Air-Cooled 1600+ AGOIA Goodness...

N8 · 09-19-2002, 03:59 PM

I wish I could go more into it, but we're ready to go out for the night. So, I'll just leave a WCPUID shot of the highest I could get her so far(locked yet)...
This is my 4th 1600+ and I must say I'm very pleased so far

BBL w/ further test results

**TheHunter** · 09-19-2002, 04:38 PM

OMFG..... what's the stepping and the week is it again?
This is too good to be true... 200SB with locked CPU?!
Is it stable? what's the temp with which sink?

**OPPAINTER** · 09-19-2002, 05:04 PM

N8,

Thats ecxellent!!
What type of Air cooler do you have??

OPP

**Wolf** · 09-19-2002, 05:29 PM

Holy s_ _t man thats a golden cpu . I wonder how much you could get out of it on water and 2.3v or even better a prometia.

DaGooch · 09-19-2002, 05:55 PM

That might be one of those rare 2.20GHz to 2.30GHz Palominos with vapor compression.

**OPPAINTER** · 09-19-2002, 06:20 PM

DaGoochMeister,

How far was your 1600 doing with the Prometeia??

OPP

DaGooch · 09-19-2002, 06:27 PM

The best I can do with the XP1600+ that I have with 2.10V and running Prime 95 for 24 hours is:

**Machiavelli** · 09-19-2002, 06:43 PM

good lord, nice OC's .

You both cheat! especially you gooch

**Creative** · 09-19-2002, 06:45 PM

N8 that is freakin awesome man!!!!

There are some over at OCAU that would be very very jealous fo you dood....

CONGRATS

DaGooch · 09-19-2002, 07:38 PM

Originally posted by Machiavelli
good lord, nice OC's .

You both cheat! especially you gooch

Good to see you here Machiavelli! Cheat? You should know me better than that!

N8 · 09-19-2002, 08:25 PM

Yea, it is the first chip I've recevied to whoop up on my very first 1600+(the AROIA that is my avatar). It is cooled by a Thermalright AX-7 & Vantec Tornado.

Just got back from the bar so I doubt I'll make much sense here

Its a AGOIA 0213 Y, and I have another AGOIA 0213 Y also that won't even match my AROIA, let alone this AGOIA.

This is not a stable speed....yet. I will be happy if I can run 3DMark @ or above 2GHz

Right now my AROIA runs 3D @ 1.9GHz pretty much flawlessly. I'm not even sure that its not my Samsung holding me back at this point as the 2815 BIOS for the 8K3A seems rather hard on the memory.

A month or so ago I bought H2O equipment...just been too busy till recently to play with it. This chip may be the motivation I needed in that department

As for the temp, I don't know...no time to stress test @ this speed. All I know is that it was stable @ 1.85GHz @ default vcore, and 1.9GHz @ 1.85vcore. I can tell u what the temp was when i took that pic...about 27c w/ halt-cooling enabled, idle of course :P

Bad part is, I get about an hour to play with this chip, then I'm drug to the bar, and to top it off I'm leaving on vacation till monday...so no more playing till then! I will report back my further findings

**Chong345** · 09-19-2002, 08:34 PM

[N8],
that is one super OC! Congrats

Chong

**fireandsmoke** · 09-19-2002, 09:20 PM

[N8]
WOW, that's awesome. WHY did I go with xp2200??????????????
Save a hundred bucks and go FASTER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
F&S

**~~qwerty57~~** · 09-20-2002, 03:40 AM

{N8} i have a new agoia-y 0213 1600+ here also. I bought two from newegg during the craze the aroia-y i currently use runs at 1970mhz prime95 stable and will bench 3dmark alnight at 2ghz+ giving me some killer scores... I use the slk-800+80mm 75cfm fan also my aroia does 1.85ghz at default voltage prime stable but takes 2.04v to hit 2ghz on air. withh some h20 or vapor this chip could do 2100mhz+, now Im thinking about trying the agoia thats sitting here

**sforza** · 09-20-2002, 05:21 AM

Congrats [N8]

When I receive my AX7 I'll be doing some testing with my AROIAY, too.

**Marci** · 09-20-2002, 06:37 AM

And here I am struggling to get my new agoia y 0213 XP2000+ past 1.95ghz

Guess as well as my new western dig hard-drive I'll be fitting a 1600 tonight too... which also happens to be an agoia y 0213... bizarre!

**Bucket-head** · 09-20-2002, 08:07 AM

Awesome

**docah** · 09-20-2002, 08:42 AM

Nice o/c ... in fact that's incredible

My 1600+ agoia y chip will only run 1.800 @ 1.75 not voltage nor a cold michigan night has gotten me to 1.900 :-/ \Ii'm quite Frustrated by my system and the instability the radeon has slapped on me.

**LBJGH** · 09-20-2002, 11:11 AM

I'm holding my breath... I had to RMA my epox 8k3a+ and haven't had a chance to check out my AGOIA 'Y'. God I hope I get as good results with my Thermalright SLK800!

**~~qwerty57~~** · 09-20-2002, 11:13 AM

my slk-800+aroia-y 2ghz also im trying my agoia-y 0213 new 1600+ right now.. Ill post some screenys.. anyone know where i can get web space that allows file leeching for pics

Hardass · 09-20-2002, 11:18 AM

Send IFMU a pm he may be able to help you.

**QuadDamage** · 09-21-2002, 01:46 AM

OMFG! you clocked it to 200fsb locked on air? holy schmoley. my 1700+ will do so far 11x170 locked, haven't really pushed it yet, but your overclock is simply insane

**LORD** · 09-21-2002, 09:58 AM

That's pretty good dude. Congrats.

Heres one of mine at that level.

**Drozdov** · 09-21-2002, 02:51 PM

Originally posted by qwerty57
my slk-800+aroia-y 2ghz also im trying my agoia-y 0213 new 1600+ right now.. Ill post some screenys.. anyone know where i can get web space that allows file leeching for pics

www.imahosting.com click on the sig uploader

**Shroomer** · 09-21-2002, 06:47 PM

That is Insane dood nice OC there and one bad ass chip

Thread: Air-Cooled 1600+ AGOIA Goodness...

Thread Tools

Search Thread

Rate This Thread

Display

Air-Cooled 1600+ AGOIA Goodness...

Bookmarks

Bookmarks

Posting Permissions