Hi guys, this is my first post here at XS. More than 400 posts at ASUS Rampage Formula forum and not a single post here.

I hope to see a mod BIOS with the lower CPU GTL Reference Voltage settings in the future made by Mikeyakame. I'm still wondering if a CPU GTL Reference Voltage setting of 0.60X can get my Q9450 stable at an FSB above 465MHz with higher FSB termination Voltage that i need for the NB GTL Reference Voltage and without raising the CPU GTL Reference Voltage. I can get my Q9450 IntelBurnTest stable at 8 X 465MHz with CPU GTL Reference Voltage 0.63X, NB GTL Reference Voltage 0.67X and FSB Termination Voltage 1.16V. I need a FSB Termination Voltage of 1.22V to get the NB stable at 8 X 465MHz. This can only be done with the latest BIOS 0701. The BIOS releases before did not allow me to run it stable at FSB 465MHz. The highest i've got stable was 460MHz. The problem was that i couldn't raise the CPU GTL Reference Voltage without losing stability on the CPU. Maybe with a lower CPU GTL Reference Voltage setting i can get it stable above 465MHz.

I've contacted ASUS and asked them why they removed the lower CPU GTL Reference Voltage settings from the release BIOSes. I never got a straight answer from them.

Is there someone who knows how i can change my nickname here on the forum. I want to change it to Alien Grey. The registation did not allow me to use my nickname. I find this very annoying.

Keep up the good work Mikeyakame.