**OFFICIAL Gigabyte UD3 P45 Yorkfield (45nm Quads) OC and Discussion Thread**

**nugzo** · 10-28-2008, 05:44 PM

These New Gigabyte UD3 boards are awesome. I've had a hard time finding info and settings for Yorkfields though.
This thread should be reserved for Quad discussion. 45nm Yorkfields is the goal but 65nm are welcome.
Since 500FSB seems easy for quads on this board, i cant wait for some more results with Q9450's and Q9550's.

I've had this board up and running an hour. I previously had 2-Striker 2 Formulas, 1-MSI P7N diamond, 1-EVGA 780 FTW,
2- Maximus 2 formulas and 1- Rampage Extreme.My goal was a Q9650 4500Mhz 500x9 on Air. None of the other boards could do it.
Closest stable was 490x9 with the MIIF. I've only had 1 BSOD with this board and it only took an hour for the beginnings of an oustanding OC session.
This is what i call FUN! I've booted into windows at 533X8 only to get my 1 and only BSOD after 10-15 seconds.
That was with no extra voltage over what i'm running now. I'll be checking for max FSB Next.

Thanks to napalm for some bios settings.

I'll post a template in a few minutes.

***************************UPDATE***************** ******* 02/04/2009 These are my current 24/7 settings. 4410mhz, 8gb ddr2 @ 980mhz, GTX 295 22,000 in 3dmark06 and 23,000 in Vantage.

Here are my updated settings. My original post i didnt have gtls tweaked yet. I was able to drop all voltages.. The few minutes of Prime showing isn't for stability, just to show load temps. I am 12+ hours Small and blend stable with these settings.

Code:

******Gigabyte EP45 UD3P******

Q9650 490 X 9 4410MHz 

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.35GHz...........................[ 490 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 490      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 1000mv   ] 
PCI Express Clock Drive.........................[ 1000mv   ] 
CPU Clock Skew..................................[ 0ps      ] 
MCH Clock Skew..................................[ 50ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Disabled ] 
(G) MCH Frequency Latch.........................[ 400MHz ] 
System Memory Multipler.........................[ 2.00  ] 
Memory Frequency 1066...........................[ 980  ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 5        ] 
tRP.............................................[ 5        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ 52       ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ Auto     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 9        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ Auto  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 6 ] ................[ 9        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ Auto   ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.23750 ]...................[ 1.41250  ] 
CPU Termination   [ 1.20    ]...................[ 1.40   ]
CPU PLL           [ 1.50    ]...................[ 1.570  ]
CPU Reference     [ 0.766   ]...................[ 0.871 OR 0.886   ] 

MCH Core          [1.1      ]...................[ 1.400  ]  
MCH Reference     [0.760    ]...................[ 0.926   ] 
MCH/DRAM Refernce [0.900    ]...................[ 1.150 ] 
ICH I/O           [1.500    ]...................[ 1.570  ] 
ICH Core          [1.100    ]...................[ 1.200  ] 

DRAM Voltage      [1.800    ]...................[ 2.100] 
DRAM Termination  [0.900    ]...................[ 1.150   ] 
Channel A Ref     [0.900    ]...................[ 1.150  ] 
Channel B Ref     [0.900    ]...................[ 1.150  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Disabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

Thanks goes out to Jor3lBR for the template.

**NapalmV5** · 10-28-2008, 06:07 PM

http://www.xtremesystems.org/forums/...&postcount=304

may these settings guide to 4.8ghz my twin L822B363 brother

youre very welcome

**GAR** · 10-28-2008, 06:27 PM

I cant seem to get anything over 450fsb to pass prime blend, i had 475 stable on my maximus II Formula.

**nugzo** · 10-28-2008, 07:15 PM

Here is a Template of my bios settings for the above.

