ASUS P6T Deluxe NB/SB-Mosftet Block (FINISHED)
Hey all I have been working on some new water block designs for the ASUS P6T Deluxe. The mosfet block will be a single block to cool both sides of the mosfets. I am also working on a single NB/SB block. Here is the preliminary design for the mosfet area. ENJOY
Last edited by Bei Fei; 11-29-2008 at 11:31 AM.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
Nice, thats the best way to make mosfet blocks imo.
I agree. Any hope of this being back compatible?
wait til you guys see the inside.
he's getting my board as soon as i get it from asus.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?*
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
eagerly awaiting.
Oh, and naeKuh, the nanotubes are go.
Originally Posted by [XC] Kayin
I think you mean older boards right? This block was actually designed with the spacing from a Maximus II board. I am not sure what that is compatible with.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
Yeah, if it's the same as a maximus/Rampage. They look very similar, but I know there's always differences.
<-- can be guinea pig if it's the same...
YESSSSSSSSS!!!!!!!!!!!!
Someone has finally done it!!!!
Sorry Kayin, i get excited. I've always thought nanotubes would be the next thing in waterblock design.
I can't wait to see what you've come up with!!!
I use one of the most sought after materials in the WC world all throughout Mithril (clear polyvinyl) and this is what we celebrate?
From what I hear, it's not all it's cracked up to be. However, it may make an excellent reservoir if nothing else.
Spacing appears the exact same, as well. This could be very useful for multiple boards, which is always a selling factor...
Sorry, you mentioned somewhere recently that you've been working on something special, and when i saw the word nanotubes i immediately jumped to conclusions and presumed you were talking about a block.
My bad...
And yes, Tony of OCZ said that they had trouble getting results from nanotubes in their prototyping.
Hey, it's no big.
I have more toys out there. I know my materials, no? Keep watching.
Are they the same as what you showed me?...or did you make some changes?wait til you guys see the inside.
he's getting my board as soon as i get it from asus.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
WL, will you accept PMs from me? I have a question...
same....Are they the same as what you showed me?...or did you make some changes?
:P
ran the final specs with martin, there isnt much i can change on it. Its only a mosfet block. :P
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I still think that corner is a bit tight.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
cant do much unless you want to pull those caps off
I still think that corner is a bit tight.
And i hate double blocks.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I told ya man...taller is the way to go.cant do much unless you want to pull those caps off
And i hate double blocks.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
looks like a pretty cool block
I7 920 W/ Enzotech Sapphire
Asus P6T
4870x2 W/ XSPC Fullcover
6gb Gskill 1600
awesome bro!!! im going to get one of these boards when their available and hopefully a block from you
Oh its not finalized. But i guess he could make the top taller.I told ya man...taller is the way to go.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I will make a few designs and see what my flow analysis looks like. I will get the best flow around the bends as possible. Again this was just a 15 min sketch. Once I get the board from NeaKuh I will have a much better idea on the final dimensions.
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
From just the outside view, I can assume that the water channel path is very small in the corner. Try to keep the same channel cross-section area as the barb or bigger. You may need to raise the top a bit until the inside cross-section area is big enough
as bei and i both said, its not finalized.
he needs my board to get the accurate pictures out.
The final version will not be restrictive.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous?
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
I agree
---------------------------------------------------------------------------------------------------------------
MV-G
3770K 5.00
7970 1200/1700
GSkill 2400
Seasonic Platinum 1000
Silverstone TJ08-E
- Koolance AC-370 - Swiftech MCP-35X - Phobya Xtreme 200mm Rad - Koolance VID-AR797 -
---------------------------------------------------------------------------------------------------------------
USA National Debt
Sub'd. I've always wanted MOS-blocks like that; I'm pretty sure the hole-to-hole spacing is 76mm on that board; my guy in Jilin made some separated Mos-blocks for me to that spec. They'll arrive today or tomorrow, and I can check. He got the specs direct from Taiwan, so while I guess it's possible that they're wrong, I would trust it.
Thank goodness manufacturing in China is so cheap; that's the only way I can afford to buy something that might not fit!
Reply With Quote
Bookmarks