I was willing to go to the moon on voltage, It just didn't like it. IIRC 1.6v was where i said screw it, playing with ACC atm don't know if it helps....
I'm sure onboard can limit the clock if pushing HTT, I'm just using the multi to find max clock to windows and max stable prime. FWIW max stable validation voltage required to max stable prime voltage is a huge difference.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
i was gonna say try at least 1.6v because sometimes they have like a voltage wall like my 9850 took nearly .1v more to validate @ 3.6 vs 3.7
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
Originally Posted by chew*
Yup...especially on a new install with few start ups and processes running. You can have a chip at the brink of stability pass a validation and then blue screen soon after and it maybe take .2v or more to actually make it prime stable.
Formerly XIP, now just P.
did someone say 4.0 on air?very cool hopefully i can share some results with you soon i have a ES on the way
and 3.8ghz is nice for air i saw 4ghz somewhere here though
http://valid.canardpc.com/show_oc.php?id=489990
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
great run bro
> 1.6v?
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
nah 1.575, I figured out my board just doesn't like 19 multi or higher so boot in and played with AOD, actually got to 4233 but didn't save it as I know I can do higher for just a cpu-z validation. Need to back memory off a tadwhen i do it next time. Now i know what I was missing should be a cinch from here on out.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Dang ,, nice work bronah 1.575, I figured out my board just doesn't like 19 multi or higher so boot in and played with AOD, actually got to 4233 but didn't save it as I know I can do higher for just a cpu-z validation. Need to back memory off a tad
"AMD...Like the perfect Storm,...Everything needs to be just right"
X555x4SuperCore@4450mhz@1.64v..........
RYZEN 7 1800x/ ASUS ROG STRIX VEGA64/ =EK NICKEL WB, Feser THC 2x360 1x480
X470 Gigabyte Aorus7, Patriot 3400mhz 16gb dual2x8
SSD Samsung 970pro,,860EVO
What kind of temps do you get with that OC chew*?
Sup Enjoy
AMD still fun after all.
@ Chew...My first killing.... Giga DS4H
Onboard video just went black screen. Probly better to use v. card when pushing all voltages. With Biostar NBv @ 1.5 I can go 2.9Ghz+ on NB freq.
With DS4H its > 2.8Ghz with high NBv and NB Vid.
DUMO, Board still work with a card?Sup Enjoy
AMD still fun after all.
@ Chew...My first killing.... Giga DS4H
Onboard video just went black screen. Probly better to use v. card when pushing all voltages. With Biostar NBv @ 1.5 I can go 2.9Ghz+ on NB freq.
With DS4H its > 2.8Ghz with high NBv and NB Vid.
ballpark of volts and temps and clock speed of NB when it happened dumo? Haven't touched anything but dram and cpu volts for now.
Which model biostar are you using? hows the PWM on it (temps). Price @ microcenter?
Frontline,
As for temps I'm controlling them at under 60C, chip becomes flaky after 58ish, holding them at 55C with various methods on air
For reference this heatsink is horrid, runs about 20C hotter than my true. Using it to show even with poor air High Oc's can be acchieved, the stock HS is likely comparable.
Last edited by chew*; 01-22-2009 at 05:52 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Indeed it is! My board arrives tomorrow and I'll be tweaking all tomorrow night, screw the bars.Sup Enjoy
AMD still fun after all.
@ Chew...My first killing.... Giga DS4H
Onboard video just went black screen. Probly better to use v. card when pushing all voltages. With Biostar NBv @ 1.5 I can go 2.9Ghz+ on NB freq.
With DS4H its > 2.8Ghz with high NBv and NB Vid.
Formerly XIP, now just P.