PHP Code:


******Gigabyte EP45 UD3 Template*******

Q9650 500*9 4500Mhz



Robust Graphics Booster [Auto]
CPU Clock Ratio [9]
Fine CPU Clock Ratio [0]

**********Clock Chip Control***************

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) [500]
PCI Express Frequency (Mhz) [Auto]
C.I.A 2 [Disabled]

*********Advanced Clock Control**********

CPU Clock Drive [1000mv]
PCI Express Clock Drive [1000mv]
CPU Clock Skew [0ps]
MCH Clock Skew [0ps]

*******DRAM Performance Control********

Performance Enhance [Standard]
Extreme Memory Profile (XMP) [Disabled]
(G) MCH Frequency Latch [Auto]
System Memory Multipler [2.00D]
Memory Frequency [1000]
DRAM Timing Selectable [Manual]

CAS Latency Time [5]
tRCD [5]
tRP [4]
tRAS [13]

*******Advanced Timing Control***********

tRRD [3]
tWTR [3]
tWR [6]
tRFC [48]
tRTP [3]
Command Rate (cmd) [2]


***********Motherboard Voltage Control*******

Load-Line Calibration [Enabled]
CPU Vcore [1.44375] (1.41 Windows)
CPU Termination [1.44]
CPU PLL [1.65]
CPU Reference [Auto]

MCH Core [1.6] 
MCH Reference [Auto]
MCH/DRAM Refernce [Auto]
ICH I/O [1.57]
ICH Core [1.2]

DRAM Voltage [2.2]
DRAM Termination [Auto]
Channel A Ref [Auto]
Channel B Ref [Auto]

Channel Timing Settings    

Static tRead Value [10]
tRD Phase0 Adjustment [0]
tRD Phase1 Adjustment [0]
tRD Phase2 Adjustment [0]
tRD Phase3 Adjustment [0]

tRD 2rd (Differnt Rank) [8]
tWR 2wr (Differnt Rank) [8]
tWR 2rd (Differnt Rank) [7]
tRD 2wr (Same/Difft Rank) [9]

Dimm 1 Clock Skew Control [+300]
Dimm 2 Clock Skew Control [+300]
DDR Write Training [Enabled]

Channel Driving Settings

Drive Strength Profile [Auto]
Data Driving Pull Up Level [Auto]
cmd Driving Pull Up Level [Auto]
ctrl Driving Pull Up Level [Auto]
clk Driving Pull Up Level [Auto]

Data Driving Pull Down Level [Auto]
cmd Driving Pull Down Level [Auto]
ctrl Driving Pull Down Level [Auto]
clk Driving Pull Down Level [Auto]

*****************Advanced BIOS Features*********

CPU Multithreading [Disabled]
Limit CPUID Max to 3 [Disabled]
No-Execute memory Protect [Disabled]
CPU Enhance Halt (CIE) [Disabled]
C2/C2E State Support [Disabled]
C4/C4E State Support [Disabled]
CPU Thermal Monitor [Disabled]
CPU EIST Function [Disabled]
Virtualization Technology [Disabled]

I need some help with memory settings. Could someone give me some ideas from my template on what to loosen or tighten to boost performance? Thanks

**NapalmV5** · 10-28-2008, 07:18 PM

Turbo Performance Enhance [Standard]

5 CAS Latency Time [5]
5 tRCD [5]
5 tRP [4]
15 tRAS [13]

*******Advanced Timing Control***********

4 tRRD [3]
4 tWTR [3]
13 tWR [6]
68 tRFC [48]
4 tRTP [3]
2 Command Rate (cmd) [2]

thats my ram timings

**~~bigslappy~~** · 10-28-2008, 10:17 PM

got my 2nd UD3 up & running 1st wentback to newegg ... letting the New Q9650 (#2 Q9650) burn in then i'll O/C it's the same batch as napalm's 2nd Q9650 also .
thanx Nugzo for starting this thread my ISP has been down
.. & thanx for the settings gives me a place to start ....

**nugzo** · 10-29-2008, 02:55 PM

I'm having a few issues with the 500fsb. I dropped multi to 8 and core 1 and 2 still fail anywhere from 2-60 minutes during blend. Going by my above template, what would you guys adjust? I cant change CPU or MCH reference, System will only post on Auto settings. Thanks!

