Quote Originally Posted by nosboost300 View Post
cpu multi 20
qpi multi 26
uncore multi 16 (or even auto.. i've had it running 4000mhz just fine)
memory multi 8x (to get rid of that as a limiting factor)
cpu voltage 1.55 (also to eliminate that as a factor)
qpi/vtt v 1.55
cpu pll 1.9
ioh core (or whatever uncore voltage was) 1.45
tried with load line calibration on and off
clock skew's upped 50ps

WILL NOT RUN 200 BCLOCK... and i'm pissed... i was hoping to hit 26k 3dmark06 before shipping off these 260's i just sold.. but looks like that ain't gonna happen!
That qpi mult, is that a typo? should it be 36x?

Ok, try this..

uncore multi - 15x
mem multi - 6x

I know.. you don't want to lower it.. just try it first and see if you can get that stable!!

You can probably lower Vcore to like 1.45 or so. and you can turn on turbo

I had the same problem you did and those adjustments allowed me to stabilize at 200 Bclk.