4.1 air done....apparrently it likes very fine tuning = less voltage 1.55v
http://valid.canardpc.com:80/show_oc.php?id=490258
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
what is you NB mhz and voltage at?
stock?
very nice btw!
air powa
AMD Phenom II 940 @ 3.5Ghz | OCZ Vendetta II | Gigabyte GA-MA790GP-DS4H 790GX | Mushkin Redlines 5-5-5-15 | XFX 8800GT XT 512MB @ 700/1050 | WD Raptor 36,74gig | OCZ GameXstream 850w | Cooler Master Cosmos 1000 | Samsung Syncmaster 2443BW | Logitec x530 5.1 | Windows 7 Home Pre.
217fsb and default volts. mem downclocked to eliminate it from the equasion.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
4.2g air done. Also page 1 has been updated.
http://valid.canardpc.com:80/show_oc.php?id=490528
Last edited by chew*; 01-22-2009 at 02:25 PM.
Here I am sitting with all the parts in hand except for mying memory because they needed a signature yesterday and they never attempted redelivery today. I am so pissed off I can't even tell you.
Formerly XIP, now just P.
Got 2 sticks here i can lend you....At least you will know how to get here saturdayHere I am sitting with all the parts in hand except for my.
Made progress on the DI tube, after an all day venture I found the insulation for it.....Stupid place i got it from last time no longer carries itGot to go get my mounting plate in a few. Hardware I'm praying ACE still has the springs and brass thumb screws, and then a trip to the art store for eraser.
Anyway give me a buzz if you want, you should have my number, and if you do come I can give you some loot to get me something at Microcenter to bring saturday
Last edited by chew*; 01-22-2009 at 04:56 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
I can't make it tonight, and I decided I still had ways to fill my time anyhow. I've assembling my HSPC tech station, mounting the board, and all the parts and taking my 500GB seagate out of my current system for use on the bench. That ought to take me the rest of the night anyhow and then tomorrow I'll just pick up the ram from the post office.Got 2 sticks here i can lend you....At least you will know how to get here saturday
Made progress on the DI tube, after an all day venture I found the insulation for it.....Stupid place i got it from last time no longer carries it
Anyway give me a buzz if you want, you should have my number, and if you do come I can give you some loot to get me something at Microcenter to bring saturday
Thanks anyhow though man.
Formerly XIP, now just P.
Nice oc !!! Did ACC help you ?
When i used ACC i got a less stable setup.
System Specs: -=Game PC=- | -=Lan Box=-
If you use a bios not supporting PH II yes, Note highest clocks I've done so far all have one thing in common "unknown cpu", for some reason although I have no explanation ( not supposed to make a diff with PH II ) I can clock higher with ACC enabled, I also don't need as much voltage.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Chew, out of the box it won't see my sata hd in all 6 ports, luckily I still have my old pata hd which is ok because I run PCI-e @ >110 with v card anyway.
So, I knew from the start that the chipset will go bonkers sooner or later.
Its Biostar 790GX AM2 @ microcenter.
Got a new Giga board here.
On air, started bios....
I use easy tune to go higher then K10 stat to find which core that weak/strong.
Last edited by Dumo; 01-23-2009 at 03:21 AM.
Nice stuff Dumo!
I'm setting up the bench as we speak, and trying to take pictures along the way. Just got the DFI board on the tray and about to mount the TRUE.
Formerly XIP, now just P.
Nice going guys!
I might load XP x32 on my new SSD drive and try to break 4GHz as well.
Tomorrow is Saturday, so I just need to give my wife £20.00 for shopping and I have 6 hours of tweaking in peace
BTW chew*, when you're going below 0C with Phenom??
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''Samsung LED 3D TV
Nice going guys!
I might load XP x32 on my new SSD drive and try to break 4GHz as well.
Tomorrow is Saturday, so I just need to give my wife £20.00 for shopping and I have 6 hours of tweaking in peace
BTW chew*, when you're going below 0C with Phenom??
I would have have said when I get off my butt and finish DIY Pot but I can't say that now as I just finished after a freaking hectic day.( having OC withdrawals )
Now I will use Enjoy as my excuse. When Enjoy gets off his butt and gets down here
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Posting Permissions
Reply With Quote
Bookmarks