**NapalmV5** · 10-29-2008, 03:40 PM

looser ram timings

bit higher vcore.. ~1.475

higher vmch

**nugzo** · 10-29-2008, 03:53 PM

I set ram on auto (5-7-7-15) I didnt raise vcore b/c i dropped multi to 8. that gves me 4000mhz whis is stable at 1.32v. I tried 1.45 and lower. Raised vmch to 1.65. Still no go. i wonder why i cant change any reference voltages? This board needs working GTL settings to fine tune......

**NapalmV5** · 10-29-2008, 05:07 PM

i was referring to 500x9

dont bother with 8x forget it.. it does not exist lol

concentrate on 500x9 and higher

**nugzo** · 10-29-2008, 05:58 PM

Ok i'm getting somewhere. I adjusted CPU & MCH clock Skew from 0ps to 300ps. I'm 15 mintes longer than my previous best. I'm not familiar with what that setting does. Does anybody know how this works and how it effects stability?

PHP Code:


*********Advanced Clock Control**********

CPU Clock Drive [1000mv]
PCI Express Clock Drive [1000mv]
CPU Clock Skew [300ps]
MCH Clock Skew [300ps]

**Slovnaft** · 10-29-2008, 07:55 PM

I feel like i've posted this in too many places. But I'll post again here because it looks like the thread for me

Some results on air:
Max validate: http://valid.x86-secret.com/show_oc.php?id=437871
Max CPU Math Benchable: http://hwbot.org/signature.img?iid=161004
3d Bench: http://hwbot.org/signature.img?iid=161660
That's not max, i'm sure I could bench 3d at atleast 535 but it was late.
I'm waiting for better ram to push further currently on a notsonice gskill 2x2 kit.
Pencil mods on the 4850 are worn off so it's crippled, gotta hardmod it soon.
I'm putting this under dice soon. I want to see 600fsb on a quad xD
I LOVE this board!

**nugzo** · 10-29-2008, 08:08 PM

Originally Posted by Slovnaft

I feel like i've posted this in too many places. But I'll post again here because it looks like the thread for me

Some results on air:
Max validate: http://valid.x86-secret.com/show_oc.php?id=437871
Max CPU Math Benchable: http://hwbot.org/signature.img?iid=161004
3d Bench: http://hwbot.org/signature.img?iid=161660
That's not max, i'm sure I could bench 3d at atleast 535 but it was late.
I'm waiting for better ram to push further currently on a notsonice gskill 2x2 kit.
Pencil mods on the 4850 are worn off so it's crippled, gotta hardmod it soon.
I'm putting this under dice soon. I want to see 600fsb on a quad xD
I LOVE this board!

Nice! Could you C&P my template from 4th post and fill in your settings? Thanks alot

Edit: Also your 2nd and 3rd links are thumbnails to small to read.

Edit 2: What FPO/Batch is that 9450? i have a few laying around i may try out.

**Slovnaft** · 10-30-2008, 05:18 AM

Originally Posted by nugzo

Nice! Could you C&P my template from 4th post and fill in your settings? Thanks alot

Edit: Also your 2nd and 3rd links are thumbnails to small to read.

Edit 2: What FPO/Batch is that 9450? i have a few laying around i may try out.

WOOPS. Links corrected below. I'm heading home in half hour, so I'll get the batch and post detailed settings then.

**nugzo** · 10-30-2008, 07:12 AM

Originally Posted by Slovnaft

WOOPS. Links corrected below. I'm heading home in half hour, so I'll get the batch and post detailed settings then.

http://hwbot.org/signature.img?iid=161004&thumb=false (SPi @ 8x 540)
http://hwbot.org/signature.img?iid=161660&thumb=false (3d @ 8x 530)

lol try again. No hot links to HWBOT.....

**nugzo** · 11-01-2008, 04:51 PM

Originally Posted by Slovnaft

WOOPS. Links corrected below. I'm heading home in half hour, so I'll get the batch and post detailed settings then.

Nice. Any prime stability yet? Also could you post a template please? Thanks

**seban** · 11-01-2008, 05:08 PM

Hi,

My random q9550 e0 is coming to me by mail

- I would be happy to reach 4ghz 24/7 with it.

