[OCTH] G.Skill F3-12800CL8T-6GBPI-B

[jugeen]

Hey guys, I did a short test of my new G.Skill F3-12800CL8T-6GBPI-B kit. Don't care about Pi times. Test was about to stability.

Test environment:

DFI LanParty UT X58-T3eH8
Intel Core i7 965XE
Thermalright TRUE Copper
G.Skill F3-12800CL8T-6GBPI-B
Zotac GeForce 8400 GS
CSX SLC 30GB SSD
Silverstone Decathlon 1200W
Windows Vista Ultimate SP1 64 bit
HyperPi 0.98b

ddr3-1850 8-9-8-21-1T @ ~1.66v



ddr3-2000 9-9-8-21-1T @ ~1.66v



ddr3-2000 8-9-8-21-1T @ ~1.84v



And at last some photos about the kit:





We all know there will be better Tri-Channel kits on the market but till that time this kit is not that bad

[Dami3n]

Thanks for the mini-review jugeen. Nice numbers.
Im waiting for this memory kit to mount my 920 in the DFI.

Did you try 900 with the stock timings?

[Dsjjang]

Nice kit, bro~
I will post my kit at tomorrow~

[jugeen]

Nice kit, bro~
I will post my kit at tomorrow~

thx! waiting for your results!

Thanks for the mini-review jugeen. Nice numbers.
Im waiting for this memory kit to mount my 920 in the DFI.

Did you try 900 with the stock timings?

[B][I]thx!

here you go ddr3-1800 8-8-8-21-1T @ ~1.63v

[eva2000]

nice.. this board loves ram

Got a 1000mhz 8-8-8-21 run to compare with the others ?

[jugeen]

nice.. this board loves ram

Got a 1000mhz 8-8-8-21 run to compare with the others ?

not yet, but i will

[Nosfer@tu]

Great Job jurgeen my freind

Thx for sharing with us

[M.Beier]

Looks good Gabor, is the PCB as thin as it looks? A bit shocking to me...
And thanks ffor your greetings, had a short but nice night (Went to Dina & Bala's class reunion)

[Oliver]

thx for posting my friend, glad to see you got the dfi and your kit

it looks promising, they are for sure HCF0s huh

keep pushing it

[TheKarmakazi]

nice results! what are the max cas 9 clocks?

[Dami3n]

here you go ddr3-1800 8-8-8-21-1T @ ~1.63v

Great!
Thanks jugeen

[Dsjjang]

My kit arrived today~







32M PI passed DDR3 2000 8-8-7-20 1T with 1.75v~
Sub timming all auto and Vista 64Bit~

But R2E is so crappy at high mem clock, yet~

[WaterFlex]

Nice sticks

[jugeen]

max valid 1095.8 MHz @ 9-9-8-21

... and a little more

[TheKarmakazi]

max valid 1095.8 MHz @ 9-9-8-21

... and a little more

Nice

[jugeen]

ddr3-2050 9-9-8-21-1T @ ~1.71v

[trueplaya4ever8]

Damn this is some nice ram! Not too expensive either..

This stuff right?

http://www.newegg.com/Product/Produc...82E16820231238

Show me moar!!

[The-Fox]

Actually you guys should check the OCZ DDR3 Platinum 1333Mhz @ 7-7-7.
I own the 3GB model and at 7-7-7-18 1T, 1.64v I was able to run them at 1650Mhz.
Going up to 8-8-8-18 1T, 1.64v I was able to run them on 1850Mhz, I stopped there as it seems my mem controller (uncore) doesn't like high speed ram
I think this babies can run at 2000Mhz 9-9-9 or even less at stock voltages.

With some voltage increase they can probably do the 2000Mhz@7-8-7 magic numbers

[Dsjjang]

PI Black PC3 12800 is very good mem among HCF0~

[Dami3n]

My kit sucks. I flashed my dfi with 01/06 beta and im trying to load windows at 1800 8-8-8-21 1,65v with 150x12, with vtt at 1,5v, an nothing. Bad luck

EDIT-Playing with ram slots 1800 FTW,

[The-Fox]

Very nice sticks, I am about to get this kit for a review this week.
One question though: do they stop scale up with voltage at about 1.8v or you guys are too shy ?
Can someone try 2.0v ?

Thanks !

[Dami3n]

Jugeen, what settings are you using to boot at 2000 cl9 1,66v?

[The-Fox]

A nice set of ram I must say.
2100 Mhz @ 9-9-9-24 1.8v seems to be the limit for benches like Super Pi/PiFast.

Not too bad:

[jugeen]

Jugeen, what settings are you using to boot at 2000 cl9 1,66v?

i didn't use different settings for boot. settings you can see above were my boot settings.

[Dami3n]

I tested my kit with 1,35-1,5 vtt, 166x20 and dram x12, with 200x16 and dram 10x, and nothing, i can load windows at 1900 9-9-9-24 but not at 2000 9-9-9-24 1,66v.
Not bad, but i expected more from them.