High voltage benching time
My fastest sub 4Ghz 32M time @999.3Mhz 8-8-7-21 at 2.025v bios set vdimm
Same vdimm 2.0.25v bios @1014Mhz 8-8-8-21
3x1GB Micron D9GTR @DDR3-2076Mhz 8-8-8-21
High voltage benching time
My fastest sub 4Ghz 32M time @999.3Mhz 8-8-7-21 at 2.025v bios set vdimm
Same vdimm 2.0.25v bios @1014Mhz 8-8-8-21
---
New PB for 8-8-8-21 frequency @1026Mhz at 2.07v bios set vdimm. Compared to 920 @4410Mhz with 2x1GB Samsung HCF0 based memory @1050Mhz 9-9-9-24 at 1.875v bios set vdimm.
Finally, max Everest benched @1038Mhz 8-8-8-21 at 2.085v
System specs
- Intel Core i7 920 3836A756
- Thermalright Ultra 120 Extreme + LGA1366 Bolt Thru kit
- DFI LP UT X58-T3EH8 R.A51
- HIS HD4870x2 stock hsf
- 2x1GB Cellshock PC3-14400 8-7-6-21 1.9v + 1GB OCZ PC3-14400 Platinum 8-8-8-24 (3x1GB Micron D9GTR)
- 750GB Samsung HD753LJ
- Pioneer DVD-RW
- 1KW Corsair HX1000 psu
- WinXP Pro SP3 nLite fully updated
---
Eva2000 + Micron memory + DFI motherboards = ownage, as usual.
Awesome scores
and Nice Sticks you've got
nice eva2000...interesting test with a brand-mixed D9 memory modules....I supposed i'll do same after my winter vacation
Cool !
no signature at the moment....
in progress...
Nice, I just wonder how long it can survive at this voltage.. I guess its not 24/7..
benching volts only
thanks guys, next up 3xGB G.Skill PC3-12800HZ Micron D9JNM from 2 kits of 2x1GB
---
nice work Eva! Good to see the DFI board looks strong! Do you have any HCF0 chips to test cas8/cas9 max?
my initial test at http://i4memory.com/showthread.php?t=12855 are with 2x1gb corsair ddr3-2133c9df samsung hcf0, haven't got a proper triple channel hcf0 to test.
3x1GB D9JNM aren't performing that well in tri channel so far compared to mixed D9GTR as they can't do DDR3-1600 8-8-8-24 at 1.65v like D9GTR can. Also these D9JNM default SPD is very very tight for tRFC i.e. almost 1300+ MB/s more bandwidth at DDR3-1600mhz 8-8-8-24 in memtest86+ at same clocks a D9GTR (which had loose SPD). More testing heh
Last edited by eva2000; 12-30-2008 at 10:18 AM.
---
great work my friend, looks like u got it huh
keep pushing it
Hey Eva,
If you get the time and the G.Skill HZ's start clocking for you.
Can you tell me if running them in tri holds them back next to dual.
I'm using the same HZ dual channel kit, and am thinking about picking up another to run tri like you above.
Running dual channel on a UD5, they will SPI32M @ 1043Mhz 8-7-7-20 1T.
thanks.. i just pulled off 920 @4610Mhz air cooled 32M pi 7m 54sOriginally Posted by Oliver
- screenies coming soon gotta run other benches
well the thing is HZ in dual channel on X48 run DDR3-1800 8-8-8-24 fine too so could be just not liking tri - maybe next DFI bios will help ?
---
Very nice mate, good for GTR for sure. That DFI board seems to be going quite well.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
thanks, updated to 12/31 beta bios so will recheck this
---
We are drooling over your results. Care to share that 12/31 bios?
tripgood
Big hardware pile
Oops, found it in one of your other posts. Many thanks!
tripgood
Big hardware pile
Reply With Quote
Bookmarks