Nugzo as you had few M2F and others boards which would you suggest for my target GHz and also easiness of achieving it.

Ofc all other members opinions are more then welcome.

Thanks

**~~Grnfinger~~** · 11-02-2008, 08:33 AM

few questions as I'm considering this board.
Will the MCW30 fit the NB/SB?
I see alot of high FSB screenies but I dont see anything stable.
How are the quads doing in real terms,MIIF is a decent board my 9550 will do 4.0 but seems to be volt hungry above 460FSB.
I have seen a few 6600's running on this board using less vcore than what was required on a Maximus X38 running same clocks has anyone experienced this for there 45nm quad?

Thanks

**AKHandyman** · 11-02-2008, 03:06 PM

Well kids, I see a lot of good screenies ... I guess I'll have to get one of these boards and see what it will do with a QX9770 in it ... I will have it water-cooled along with two HD4870 X2's (both water-cooled as well

) I think for the price right now, it would be worth it to see what the QX is capable of in this new board ...

**chad** · 11-13-2008, 09:11 PM

Does any E-tailers have this board in stock? I can't seem to find it. Could someone post a link to a E-tailer in the USA. Thanks

**Jor3lBR** · 01-15-2009, 01:45 PM

Just posted this on main thread and Q9650 thread.

Full post here: http://www.xtremesystems.org/forums/...postcount=1308

Template for 24/7 Q9650 1.376vcore and low volts on cheapo Air Cooler:

[BIOS Template for Gigabyte Users]

Code:

******Gigabyte EP45 UD3P******

Q9650 489 X 9 4401MHz 

Robust Graphics Booster.........................[ Auto     ] 
CPU Clock Ratio.................................[ 9        ] 
Fine CPU Clock Ratio............................[ 0        ] 
CPU Frequency 4.35GHz...........................[ 489 x 9  ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled  ] 
CPU Host Frequency (Mhz)........................[ 489      ] 
PCI Express Frequency (Mhz).....................[ 100      ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 1000mv   ] 
PCI Express Clock Drive.........................[ 1000mv   ] 
CPU Clock Skew..................................[ 0ps      ] 
MCH Clock Skew..................................[ 50ps     ] 

******DRAM Performance Control******

Performance Enhance [Standard] 
Extreme Memory Profile (XMP)....................[ Disabled ] 
(G) MCH Frequency Latch.........................[ 333MHz ] 
System Memory Multipler.........................[ 2.40  ] 
Memory Frequency 1066...........................[ 1174  ] 
DRAM Timing Selectable..........................[ Manual ] 

CAS Latency Time................................[ 5        ] 
tRCD............................................[ 5        ] 
tRP.............................................[ 5        ] 
tRAS............................................[ 15       ] 

******Advanced Timing Control******

tRRD............................................[ Auto     ] 
tWTR............................................[ Auto     ] 
tWR.............................................[ Auto     ] 
tRFC............................................[ 52       ] 
tRTP............................................[ Auto     ] 
Command Rate (cmd)..............................[ Auto     ] 

******Channel A Timing Settings******     

Static tRead Value        [ 7 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel A Driving Settings****** 

Drive Strength Profile..........................[ OC-1333 ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Channel B Timing Settings******     

Static tRead Value        [ 6 ] ................[ 8        ] 
tRD Phase0 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase1 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase2 Adjustment     [ 0 ] ................[ Auto     ]
tRD Phase3 Adjustment     [ 0 ] ................[ Auto     ] 

tRD 2rd (Differnt Rank)   [ 8 ] ................[ Auto     ]
tWR 2wr (Differnt Rank)   [ 8 ] ................[ Auto     ] 
tWR 2rd (Differnt Rank)   [ 7 ] ................[ Auto     ] 
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto     ] 

Dimm 1 Clock Skew Control.......................[ Auto     ] 
Dimm 2 Clock Skew Control.......................[ Auto     ] 
DDR Write Training..............................[ Auto     ] 

