Quote Originally Posted by Eldonko View Post
Same problem with my JR, PI is fine at high FSB but long term is not possible. Running OCCT it usually errors out at the 4 hour mark at the longest.
Well, I finally managed to get some semi-stable settings for 7x600.
i've been Priming for one hour and a half now

Only downside is that I have to set 'Enhance Data transmitting' and 'Enhance Addressing' both to Normal, which has a rather large impact on bandwith and latency. Overall it's even lower than running at 500MHz and both set to Fast or AUTO.
So allthough it seems to be stable for long term use, it's not very interesting compared to my 500fsb setting for 24/7 use which give more overall performance.

I think reviewers should be more conservative instead of shouting that the
P45 T2RS plus is every overclockers dream with setting a 600MHz bus. They should first test it for long term stability before they make such a statement