Biostar X58 Core I7 920 @ 4545MHz (my first try on air)

[PcCI2iminal]

nice 920 chip u have man
waiting for ln2 test?

thx man
i need to wait one more day

Nice board my friend, have fun

thx Bart
and yes,its a nice board ,the new Biostar dynasty just began

figured out how to view them on the page click 'Show Adv Links' and click the image link to

a single click on the thumbs like before was better hehehehe

What batch is your 920 ? My 920 3836A756 doing similar on TRUE120 air

nice 920 and of course nice DFI ^^
max bclock?
EDIT
18x219.6Bclk - 19x219.6Bclk

for 32m
great



my 920 ->batch 3838A548

[eva2000]

nice 920 and of course nice DFI ^^
max bclock?

my 920 ->batch 3838A548

So 2 weeks newer heh

Yeah so far at 220bclk bios = 219.6 real heh

19x219.6Bclk

[PcCI2iminal]

very impressive George

and great RAM clock



I can not reach that speed ....not now ....cz only two ram dividers(2:8 max) are available on Biostar X58 :S
I was talkin with Thomas about it and he said the same ,only two dividers is available for him but his 920 is an ES and its locked , my 920 has all dividers unlocked(tested on R2) ,bios issue maybe i dunno
I will report it and i hope they can fix soon

[PcCI2iminal]

Time for some changes and still on air

CORE I7 940 ES C0

Boot @ 220




222 good for Pi1m




Core I7 940ES
Biostar Tpower X58
3 x 1gb Adata 1600MHz
HD4870X2 (840/1000MHz)
Thermalright Ultra 120 Extreme 1366 + San Ace 102CFM
Room Temp @ 15c

(12-10-2008 bios)
Intel SpeedStep Tech - Disabled
Ratio CMOS Setting - 12
CPU Frequency Setting - 220
QPI Link Speed - Full Speed
DRAM Frequency - 1320MHz
Command Rate - 1T

>Intel PPM/Turbo Mode Configuration
Intel SpeedStep - Disabled
Intel C-State tech - enable
C State package limiting seting - Auto
C1 Auto Demotion - Enable
C3 Auto Demotion - Enable

>DRAM Timing Configuration
Ch A/B/C DRAM Misc Timing - SPD
DRAM Timing Control - manual(8-8-8-19)

>Clock Gen Configuration
PCIE Clock by - Auto
PCIE Frequency Setting - (100)
CPU Clock delay - No delay
MHC Clock delay - No delay

>All Voltage Configuration
CPU Vcore - +0.020v
CPU VTT - 1.55v
CPU PLL - 1.8v
DRAM Voltage - 1.65v
NB VCC - 1.210v
SB VCC - Auto
QPI/PCIE PLL - 1.28v

[Computerville]

Really awesome! I will get my i7 system tomorrow.