DFI LANparty DK P45-T2RS/T3RS (Intel P45) - News|Info|Results

[angoholic]

Sry i forgot to mention that , i meant at least an hour Prime Large (or longer) or something like that @air.
That means the UT and DK really stand shoulder to shoulder although the UT should be slicker. My DK does 615@Prime, still testing 625MHz, bootstable at 645MHz maybe even more still on air, Thanks alot

[DoObs]

Thanks C-N...much appreciate the info...ive made my decision on the UT for next year...wish someone could get me one for cheap...:P

The market is really affecting the prices a little.

[Fresh_Thing]

my 24/7 settings

[angoholic]

I think I know those Settings already from another page but don't know where it was Fresh Thing

[Aerou]

my 24/7 settings

can't you go with higher stable memspeed? maybe 333/800?

but you sure have sweet voltages, far below what I would use for 24/7

[Kondom]

Hey i ve crucial 1066 led.. single led slot.. But it was defactive..
So i need new ram's for dfi p45 t2rs plus.. Which ram was best for this mobo ?

[Kondom]

any1 used http://www.newegg.com/Product/Produc...82E16820231209 this ram?

[angoholic]

Will do the job

Finally got FSB640 bootstable and 660MHz 1M stable
Bootup @youtube here

[Kondom]

Great work.. Post Cpuz ss .. And what 's the model of your ram's?

[Sadhana]

Please shared the bios setting for DK P45 T2RS+ with E85. I'm already have this mobo and want to bump my E85 with

[angoholic]

2x1GB 85er Dominator rev1.2 with GMHs, for the stable settings with FSB600 and above i used 667er Ballistix with GMHs Kondom

[OUTSIDE]

How to put +-0.5x multiplier in this mobo? I can only put 6, 7, 8 and 9x (for the Q6600)

I've started today the OC tests... Now, I have 400x8 (3200) without touch anything (with the minimum V at all)

Thx!

[Supershanks]

How to put +-0.5x multiplier in this mobo? I can only put 6, 7, 8 and 9x (for the Q6600)

1/2 multi is cpu dependent. Applies to 45nm cpus. Q6600 doesn't qualify.

[fiveprime]

Still no luck what so ever getting my Q6600 above 3.0ghz, any increases in FSB, changes in multi results in crashes and fails. Is it my mobo? This chip kicked ass in my P5K, please any help will be appreciated.

[OUTSIDE]

Good good!!!!

I've OCed my rig... finally! I've got my first stable OC! Now... I will get the minimum voltages for that configuration... and after that I WANT MORE!

Q6600 G0 2.4GHz @ 3.4GHz with...

CPU: 425x8 -> 3400MHz
MEM: 333/800 -> 1021MHz
Voltages (I put the data that I put and the data that BIOS shows):

CPU -> +187.5mV (1.44V)
V DRAM -> 2.1V (2.08V)
SB -> 1.55V
NB -> 1.4325V (1.39V)
VTT -> 1.254V (1.23V)

The RIG:

Tacens Valeo Smart 560W
DFI LanParty DK P45-T2RS PLUS
Q6600 G0 /w Zalman CNPS-9700LED /w ArcticSilver 5
I've putt AS5 at the NB and Mosfets (with the original heatsink)
2x2GB DDR2 1066 G.Skill F2-8500CL5D-4GBPI
GeForce 7800GTX 256MB (to have something)

And then... Have I touch any more setting like ClockSkew, Amplitude... or some else?

And... one question: for you... what is the (mortal) limit of V for all the components to have 24/7? Air cooling, with my system.

Thx for all!

ByE!

PS: sorry for my bad english guys!

[OUTSIDE]

I've now like this:

CPU: 425x8 -> 3400MHz
MEM: 333/800 -> 1021MHz
Voltages (I put the data that I put and the data that BIOS shows):

CPU -> +162.5mV (1.42V)
V DRAM -> 1.977V (1.96V)
SB -> 1.55V
NB -> 1.35V (1.32V)
VTT -> 1.210V (1.18V)

Downing the volts!

ByE!

[KanGaXx]

what changes between A2 - A3 chipset version ??

i have the t2rs plus version with A2... A3 clock better ? or its the same / or just luck ?

[OUTSIDE]

what changes between A2 - A3 chipset version ??

i have the t2rs plus version with A2... A3 clock better ? or its the same / or just luck ?

how to know the chipset version?

ByE!

[KanGaXx]

you can see on cpuz unfer motherboard..... someone know differencess ???

[Aerou]

you can see on cpuz unfer motherboard..... someone know differencess ???

should be heat output and max FSB (the A3 version being better a bit)

[ea6gka]

anyone having a INTEL XEON X3220 with one of these DFI's???

[TheGanG]

I need BIOS settings advice for 5.8-5.9 GHz (@Dice), would anyone share his results with me? Not looking for high FSB but need some MHz fun, thanks...

DFi Lan Party DK P45-T2RS Plus
E8600 Q820A627 E4353-001
XIGMATEK Achilles H.D.T. - Ambient 21°C
Kingston Hyperx 1066 MHz Micron D9GKX
WinFast PX 6600 GT TDH VGA
High Power 1200 Watt PSU

First Air Tests

571*6/3427MHz
565*9/5090MHz

http://valid.canardpc.com/show_oc.php?id=478729

[TheGanG]

DFi Lan Party DK P45-T2RS Plus
E8600 Q820A627 E4353-001
Dice Pot -63°C
G Skill PC2-6400 4-4-4-5
EVGA 8800 GTSC VGA
High Power 1200 Watt PSU

D-Ice Tests

610*6/3660MHz
600*9/5400MHz
580*10/5800MHz

http://valid.canardpc.com/show_oc.php?id=481181 5800 MHz

http://valid.canardpc.com/show_oc.php?id=481324 600 FSB

[tamashumi]

@aerie
I had A2 and now A3. In my case A3 is much better and easier to OC but maybe this by rev of the board itself A1 vs A2. Or even my previous A1 board (with A2 chipset) could've been just random bad one.


@thegang
insane ocing, gogo freez it to the rock. I keep my finger crossed



guys, I'm trying here first becouse of the board model. how to run this thing for Wake-On-Lan? I can't see the option in BIOS o_O

[angoholic]

SetFSB with FSB<=600MHz come on... go for 650 or something like that