G.SKILL F2-9600CL5D-4GBPI Sample testing

[WaterFlex]

Thanks for the info. I guess if I was not looking to OC hard, then the $105 price would be ok for some 1100mhz ram?

4Gb. Sure it is ok.

[chevell]

These needed 2.150 volts to get prime 95 blend stable for 12+ hours at stock clocks 1200Mhz 5 5 5 15, there was just no way around this for me.

But my system has never been so stable. The cheap ram just wasn't cutting it anymore. Happy with purchase.

[zsamz_]

These needed 2.150 volts to get prime 95 blend stable for 12+ hours at stock clocks 1200Mhz 5 5 5 15, there was just no way around this for me.

But my system has never been so stable. The cheap ram just wasn't cutting it anymore. Happy with purchase.

try running cas4 1000mhz+ better on 780i

[Highgertz]

Hello again to you. Dry ice, 2.6v 1509 MHz 6-9-9-25 EP45-UD3. Acceleration I do not like.

At 1440Mhz 5-5-5-15 2.4v -50-56*С booted windows and super pi 1m, also at 1450.

To be continued

[Roger_D25]

Great work man, that is certainly the highest clocks I've seen with these modules (not bad for a 2 x 2GB kit)! What did you use to cool the modules, I realize you used Dry Ice but what did you use for a container (any pictures of the setup)? In anycase that is pretty amazing Highgertz, keep pushing it!

[Highgertz]

Roger_D25
Invented ghetto-glass juice RICH, soon prepare photo.
New WR
1545MHz 5-5-5-15 2.6v


http://valid.canardpc.com/show_oc.php?id=468849

[chevell]

try running cas4 1000mhz+ better on 780i

I was at 1000Mhz cas4 with my last Ram. My benches were a decent amount better at 1200mhz 5 5 5 15 not to mention my system is more stable now. I wrote up a page about the gains from this Ram here. http://www.evga.com/forums/tm.asp?m=...55874;�

Here is something you don't see around here to often...a realisitic and usable overclock that won't degrade in two months time. it was 75F when I ran this test on air.

[Highgertz]

The first experimental model, prototype

[Roger_D25]

And I thought you were just joking around with me regarding the "ghetto-glass juice RICH", very impressive to say the least! It must be working pretty darn good given your insane clocks on these modules, let us know when the RAM cooler will be available in retail channels! Keep pushing it man!

[Mtrx]

Got one of these kit for christmas

[Mtrx]

This config don´t brings the best bandwidth but looks like the sweet spot to me.

[zsamz_]

This config don´t brings the best bandwidth but looks like the sweet spot to me.

you should be doin 500fsb+ to see the real sweetspot

[Jor3lBR]

Anyone know anything about this new Revision:

[andressergio]

Anyone know anything about this new Revision:

Hey mate this are the ones i have...

i'm runing them 1267 PL8 / AI twister Lighter / 2,09vdimm / NB 1,45 on my Maximus 2 Formula / Q9650 4038 (475x8,5)

I can do stable on the P45 till 1200 PL7 on 2,05 vdimm on x9 multi

they're awesome i have to test more


Cheers
Sergio

[NapalmV5]

i got the same ^

better/worse than the rev before ?

[Mtrx]

I don´t know, in case someone is wondering this are the same has guess2098 showed in his first post

[zsamz_]

I don´t know, in case someone is wondering this are the same has guess2098 showed in his first post

nope its not the same version as guess2098

[Mtrx]

Sorry, i meant the ones i have

[andressergio]

Hey guys

Is it possible to run this mems on more than 2,1 for 24/7 ? say 2,15 or 2,2 ?

Sergio

[zsamz_]

Hey guys

Is it possible to run this mems on more than 2,1 for 24/7 ? say 2,15 or 2,2 ?

Sergio

why? cant you do 1300 with less than 2.1v? mine do it @ 2.06v
it should be ok but dont go over 2.15v real not worth it
if they were cheap thats another story lol
the most i've used so far is 2.09v to do 1333mhz

[andressergio]

why? cant you do 1300 with less than 2.1v? mine do it @ 2.06v
it should be ok but dont go over 2.15v real not worth it
if they were cheap thats another story lol
the most i've used so far is 2.09v to do 1333mhz

too hard zsamz for the P45 and the quad...i can do 1267 on CL5 PL8 yes on x9 multi, and 1200 PL7 on 2 - 2,05 and NB 1,41 - 1,45, can't do PL6

for 1200 5-5-4-15 PL8 i managed to pass 9 LinX pass normal test failed on 10 so they need more volts on the P45

quad + 2x2GB too hard for the chipset, much easier on duals

inmo

Or maybe i will have to loose timmings, i'm just runing them 5-5-5-15 the rest auto

Thanks zsamz any tip i appreciatte

Sergio

[zsamz_]

too hard zsamz for the P45 and the quad...i can do 1267 on CL5 PL8 yes on x9 multi, and 1200 PL7 on 2 - 2,05 and NB 1,41 - 1,45, can't do PL6

for 1200 5-5-4-15 PL8 i managed to pass 9 LinX pass normal test failed on 10 so they need more volts on the P45

quad + 2x2GB too hard for the chipset, much easier on duals

inmo

Or maybe i will have to loose timmings, i'm just runing them 5-5-5-15 the rest auto

Thanks zsamz any tip i appreciatte

Sergio

well i have a dfi board but no p45
if i set on verry aggressive in memory pulls i wont pass memtest so i set to aggressive n i 'm good
i suggest you chek real volts with multimeter
n dont be afraid to push 1.45v on nb i'm pushing 1.55v on p35
it might be you quad stressing nb too so might be harder
when i go p45 it will be dfi again i dont like the performance of all the other p45 boards
for 1300mhz i set timings @ 5-5-5--15-5-56 pl8 2.06v
i dont have skews they different on my board then on p45

[andressergio]

well i have a dfi board but no p45
if i set on verry aggressive in memory pulls i wont pass memtest so i set to aggressive n i 'm good
i suggest you chek real volts with multimeter
n dont be afraid to push 1.45v on nb i'm pushing 1.55v on p35
it might be you quad stressing nb too so might be harder
when i go p45 it will be dfi again i dont like the performance of all the other p45 boards
for 1300mhz i set timings @ 5-5-5--15-5-56 pl8 2.06v
i dont have skews they different on my board then on p45

thanks zsamz yes the quad is putting lots of stress specially at 8,5 multi, as i have issues on x9 multi and not on 8,5 i'm there...

will keep trying but yes this mems go up fine till 1300, i want them for 24/7, 1200 CL5 on PL8 at 480x8,5 gives me good bandwith

Cheers
Sergio

[NapalmV5]

to make you guys feel better.. im running mine @ 2.5v

no problemo.. doesnt even get warm

awesome ddr2 kit

[zsamz_]

to make you guys feel better.. im running mine @ 2.5v

no problemo.. doesnt even get warm

awesome ddr2 kit

what speed you @