1366 block q

**masska** · 12-29-2008, 12:42 AM

just finished reading all the comments in this thread.
We are all here to share, learn, and contribute. Some of us are all too familiar, experienced and very well versed in what we do. Some of us are not and are on a journey to learn and expand on our knowledge.
"Share your knowledge. It’s a way to immortality".(Dalai Lama)
We all have the right to comment and add our opinions. Common sense, respect and courtesy should always be remembered though.

happy new year to all.

**gillbot** · 12-29-2008, 04:10 PM

Originally Posted by @@@@

20 post flame thread

seems typical for LC especially lately. a handful come in and flame and the thread turns into a pissing match.

**Utnorris** · 12-29-2008, 07:35 PM

Is Swiftech the only one with a back plate for the 1366 motherboards? I didn't see any other ones, even on the Koolance.

**dengyong** · 12-29-2008, 08:03 PM

Originally Posted by Utnorris

Is Swiftech the only one with a back plate for the 1366 motherboards? I didn't see any other ones, even on the Koolance.

I thought the Koolance 350 comes with one.

**The-Fox** · 12-30-2008, 01:25 AM

Swiftech is probably the only one with a decent backplate.
Aside from that, there are a few blocks with support for socket 1366: EK Supreme, Aqua Computer blocks, Koolance 350.

**Utnorris** · 12-30-2008, 05:58 AM

I know a few have the hold down plate, but other tha the Swiftech, I didn't see any that offered the back plate.

**Hondacity** · 12-30-2008, 07:08 AM

koolance 350 comes with a backplate

**dengyong** · 12-30-2008, 01:45 PM

Originally Posted by Hondacity

koolance 350 comes with a backplate

I thought I had seen a picture of it recently.

**NaeKuh** · 12-30-2008, 01:47 PM

Originally Posted by dengyong

I thought I had seen a picture of it recently.

Here is the entire package..

the rubber with the hole is used for i7... the non hole, everything else..

i like gabe's backplate tho.. :X

**dengyong** · 12-30-2008, 02:15 PM

That's the one. ^

**NaeKuh** · 12-30-2008, 11:46 PM

Guys i need to appologize.

My test result was botched.

I just found out i did an improper mount for the 350. I THOUGHT the block was flat. So i didnt put a lot of mounting pressure on it. Its kinda pointless i feel on a flat block.
But i just found out that its BOWED.

So i need to retest the block all over again.

**Lu(ky** · 12-31-2008, 02:07 AM

Originally Posted by NaeKuh

Guys i need to appologize.

My test result was botched.

I just found out i did an improper mount for the 350. I THOUGHT the block was flat. So i didnt put a lot of mounting pressure on it. Its kinda pointless i feel on a flat block.
But i just found out that its BOWED.

So i need to retest the block all over again.

Hey at least you are honest and it shows you are NOT a fanboy.

**azza21** · 12-31-2008, 06:12 AM

So at this moment in time no one really knows what is the best 1366 block out there...Also will d-tek me bringing out a backplate for its v2?

**gillbot** · 12-31-2008, 07:53 AM

Originally Posted by Lu(ky

Hey at least you are honest and it shows you are NOT a fanboy.

Nah, he's a n00b for not checking it.

**Splave** · 12-31-2008, 08:43 AM

Originally Posted by azza21

So at this moment in time no one really knows what is the best 1366 block out there...Also will d-tek me bringing out a backplate for its v2?

Not this year

**warriorpoet** · 12-31-2008, 08:45 AM

Originally Posted by azza21

So at this moment in time no one really knows what is the best 1366 block out there...Also will d-tek me bringing out a backplate for its v2?

Will D-Tek ever answer my email? All signs point to no.

**NaeKuh** · 12-31-2008, 09:33 AM

Originally Posted by gillbot

Nah, he's a n00b for not checking it.

:X

yeah u and skinnee was laugh at me yesterday as i was hitting my head on the wall after dean told me it was bowed..

i dont think even skinnee knew it was bowed until i told him yesterday also..

**skinnee** · 12-31-2008, 10:21 AM

No...I didn't know the thing was bowed, but your message to me was more than enough of a reason to laugh at you.

**gillbot** · 12-31-2008, 10:22 AM

Originally Posted by NaeKuh

:X

yeah u and skinnee was laugh at me yesterday as i was hitting my head on the wall after dean told me it was bowed..

i dont think even skinnee knew it was bowed until i told him yesterday also..

First thing I do with every block/heatsink I get is check the base.

**NaeKuh** · 12-31-2008, 01:47 PM

remounted with pressure.. (KL-350)

thats all i need to say.. i cant get even cores (only first mount), but look at my LINPACK max temps..

Ambients taken at 25-26C. Via temp probe at the front intake of my rad.

Coolant was recorded at 26.7-27C it was dancing in between those numbers...

im not gonna edit anything anymore since you guys want to see unedited stuff..
i'll post my supreme retest results when i get them, most likely next year,
but dude, i was getting those temps on prime95 on the supreme..

OCCT temps, @ same ambients 25-26C, coolant temp was lower.. like 26.3-26.8C

Load was held for 10min to achieve max delta... add 1C to those numbers... when i took the pic, the temps fell 1c below max.

**headala** · 12-31-2008, 07:46 PM

Thanks, Naekuh, for the results; do you have any other blocks results (please)?

**warriorpoet** · 12-31-2008, 07:49 PM

Sweet mother of poopysauce! Those temps are bananas.

**T_Flight** · 12-31-2008, 10:32 PM

Dang, with temps like that IntelBurnTest is pointless.

Hang on a second...did I just say that? I never thought I'd say something like that.

The CPU isn't even warm. That's unbelieveable! I mean I believe Naekuh, but that's incredible.

Man if I can get temps like that I'm gonna do Jumping Jacks and back Flips.

**NaeKuh** · 12-31-2008, 10:33 PM

EK results will come next year.. promise..

today i get drunk.. tomorrow i stay in bed with hangover...

the next day i throw the supreme back on.

**T_Flight** · 12-31-2008, 10:40 PM

Is that with a single DDC or the dual DDC setup? Iwaki? Please, do tell speciffics. You have about the same ambient I do in my room right now.

Thread: 1366 block q

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions