-
Rebuild my Lian Li PC-A71B
I hope itīs ok to post it here because itīs not a "real" Worklog this time, since iīm almost finished..
Here was my old one: http://www.xtremesystems.org/forums/...d.php?t=165692
Loop now consists:
D-Tek FuZion rev1
EK NB/SB 5
XPSC 4870X2 Acetal
Theromchill 120.3 (2xScythe Kaze Push, 1xPapst 4132L? Pull)
Laing Ultra 12V 18W w/ modded Top
Hardware:
E6750 @ 3,8ghz 1,45V (3,6@1,4V)
4870X2
4GB G.Skill PQ
DFI DK P35
Corsair 1000W
Temps:
CPU: Idle:29C
GPU: Idle:35C
NB: Idle:39C (last component in the loop)
Havenīt made any Benches or something so far, so i canīt say something about the Load Temps^^
And here is cra**y Pic from my Phone Cam:
Will up some Pics of the finished System with Cable Management, Cathode and some little things outstandig after the weekend, this is just a blurry pic to make you guys interested
I like it more than my first build, but tell me what you think about it..
regards
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
-
Like the colors. One thing I would change though is the length of tubing you've got at the bottom. I would route it through the top because it is just going to get heated by the PSU and the front fans. Looks good though
-
I don't think it really matters much. Unless the psu was like 1000C, having the tubing near it won't make any significant difference in temps. If it were me, I would have it going from the pump to your first block . Good job.
-
Here are the Pics from the finished System:
Iīm running the Fans @ Low Speed and getting:
CPU: 54°C under Primeload
NB: 46°C
GPU: 42°C
This seems very good for me with only one Tripple Radiator.. although iīll add a second Dual Radiator to the Loop to improve the Temps a bit and for my future Nehalem Setup..
Only the MEMIO on one card gets ~80°C under heavy Load, this has already been discussed here http://www.xtremesystems.org/forums/...49#post3418049 .. well donīt think it really harms my card so i can live with it..
@MomijiTMO: Thats a good idea, will think about this when i add a second Rad.. but for now iīm a bit to lazy to make this^^
regards
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks