Quote Originally Posted by OcAddict View Post
...
No LED all fans spinning,
If the Board powers on with all fans spinning and all LEDs running but the DEBUG display doesnt display any POST codes and nothing else happens, then the PWM probably cant get enough juice. Check if the 8Pin 12V plug and the 24Pin ATX PSU power plugs are plugged in properly, make sure they dont bend too much or haven a lose cable. Check another PSU if possible. If nothing helps, power off the mainboard, remove both BIOS chips and wait a few minutes, then put them back in and power the mainboard on again. Make sure the BIOS chips are seated the right way around, the marks on the chips should face downwards. Let us know if or THX
Yep surely worth a try.