Asus M3A79-T Deluxe

[DoubleZero]

One question,

CPU voltage for CPU frequency, NB voltage for NB frequency, HT voltage for HT frequency... what about bus speed? What do i have to raise? i can't get stable with 260htt, even with cpu,nb and htt low dividers. I've tried the core\pcie with no result. Do i have to raise NB voltage even if i have for example only 1400 nb frequency?

[demonkevy666]

One question,

CPU voltage for CPU frequency, NB voltage for NB frequency, HT voltage for HT frequency... what about bus speed? What do i have to raise? i can't get stable with 260htt, even with cpu,nb and htt low dividers. I've tried the core\pcie with no result. Do i have to raise NB voltage even if i have for example only 1400 nb frequency?

drop the north bridge multiplier

2600mhz is max for NB speed.

[DoubleZero]

drop the north bridge multiplier

2600mhz is max for NB speed.

I'm not even over 2000mhz.

[demonkevy666]

I'm not even over 2000mhz.

oh your right it's 1400mhz ( didn't even see you said it)

it needs Volts did you try the CPU-NB volts ?

not just the nb volts....

there two of them one in CPU one on the board.

[leoy]

Info on Bios 0504 :

1. Can't post at 1066 ram.
2. At 3.2(stable o/c previously) bsoded in prime within 5 secs.
3. After that couldn't pass welcome screen(bsod)

Last thing tried Cpu Prefetcher= DISABLED!
Seems to be working, now priming at 3.2 cpu, if nb is up to 2.4 and ram to 1066 like in 0403 i will keep it.