Hey what is the 'safe' temperatures for i7?
Hey what is the 'safe' temperatures for i7?
ES chips run hotter than retail chips too, please don't forget to mention this. Any temps you see here, can not be duplicated by retail chips.
Thanks for that.
What are the retail chips normally hitting with a moderate OC? I think most people's were ES's.
okey i figured out the perfect mount....
You apply tim in a diagonal line from one corner to the other. Not all the way.
Clamp the block and TWIST it a full 360.
So far 5 remounts and all remounts reported all even temps across all 4 cores. Also im using this wash direction.. Inlet on the left, outlet on the right. Allign your sqaure pin matrix so its alligned with your cpu.
Im really loving this block...
I'll see if i throw on the EK later on... however my HD4870X2 just decided to die... I ordered a new Saphire HD4870X2, so i guess ima break xfire again...
I decided to ditch my SAS controller entirely and go second HD4870X2
Last edited by NaeKuh; 12-17-2008 at 06:45 PM.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?*
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
Buy some clamps
Originally Posted by gillbot
Oh the irony!
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
I'm getting 61C at 100% load at 3733mhz on air with a TRUE and 87CFM fan..no these suckers RUN HOT... i kid not...
Anyhow Final 10 min temps...
wasnt gonna go anywhere else..
Ambients recorded at 25.6
Coolant Temp recorded @ 26.5 - 26.7
I think my chip also runs very HOT...
im really loving the flat out temps...
Im getting closer to 4 also. :P
Trademark PissedVille Secret...
Those are constant numbers since I first set it up.
You have one HOT chip my friend!
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
oh i know it....You have one HOT chip my friend!
i always end up getting the HOTEST date..
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
The huge variation in load temperatures for the Ci7 CPUs is leading me to think that a lot of this may be due to poor calibration. I mean, think of it from the standpoint of a chip designer... what's the point in spending money for an accurate, precise, and properly calibrated part when all it really needs to be is a ballpark 'I'm too hot/I'm doing fine' indicator? Along those lines, one chip could read 10c high and another 5c low.
Thoughts? It's something that almost makes me want to go through Intel's white papers to see if they actually define a tolerance for the CPU's temperature sensors (nevermind that they're, more or less, reading point heat).
I'm doing science and I'm still alive...
You are using an ES chip right? I ask because if you are, then your results don't really mean anything for people who have retail.
Make it Evil's clamps
oh what the hell..
You are using an ES chip right? I ask because if you are, then your results don't really mean anything for people who have retail.
i'll give u guys this much...
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
Pretty stuff T,nice temps on the 350, how are the board blocks working out?
Q6600@ 3.4 Underwater, P5E-VM HDMI, 4GB OCZ 5,5,5,15 EVGA 8800GT, P.C.P.&C 610w
Love them to death.
Makes routing a lot easier, and i dont need to worry about mosfet fans anymore...
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
You should get a set to Martin for comparative flow rate / thermal testing. Same for that 350, I bet he would have the bench ready and waiting before the UPS guy pulled in the drive,,,,,,
Love them to death.
Makes routing a lot easier, and i dont need to worry about mosfet fans anymore...
Q6600@ 3.4 Underwater, P5E-VM HDMI, 4GB OCZ 5,5,5,15 EVGA 8800GT, P.C.P.&C 610w
Martin doesn't test anymore.
that would give martin a reason to fly over to cali, just so he can throw the 350 at me.
WB he's retired...
i was gonna send skinnee one, but i think he's got samples..
need to ask him again..
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
Samples of what?
didnt dean send you a koolance -350?
if he didnt... i'll send you one to borrow to throw on your meters...
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I have one waiting in the wings...just can't run thermals on it presently. I don't have an i7 setup yet, still saving my pennies.
yeah thats what i was thinking...I have one waiting in the wings...just can't run thermals on it presently. I don't have an i7 setup yet, still saving my pennies.
which is why i didnt send you one with the DDC sink i sent ya...
I'll see if i can get thermals against the EK.
Thats the only block i can compare it too right now, and we need a comparision.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I know we need thermals...I should have an i7 setup after the holiday.
2 Questions: do the BP 1/2" compression fittings fit on the 350?
Is it really that much better than a GTZ?
Intel Q9450@3.8GHz|Lian Li PC-A16b|Corsair 1000HX|Asus P5Q Deluxe|Thermalright Ultra120Extreme|Mushkin Redline 4GB|Sapphire 4870x2|
WD Velociraptor 150GB+6400AAKS|HP LP2475W|Logitech Mx518+Steelseries Qck+Logitech CK200
I was just wondering the same thing.
i just tried it...it won't fit on the k350
Posting Permissions
Reply With Quote
Bookmarks