******Channel B Driving Settings****** 

Drive Strength Profile..........................[ OC-1333  ] 
Data Driving Pull Up Level......................[ Auto     ] 
cmd Driving Pull Up Level.......................[ Auto     ] 
ctrl Driving Pull Up Level......................[ Auto     ]
clk Driving Pull Up Level.......................[ Auto     ]

Data Driving Pull Down Level....................[ Auto     ] 
cmd Driving Pull Down Level.....................[ Auto     ] 
ctrl Driving Pull Down Level....................[ Auto     ] 
clk Driving Pull Down Level.....................[ Auto     ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.23750 ]...................[ 1.41250  ] 
CPU Termination   [ 1.20    ]...................[ 1.40   ]
CPU PLL           [ 1.50    ]...................[ 1.570  ]
CPU Reference     [ 0.766   ]...................[ 0.871 OR 0.886   ] 

MCH Core          [1.1      ]...................[ 1.400  ]  
MCH Reference     [0.760    ]...................[ 0.926   ] 
MCH/DRAM Refernce [0.900    ]...................[ 1.150 ] 
ICH I/O           [1.500    ]...................[ 1.570  ] 
ICH Core          [1.100    ]...................[ 1.200  ] 

DRAM Voltage      [1.800    ]...................[ 2.300    ] 
DRAM Termination  [0.900    ]...................[ 1.150   ] 
Channel A Ref     [0.900    ]...................[ 1.150  ] 
Channel B Ref     [0.900    ]...................[ 1.150  ]  

******Advanced BIOS Features******

CPU Multithreading..............................[ Disabled ] 
Limit CPUID Max to 3............................[ Disabled ] 
No-Execute memory Protect.......................[ Disabled ]  
CPU Enhance Halt (CIE)..........................[ Disabled ]  
C2/C2E State Support............................[ Disabled ]  
C4/C4E State Support............................[ Disabled ] 
CPU Thermal Monitor.............................[ Disabled ] 
CPU EIST Function...............................[ Disabled ] 
Virtualization Technology.......................[ Disabled ]

[Stability Test Prime95 Blend]

11 hrs Idle:

Hope this helps Q9650 and Gigabyte UD3P users!

**Sparda** · 11-02-2008, 03:39 PM

Originally Posted by Grnfinger

few questions as I'm considering this board.
Will the MCW30 fit the NB/SB?

Thanks

I think it will not fit. I cant slap it on the board because some other block are already on it. But you can see in the pictures. Probably need to mod it.

SB doenst need any WC. Passive or 40mm fan is ok. It just barely warm.
NB get hot and need proper cooling. Finish installing xp with eveything on stock and it already hot.
Mosfet also need proper cooling. It getting hot when priming.

Click image for larger version.

Name: P1010035.JPG
Views: 1868
Size: 86.2 KB
ID: 88293

Click image for larger version.

Name: P1010037.JPG
Views: 1899
Size: 78.0 KB
ID: 88294

**nugzo** · 11-02-2008, 04:37 PM

Originally Posted by Sparda

I think it will not fit. I cant slap it on the board because some other block are already on it. But you can see in the pictures. Probably need to mod it.

SB doenst need any WC. Passive or 40mm fan is ok. It just barely warm.
NB get hot and need proper cooling. Finish installing xp with eveything on stock and it already hot.
Mosfet also need proper cooling. It getting hot when priming.

Hmm let us know if you figure something out. It sure sucks we dont have temp sensors on the NB. I'd really like to know what its runnin.

**AKHandyman** · 11-02-2008, 04:44 PM

Originally Posted by nugzo

Hmm let us know if you figure something out. It sure sucks we dont have temp sensors on the NB. I'd really like to know what its runnin.

Anyway of putting an external sensor near the chip? If I were to use a water-block on it, would a inline temp sensor give an accurate reading of the temp of the NB?

**AKHandyman** · 11-02-2008, 04:42 PM

What water-block will work on this NB? I have a Danger Den Universal and an EK NB/SB EK6 ... so you think either will fit?

Thread: OFFICIAL Gigabyte UD3 P45 Yorkfield (45nm Quads) OC and Discussion Thread

Thread Tools

Search Thread

Rate This Thread

Display

Hybrid View