"ASUS P5Q Deluxe discussion".

[gugle]

I can not run stability in the Prime Blend mode, no voltage in the memory?

I have a Q6600 VID 1.3250v
4x1gb Trasncend AxeRam Micron DDR-800+ (1.8v 4 4-4-12 2T)

Ai Overclock Tuner ................. [Manual]
CPU Ratio Setting .................. [8]
FSB Frequency ...................... [425]
PCIE Frequency ..................... [100]
FSB Strap to North Bridge .......... [Auto]
DRAM Frequency ..................... [1066]
DRAM Clock Skew on Channel A1 ...... [Auto]
DRAM Clock Skew on Channel A2 ...... [Auto]
DRAM Clock Skew on Channel B1 ...... [Auto]
DRAM Clock Skew on Channel B2 ...... [Auto]
DRAM Timing Control ................ [Manual] (5 5-5-15)
DRAM Static Read Control ........... [Disabled]
DRAM Read Training ................. [Disabled]
MEM. OC Charger .................... [Enabled]
Ai Clock Twister ................... [Lighter]
Ai Transaction Booster ............. [Manual] (08-All Disabled)
____________________________________

CPU Voltage ........................ [1.4250] --> WHICH CPU
CPU GTL Voltage Reference (0/2) .... [0.630] --> AUTO
CPU GTL Voltage Reference (1/3) .... [0.670] --> AUTO
CPU PLL Voltage .................... [1.50] --> 1.56
vFSB.................................[1.28]
DRAM Voltage ....................... [2.20] --> WHICH RAM
NB Voltage ......................... [1.18] --> 1.26
NB GTL Reference ................... [0.630]
SB Voltage ......................... [1.10]
PCIE Voltage ....................... [1.50]
____________________________________

Load-Line Calibration .............. [Enabled]
CPU Spread Spectrum ................ [Disabled]
PCIE Spread Spectrum ............... [Disabled]
CPU Clock Skew ..................... [Auto]
NB Clock Skew ...................... [Auto]
CPU Margin Enhancement ............. [Optimized Mode]

I think you are running a Q6600 ? Which ram in fact ? Habe you verified the ram voltage with a Digital Multimeter... If your board overvolts the ram as my 2 Dlx do with about 0.08 you are almost pushing 2.3 volts through the ram

Yes, I have a Q6600 VID 1.3250v
4x1gb Trasncend AxeRam Micron DDR-800+ (1.8v 4 4-4-12 2T)