I found the Q-shield a pain, if you did not put your board in dead on the q-shield looked bent, I know the old shields can be a bit of a pain, but once in they set flat.
I found the Q-shield a pain, if you did not put your board in dead on the q-shield looked bent, I know the old shields can be a bit of a pain, but once in they set flat.
AMD Phenom II 940 BE (CACZC AC 0903FPAW)
CPU cooler: Water (EK-Supreme block & Thermochill PA 92.2 radiator)
Case: XG Dragon
Fans: 120mm at bottom, 120mm at top and small fan blowing onto northbridge area.
Mobo: DFI DK 790FXB-M2RSH (Bios R7SD421)
Ram: 2 x 2GB DDR2 1066MHz OCZ Gold 5-6-6-18
Graphics: Asus HD4850
Power: 700W storm PSU
Hard drives:1 x 750GB 2 x 300GB SATA and 2x 320GB SATA
CD/DVD drives: 1 x muti Burner and 1 x muti reader
OS: Windows Vista Ultimate 32bit/64bit
i built my PC with a 9950, the m3a79-t, 1 stick of crucial(rated 667 with 3-3-3..)
coz the other died on me, corsair tx 750.
this is what i achieved:
multi 14x
bus:210, cpu speed:2940, ram:840(4-4-4-18) stable 30min. prime
bus:220, cpu speed:3080, ram:880(4-4-4-18) stable 30min. prime
multi 13x
bus:230, cpu speed:2990, ram:920(4-4-4-18)
bus:240, cpu speed:3120, ram:960(4-4-4-18)
i luv this board and proc
fsb:240
multi 14x
CPU: 3360
RAM:960(4-4-418)
http://valid.x86-secret.com/show_oc.php?id=432394
Posting Permissions
Reply With Quote
Bookmarks