cpu there

[Gef]

Originally posted by enzoR
that is insane!! so prime stable aswell? looks like you have a 5ghz cpu there

i didn't test it in prime because my mom whent insane when she saw that i had the windows open in the middle of the night, and that it was 12C in my room!

I ran the CPU threw lots of tests, sisoft, CPU mark, super pi, 3dmark2k3 and PC mark, there wasn't a sign for unstability.

You have no idea how much i whant some ln2 right now! How much does it cost? and where to get it?

[BuLkHy]

sl6WU? ...the bottom has the same design as the "M0" ones

[enzoR]

all the higher end D1's have the same cap arrangement as the M0 ones

[enzoR]

Gef, your cpu isnt even listed under the procspec finder of intel. only SL6Wk. maybe you have some E.T. cpu in your hands...

[Gef]

Originally posted by enzoR
Gef, your cpu isnt even listed under the procspec finder of intel. only SL6Wk. maybe you have some E.T. cpu in your hands...

hehe, well, is it that Intel's procspec finder is out to date? or is it just that i've recieved a special one?

[enzoR]

well it *should* have all the released CPU's on it. but since you have a 3.0, you probably have a special "custom" processor

[crotale]

A swedish store report that they have the SL6WU CPU...
I'm buying one!