Page 2 of 4 FirstFirst 1234 LastLast
Results 26 to 50 of 96

Thread: [Team.AU]Gigabyte X58-UD5, 3GB Corsair 1866MHz CAS8, Core i7 920 Testing thread

  1. #26
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    Dinos, does the F4F bios have the constant reboot issue?? does it have any vcore issues like others have reported, do you like it more than the F3??

  2. #27
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by GAR View Post
    Dinos, does the F4F bios have the constant reboot issue?? does it have any vcore issues like others have reported, do you like it more than the F3??
    constant reboot issue???
    vcore issues?

    what are they
    please link them
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  3. #28
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    Quote Originally Posted by dinos22 View Post
    constant reboot issue???
    vcore issues?

    what are they
    please link them
    I believe Guacamole was the one having the vcore issues, but i have a rebooting issue when using 200 base clock. Pretty much what happens is, if i shut my system off, 19x200 3.8ghz fully stable, never crashes, never hangs, but if i completely shut the system down, and start up again, i get the two boots, remember back in the days of the ASUS 965 Deluxe board.

  4. #29
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    sounds like its not full stable then or some weird issue with your PSU and board

    i will try this with my setup

    so if i bench with certain settings past say 200MHz bus, shut down, pull the power cord and then turn it back on i should get this sort of issue every time

    we have the same PSUs so it will show for me if it is PSU related
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  5. #30
    Xtreme Addict
    Join Date
    May 2008
    Location
    Land of Koalas and Wombats
    Posts
    1,058
    gar,

    at the bclk you are rebooting, take a look at 3.3v rail reading in bios if its there and make sure its not bouncing around. i threw 2 more hds in my box tonight, and 3.3v began fluctuating heavily for the first time in a while, and yeah basically the whole system became unstable since a lot of input voltages on board use 3.3v supply. i had to switch a few of the modular cables around between connectors and move sata power cables around to fix it. i've had that happen just from setting voltages too high in the past as well, i love my hx1000 but the 3.3v is piss weak and generally reads about 3.18v.

    DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
    Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP


  6. #31
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    that is interesting
    i never had issues with 3.3v with this psu nor HX620 but i did have issues with 900W Seasonic with similar problems GAR is having with X48 board
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  7. #32
    Xtreme Member
    Join Date
    Sep 2006
    Posts
    122
    I got same problems and same psu ,i got one velociraptor, one blu ray burner, mcr355 and 6 fans.
    Board get stuck at 68 69 message before restart.

    Thinking to it it happen exactly the instant the water pump start rotate, will try change cables slots
    Last edited by Ghigo; 12-02-2008 at 02:55 AM.

  8. #33
    Xtreme Member
    Join Date
    Nov 2005
    Location
    Porto, Portugal
    Posts
    265
    Quote Originally Posted by GAR View Post
    I believe Guacamole was the one having the vcore issues, but i have a rebooting issue when using 200 base clock. Pretty much what happens is, if i shut my system off, 19x200 3.8ghz fully stable, never crashes, never hangs, but if i completely shut the system down, and start up again, i get the two boots, remember back in the days of the ASUS 965 Deluxe board.
    I have the same and exact behaivor with my I7 setup. It's not a big issue.

    Windows 7 Ultimate 64bit, SP1 Power By:
    Asus Rampage IV Formula
    Intel SBE 3930K
    Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
    EVGA 570 GTX SLI
    SSD Samsung P830 240GB
    Corsair AX850

  9. #34
    Xtreme Member
    Join Date
    Sep 2006
    Posts
    122
    Johnmike easytune work for you ?

    Well not that matter much to me now that got everest pull every data i need on g15 lcd display
    Last edited by Ghigo; 12-02-2008 at 03:13 AM.

  10. #35
    Xtreme Member
    Join Date
    Nov 2005
    Location
    Porto, Portugal
    Posts
    265
    Quote Originally Posted by Ghigo View Post
    Johnmike easytune work for you ?

    Well not that matter much to me now that got everest pull every data i need on g15 lcd display
    More or less... I could install it, but every time i boot Vista got a Easytune upgrade message. For twice i played with Easytune but once i had a BSOD and i uninstall it and never tryed again.

    I really don't need it, since i use Everest readings and bios for OC.
    Last edited by JohnMike; 12-02-2008 at 04:27 AM.

    Windows 7 Ultimate 64bit, SP1 Power By:
    Asus Rampage IV Formula
    Intel SBE 3930K
    Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
    EVGA 570 GTX SLI
    SSD Samsung P830 240GB
    Corsair AX850

  11. #36
    Xtreme Addict
    Join Date
    Nov 2005
    Location
    Germany
    Posts
    1,160
    Quote Originally Posted by GAR View Post
    I believe Guacamole was the one having the vcore issues, but i have a rebooting issue when using 200 base clock. Pretty much what happens is, if i shut my system off, 19x200 3.8ghz fully stable
    It is your CPU...

    some Core i7 CPUs have problems with the 20 multiplier above 3,8Ghz! I saw it now on some
    i7-920 and 965XE that they wonīt run 20x200 but 19x211 or 190x21.

    My first 920 had the same problem...

    19x200 = stable
    20x200 = reboot
    19x211 = stable

    Edit: btw Bios F4F have problems with multi GPU systems.. If you have SLI or CF then donīt use it!
    Last edited by Chri$ch; 12-02-2008 at 03:33 AM.

