Quote Originally Posted by Hot'n'Chilly View Post
3.4ghz now (tested stable on Prime for a few minutes just a bit ago).

CPU Ratio: 17
BCLK: 200
DRAM: 1203mhz
UCLK (UnCore): 3008mhz
QPI: 7218 MTs

CPU Voltage: 1.2375v
PLL Voltage: 1.9c
QPI (unCore) Voltage: 1.3625v
DRAM Voltage: 1.62v

I tried the 18x CPU Multi Ratio but it would blue screen out of Prime95, so I had to go back. I suppose I'm stuck here until I think of a way to crank something up without crashing. Any ideas?
Raise your CPU voltage..... 1.2375V is not enough for your chip @ 3.6GHz. What kind of cooling do you have / how are temps?

You should really run either LinX in 64-bit mode for a few hours or Prime95 for 12hrs+ to declare a system stable. Running Prime95 for a few minutes is useless in determining stability in my experience. Prime will run stable for 30 minutes yet LinX will produce BSOD in a minute or so.

Not related to you but the voltage scaling on these CPUs (at least mine) really sucks...... I can get 3.8GHz 8-hr LinX stable at 1.264V as I posted earlier today, yet LinX produces BSOD within minutes when running 4GHz @ 1.36 volts. This 920 will simply not do 4GHz whatsoever.