Quote Originally Posted by ci2kla View Post
Are you trying to say I have to stress everything at the same time to make sure the FSB is stable or not? I'm not sure what you mean...
Just done some extensive test. The reason why I choose IBT as the main testing tool is because it is the fastest tool to find out if the system is stable or not (of course not for 7/24). Calculation errors exists not only CPU but also can be other components related...for example...NB GTL vRef

Last Progress so far: 1.2v vCore, 1.32v VTT CPU GTLs all on auto, NB GTLs +70mv, IBT Test = Hard Lock / Reboot
With CPU GTLs slight fine tune, IBT Test 80% correctness, ORTHOS Large FFTs HARD LOCK after 1 hr 47 mins

Will start to try getting 485FSB stable after I'm off and will post up more if any progress made. Cheers
Give this a go and see what happens:

GTL 0 = +10mv
GTL 1 = -35mv
GTL 2 = +10mv
GTL 3 = -35mv

Also to test CPU use Small FFT's & IBT, large FFT's more tests the ram & NB. However if your cpu is quite unstable, it can still cause large FFT's to fail.