The Phenom II List of Overclocks

[Titan7171]

I hope this is real........seems a little out of touch with all the other people ocing. I mean I like these results but this seems to good to be true and with only .10 more volts than stock?? thats 1200mhz on just an extra .10v

[chew*]

I hope this is real........seems a little out of touch with all the other people ocing. I mean I like these results but this seems to good to be true and with only .10 more volts than stock?? thats 1200mhz on just an extra .10v

can it be so hard to achieve?

I'm doing the same with an intel chip prime stable......

Why would it be hard to believe for amd, sheesh my x2 3800 @ 90nm did up to 3.0 on .10 over stock.

Alot of overclockers just immediately go for the gusto and increase cpu volts expecting an uber high OC.

The ones that actually acchieve high clocks take they're time, tweak and give as little volts as possible......

If you look at his temps they are 33C which is just a tad below room temps, water cooling plus maybe an open window, honda whats load temps like? I'm guessing max 50C under a sustained load like prime for a few hours?

For reference a mach 2 pulled 1800mhz at boston event on .10 over stock........these chips do not scale well with voltage, they however scale higher at the same voltage when kept cooler.......when frozen below phase temps then you can throw volts at em.......

Its simple more volts = higher temps = less OC.........lower volts = lower temps = higher OC.......

[Titan7171]

can it be so hard to achieve?

I'm doing the same with an intel chip prime stable......

Why would it be hard to believe for amd, sheesh my x2 3800 @ 90nm did up to 3.0 on .10 over stock.

Alot of overclockers just immediately go for the gusto and increase cpu volts expecting an uber high OC.

The ones that actually acchieve high clocks take they're time, tweak and give as little volts as possible......

If you look at his temps they are 33C which is just a tad below room temps, water cooling plus maybe an open window, honda whats load temps like? I'm guessing max 50C under a sustained load like prime for a few hours?

For reference a mach 2 pulled 1800mhz at boston event on .10 over stock........these chips do not scale well with voltage, they however scale higher at the same voltage when kept cooler.......when frozen below phase temps then you can throw volts at em.......

Its simple more volts = higher temps = less OC.........lower volts = lower temps = higher OC.......

yes Ive seen all the info online......thanks, I see everything you see........but Im the type to have some doubts sometimes......I just wont flow with the grain because everybody is on a high and wants to believe everything they see. I really dont want to insult anyone but Im going to speak my mind if I feel something might look a little strange to me Im going to question it. But I also realize maybe hes running chilled water or something thats why I mentioned it

Like I said I hope these are the kinds of results that will be common......theres alot of ocers that been here for a long time that should be able to do the same. Anyway I wont mess up this thread any further........good luck with the overclocking guys.

[Oldguy932]

Shouldn't be too hard. My 940 seems to be doing 3.8ghz on stock voltage with a bios that doesn't even completely support it. I was able to install vista at 3.6ghz cpu and 2.4ghz nb with thos being the only settings I changed. No screens right now, I'll be working on that tomorrow while I do laundry before I go back to school along with getting everything installed on it. I didn't even take the time to put a wireless card in system yet so I have internet at the house. But the only thing that matters is that the vapo works, other than I put a connector on wrong because my lcd temp thing on the front doesn't show anything useful.