The Phenom II List of Overclocks

[pershoot]

cybercat ->

set cpu state: p-1 (you can also play with this to see if it does anything for u; it did for me surprisingly), set NB to 2.0GHZ, HEX: 1D, leave HT link on auto, set auto for vcore, set dimm latency to 195 for all dimms (for now, since your running 8gb). u might need to +/- your dimm voltage. set ram timings to 5-5-5-18-23 for now. cnq should be disabled.

now try to see how high u get on stock v's (which is 1.31 for the dfi). go up to +50mv (sparingly; i.e. set +25 test, then +50) then observe how much more u get (this is stock v for the cpu).

dont use HT oc'ing for now, since it adds more stress (high HT) to the IMC needing more NB juice to be stable. u can sort that later.. and or use the dividers if you know your ram can handle it. try setting maxmemclk and your divider option for the option to get tighter timings.

u can also try setting pci-e to 101.