I got my my Official response from G. Skill earlier today. It seems all of these DDR3-2000 CL9 to the upcoming CL7 Ram kits will need to be ran with QPI/DRAM vtt at 1.55 - 1.65v.

The G. Skill Black Pi DDR3-2000 will run at 9-9-9-24 1N with 1.55v on the QPI/DRAM vtt.


Dear customer



All DDR3 2000 module requires QPI Voltage 1.55v to run.

You need to have good air flow on NB chipset. 1.35v is way to low though it is the recommend the safe voltage.

As long as NB chipset temp is not too hot, it is ok.



Thank you

GSKILL SUPPORT