**Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

[SAB]

How could it be overdrive not saving the voltages? I'll wait to see if it is/isn't od then I'll report it. Thanks for the reply

What I meant was report that the bios wont use all 3 cores.
And here is a thread I ran across while reporting that the 12/01/08 Official and the 12/18/08 Beta only used 2 cores on my UT 790FX with X3 Phenom.
I tried the newest AMD overdrive and I found that my volts didnt change as well.
Most of us overclockers hate overdrive cause its so unstable,best to stick with bios to OC.

[Oese]

new beta solves this problem:

http://csd.dficlub.org/forum/showpos...73&postcount=7

[SAB]

Lets hope this post is true and Oskar is indeed working on it in his spare time
http://www.csd.dficlub.org/forum/sho...7&postcount=12

[PepsiLove]

What I meant was report that the bios wont use all 3 cores.
And here is a thread I ran across while reporting that the 12/01/08 Official and the 12/18/08 Beta only used 2 cores on my UT 790FX with X3 Phenom.
I tried the newest AMD overdrive and I found that my volts didnt change as well.
Most of us overclockers hate overdrive cause its so unstable,best to stick with bios to OC.

Ah thank you =), that worked great . Finnaly at 3.2ghz stable

[SAB]

did u uninstall it?
And can u post your OC settings as we both have same cpu.

[PepsiLove]

did u uninstall it?
And can u post your OC settings as we both have same cpu.

Yup, uninstalled it. I will, but atm I'm at work, I'll post when I get home at 10pm nz time.

[kaka_vn]

help please - now i'm testing Phenom II 940 with 790FXB-M2RS
but i can't set Multiplier > x25 T_T
any new bios for this mobo ??

[saveus222]

isnt the max multiplier 25 ??

[demonkevy666]

isnt the max multiplier 25 ??

Phenom II have higher multipliers some boards limit the max multiplier

My 9850 only go's up to 25 in bios but AOD go's up higher

try using Amd Over Drive for higher.

[Brother Esau]

"NEW" D.F.I UT 790FX-M2R Alpha Bios 12/26/2008 >>>>>>>>>>>>>>>Alpah/Beta anyway a bios that enables all three cores on a Triple Core
Cpu on the LP UT 790FX-T2R motherboard. 12_26_2008 mm/dd/yy date
code.

Should be flashed only with Floppy disk, Usb stick or by CD.

[=[PULSAR]=]

Has anyone tested this board recently for 3-way crossfire?

[Brother Esau]

Has anyone tested this board recently for 3-way crossfire?

Out of curiosity.............why do you ask?

[=[PULSAR]=]

Plan on getting back into F@H and want to throw 3x3870's in with a 9950 probably . Already have the MB and 2x3870's sitting around. Last I heard on this board, it doesn't support SLI any changes that I haven't heard about?

[Brother Esau]

It runs TRI XFIRE fine no Nvidia SLI though,,,,,,,,,,,,,,,,bleh

[=[PULSAR]=]

does it look like it will be capable of running Phenom II?

[BulldogPO]

Any way to flash these DFI bioses to Sapphire´s board as they are same.

[Oese]

does it look like it will be capable of running Phenom II?

it will..

and triple cf shouldnt be a problem..

[SAB]

"NEW" D.F.I UT 790FX-M2R Alpha Bios 12/26/2008 >>>>>>>>>>>>>>>Alpah/Beta anyway a bios that enables all three cores on a Triple Core
Cpu on the LP UT 790FX-T2R motherboard. 12_26_2008 mm/dd/yy date
code.

Should be flashed only with Floppy disk, Usb stick or by CD.

Working Good So far
Back to driving my 3 cylinder.
Gonna Overclock it after I make sure all is well.

[Brother Esau]

I was Hoping Oskar would see my post in here a couple of pages back and get this resolved personally. I guess I got my wish



P.S...........Olli ....get friends from Germany to test ALPHA 12/26/2008 Bios and report results at DFI Club please. SAB please do the same.


Campbell

[SAB]

Yup it has been 1 bad bios after another.
Lets Hope 2009 is a better year for us.
I have a question about k-10 and half dividers.
Is memory bandwidth hurt,when running half multi.

[Brother Esau]

Yup it has been 1 bad bios after another.
Lets Hope 2009 is a better year for us.
I have a question about k-10 and half dividers.
Is memory bandwidth hurt,when running half multi.

Yea whole Year of Bad AMD Bios from D.F.I ....WTF....is up with that?

This Message is for Oskar Wu

Really Oskar you gotta do something about this its quite appalling and very Disappointing to say the least. I know D.F.I inc Financial mainstay currently resides in Intel Boards and that's fine in a Business perspective considering where AMD has been in the Past couple of years but 20 different ty Bios for this board in the Past year that's absolutely ridiculous! I Know you guys know how much time I have put into testing these past years Bios even offering Free Re-Programming for Beta Testers in the Event of Bad Flash/ start giving us something solid to work with and stop wasting my time and everyone elses with this drivel .

No disrespect intended towards you in the slightest Oskar with what I just said but think about it, time is the one thing you cannot get back in life. I have no problem doing testing but the reason I stopped is because well the Bios coming out for this board were a complete waste of time .


Now on with the "New" >> Oskar I speak with the heart I hope you can see that? Please now that we have great Processors coming from AMD once more can we please kick the Bios Quality up to the Standards that made D.F.I Legendary with The Expert , Venus, SLI-DR and we can Re- Crown D.F.I with the Best AMD Oveclocking Platform Once More?

We want You Programming these Bios not your Protege's!

Thank you Oskar............Campbell

[Oese]

I was Hoping Oskar would see my post in here a couple of pages back and get this resolved personally. I guess I got my wish



P.S...........Olli ....get friends from Germany to test ALPHA 12/26/2008 Bios and report results at DFI Club please. SAB please do the same.


Campbell

will see.. i think it is indeed tested by one member that says all cores run well and hes now testing overclocking.. could flash myself and see if it works for x4 also..

[Oese]

will see.. i think it is indeed tested by one member that says all cores run well and hes now testing overclocking.. could flash myself and see if it works for x4 also..

ok have flashed it and it works so far.. i'll test further..

[OggeOJ]

Does the NB get very hot when you overclock the board, or can you stick with the stock cooling on it?

[Oese]

you can stick with it..