  12. #37
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by Chri$ch View Post
    It is your CPU...

    some Core i7 CPUs have problems with the 20 multiplier above 3,8Ghz! I saw it now on some
    i7-920 and 965XE that they wonīt run 20x200 but 19x211 or 190x21.

    My first 920 had the same problem...

    19x200 = stable
    20x200 = reboot
    19x211 = stable

    Edit: btw Bios F4F have problems with multi GPU systems.. If you have SLI or CF then donīt use it!
    wow weird man
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  13. #38
    Xtreme Member
    Join Date
    Nov 2005
    Location
    Porto, Portugal
    Posts
    265
    Quote Originally Posted by Chri$ch View Post
    It is your CPU...

    some Core i7 CPUs have problems with the 20 multiplier above 3,8Ghz! I saw it now on some
    i7-920 and 965XE that they wonīt run 20x200 but 19x211 or 190x21.

    My first 920 had the same problem...

    19x200 = stable
    20x200 = reboot
    19x211 = stable

    Edit: btw Bios F4F have problems with multi GPU systems.. If you have SLI or CF then donīt use it!
    My 920 behaves like:

    20x160 = no need to mix with voltages
    20x180 = stable with manual voltages
    20x190 = stable with manual voltages
    20x200 = not stable
    19x200 = stable, but with dual boot.

    I'm with bios F3. Tryed 280GTX SLi and worked perfected... What a great performance!

    Windows 7 Ultimate 64bit, SP1 Power By:
    Asus Rampage IV Formula
    Intel SBE 3930K
    Gskill RipJaws Z 14900 (1866 DDR3) 16GB 10-11-10-24
    EVGA 570 GTX SLI
    SSD Samsung P830 240GB
    Corsair AX850

  14. #39
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    the FIRST thing i suggest you do guys is flash to F4F bios

    i found that one easiest to use for bus clocking

    report back afterwards
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  15. #40
    Xtreme Member
    Join Date
    Sep 2006
    Posts
    122
    No f4f for extreme still, we on wait for the announced on test, f4g

    About easytune trying get some statistics so far 75% of people on vista 64 cant run it, think only people with old vista upgraded after to sp1 get it running, vista sp1 oem is a sure no go for easytune
    Last edited by Ghigo; 12-02-2008 at 04:25 AM.

  16. #41
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    oh sorry yeah i'm on UD5
    maybe flash to latest beta bios
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  17. #42
    Xtreme Mentor stasio's Avatar
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    3,036
    Just info:
    GA-EX58-Extreme/GA-EX58-UD5 BIOS
    F4g:
    Fix: F12 boot
    Bug: AHCI/IDE
    F4h
    Fix: AHCI/IDE Bug
    F4i:
    In test,nothing negative
    Need a Gigabyte latest BIOS?
    Z370 AORUS Gaming 7,
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 10 x64

  18. #43
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    are you saying they use the same bios
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  19. #44
    Xtreme Mentor stasio's Avatar
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    3,036
    No,of course.
    It's mean in test is UD5-F4i and Extreme-F4i
    Need a Gigabyte latest BIOS?
    Z370 AORUS Gaming 7,
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 10 x64

  20. #45
    Xtreme Guru
    Join Date
    Aug 2005
    Location
    Burbank, CA
    Posts
    3,766
    I am using 19x200, its 100% stable, like i said, once i get into windows i am rock stable. I have 4HD's installed, it might be a PSU problem i guess.

  21. #46
    Xtreme Mentor stasio's Avatar
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    3,036
    GA-EX58-UD5 BIOS F4i
    Need a Gigabyte latest BIOS?
    Z370 AORUS Gaming 7,
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 10 x64

  22. #47
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    what are the changes
    i assume this is the UD5 version??
    i guess i could always check the email if they sent it through with changelog heheh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  23. #48
    Xtreme Mentor stasio's Avatar
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    3,036
    Quote Originally Posted by dinos22 View Post
    what are the changes
    i assume this is the UD5 version??
    i guess i could always check the email if they sent it through with changelog heheh
    UD5 and Extreme,both came out with F4i.Detailed changelog,except posted above I don't have.Check your email and let us know.
    Btw,I got also UD5-F4h BIOS
    Need a Gigabyte latest BIOS?
    Z370 AORUS Gaming 7,
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 10 x64

  24. #49
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    man these CPUs are so hot

    i was trying to make 4.4GHz CPU tests stable on SS last night and i managed a few runs but a lot of them were lockups

    my evap temps go down from -44C to -38C or below when they manage to JUST scrape through

    that's -44C after the 3D tests .......so in game (vantage) drop of almost 15% at with a CPU at 4.4GHz and 1.42v

    that is just downright ing ridiculous beyond ridiculous

    what the hell is going on here. Is Intel going back to those old Pentium nuclear plant reactors or something


    i was planning to test 4870X2 in Crossfire but it turned out that one card was dead. I didnt even realise as i havent even tested the damn thing but it took me a bit to finally figure out what the hell was going on...at first i thought it was drivers lol

    single card with 860/980 and CPU at just under 4.4GHz got just over 18.5K Vantage score. Not too shabby at all
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  25. #50
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,656
    Dinos, you need to watch your amps to know what the single stage can handle.

    When watching amps you will see the exact limits of any cooler, this should be used in any professional heatsink review in the future. You are experiencing the amp runaway due to the capacity of the cooler.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

Page 2 of 4 FirstFirst 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •