Micron D9 GMH\GKX\JKH etc club

**fatguy1992** · 10-16-2008, 01:53 AM

I don't know what to do with sub timming, one of my friend tried to change them and they were wrong and it corrupted windows.

Could someone explain them, or link me 2 a guide.

I miss my old sticks

I beat my new PC-8500 that i'll get back from corsair won't be D9 either

.

**deepsilver** · 10-16-2008, 01:32 PM

D9GMH.

**[XC] Oj101** · 10-16-2008, 11:12 PM

What voltage is that? I'm guessing 2.0v or less?

**deepsilver** · 10-17-2008, 01:25 AM

2.02v @ bios.

With 5-5-5-15 I might go under 2.0v.

**Ket** · 10-17-2008, 03:36 AM

Using 2.2v is well worth it, 1200+ easily

**Ket** · 10-17-2008, 03:57 AM

Just done a quick run with my new P5Q Pro, not too bad for 3.4GHz imo

This P5Q Pro really does destroy the TPower. I'll test its FSB limits when I get a wolfie (maybe in the next week or so

) if this P5Q Pro can do 520FSB+ I will declare it the undisputed P45 champion.

**[XC] Oj101** · 10-17-2008, 04:11 AM

2.15v gets me 533MHz 4-4-4-8 MemTest stable, 2.05v 600MHz 5-5-5-15 MemTest stable, so you should have a lot of legroom at your voltage.

**CryptiK** · 10-17-2008, 04:54 AM

Originally Posted by Ket

Just done a quick run with my new P5Q Pro, not too bad for 3.4GHz imo

This P5Q Pro really does destroy the TPower. I'll test its FSB limits when I get a wolfie (maybe in the next week or so

) if this P5Q Pro can do 520FSB+ I will declare it the undisputed P45 champion.

Not bad at all. However, I'll see your P5Q-pro and raise you a Maximus II Formula

**Ket** · 10-17-2008, 05:03 AM

I bet I can beat your M2F

it will all come in time tho, first step is a wolfie. Don't forget either a P5Q Pro is like £100 vs. £175-200

**CryptiK** · 10-17-2008, 05:15 AM

lol it's on

Well when you get your wolfie, let me know, we can battle

What is the battle though? We are gonna have the same BW & efficiency at any given FSB and ram speeds, we have the same ram kit, and you'll probably get a 8400.......

**~~philbrown23~~** · 10-17-2008, 05:23 AM

well im about to join this here club with 4X1gb mircron GMH cellshocks

**CryptiK** · 10-17-2008, 05:36 AM

Nice one, put up some screens when you get around to it.

**Ket** · 10-17-2008, 08:56 AM

Originally Posted by CryptiK

lol it's on

Well when you get your wolfie, let me know, we can battle

What is the battle though? We are gonna have the same BW & efficiency at any given FSB and ram speeds, we have the same ram kit, and you'll probably get a 8400.......

The battle will be if the M2F at double the price really offers any cuttiung edge advantages over the P5Q Pro. I'll win, don't worry

**Shiranui Gen-An** · 10-18-2008, 01:17 PM

Played around with the DRAM CLK delay settings in my DFI LT P35 and mananged to get my Corsair XMS2 8500 kit (non-Dominator) stable at 600MHz C5, PL5, 400FSB. BTW Smart Guardian grossly underreports VDIMM; the BIOS setting is 2.27 and DMM measurement gives 2.28, but it only shows 2.2V.

**Shiranui Gen-An** · 10-18-2008, 01:23 PM

Quick test with my Reaper 8500 kit (D9GMH) on the Maximus II. VDIMM was set to 2.38.

**~~philbrown23~~** · 10-18-2008, 03:40 PM

I'll post up screens, as soon as memoryc delivers them, they shipped 3 hours after I paid for them to now thats great service, bought like all they had left of the cellshock 8500's sorry guys they are mine

EDIT now they have 10+ kits and are 15.99 cheaper MF'S!!

**Ket** · 10-19-2008, 01:37 AM

HAHAHAA! That little evil plan of yours come back to bite you in the ass rather nicely I'd say

**Ket** · 10-19-2008, 08:53 AM

As is the current trend with dead D9s I stuck a 2x1GB kit of D9GMH in the freezer @ -25c, I hope they get revived. That kit could do just shy of 1200MHz 4-4-4-12 @ 2.5v

**Shiranui Gen-An** · 10-22-2008, 06:57 AM

Finally managed to push my Geil 9280 CAS4 kit to 600MHz CAS4 on my Maximus II, but it required 2.6V

**CryptiK** · 10-22-2008, 07:20 AM

Very nice, dual 32M stable too. Was that PL8? 2.6v is pretty high for 600 CL 4, did you have memory OC charger enabled or disabled?

**Shiranui Gen-An** · 10-22-2008, 07:30 AM

Memory OC Charger is enabled, and PL was indeed at 8.

**WaterFlex** · 10-22-2008, 07:34 AM

Shiranui Gen-An
Good job, mate. But there is no need in using CAS4. I have CAS5 and the same 12:10 ratio but i have bigger memory-bw.

**CryptiK** · 10-22-2008, 08:00 AM

Most sticks are everest & 1M stable at around 2.45v, but 32M stability is much harder to do. I'd be quite happy with that if I were you.

I'm currently working on a low voltage 24/7 setting - currently I'm at 533MHz 5-5-4-10 & tRFC 25 at 1.91v memtest (bootable CD & windows) stable, I will get it sorted tomorrow.

**neo mike** · 10-22-2008, 08:28 AM

what is your guys opinion on the xtreem team ddr2 10400 they run at 1300mghz , there was a thread on them but seemed to die out, anybody using of have experience with these ? thinking of buying them.

**Shiranui Gen-An** · 10-22-2008, 09:49 AM

Tested my Ballistix 8500 16FD5 at DDR2-1280 C5, PL9. VDIMM was 2.5V, I'm not sure why the 333/800 divider would need so much but anything less gave errors in memtest #5. Only did single SuperPi 32M.

Thread: Micron D9 GMH\GKX\JKH etc club

Thread Tools

Search Thread

Rate This Thread

Display

need help

Bookmarks

Bookmarks

Posting Permissions