Deneb C1 Overclock!

**MrMojoZ** · 10-10-2008, 06:37 AM

Originally Posted by Manicdan

is it ok if i have no idea who they are? he didnt post a link so i figured he knew them personally

http://forum.coolaler.com/showthread.php?t=191848

My (whatever language that is) is a little rusty though.

**Macadamia** · 10-10-2008, 06:40 AM

Err, no requests for benches please. If marks are leaked, jobs will be at stake!

Serious.

(I read Chinese, and that was the OP's request)

**Caveman787** · 10-10-2008, 06:55 AM

Also might we ask what temp that was running at?

For all we know, it could be at 100 degrees celcius and why must it always be in Chinese. I'm American I'm not smart enough to learn Chinese lol.

**SnipingWaste** · 10-10-2008, 06:55 AM

CPU-Z must be showing the wrong voltage because in the link in the last page shows a pic of cpu-z with the CPU at stock speeds with the same voltage reading of 1.6V.

**Manicdan** · 10-10-2008, 06:57 AM

the google translator did an ok job, but so many weird sentences that made no sense.

either way this is great news to me. i just want one that runs 3.5-3.6 at a low safe voltage on my water loop. now can we get some damn pricing AMD. i hope they give these out at low clock speeds so the prices will be sub 300$ sure it would be nice to see them put out 3.0ghz chips at a high price to get back some money, i would like to see their stock prices go up for once

**Caveman787** · 10-10-2008, 07:01 AM

It could be or the guy decided to change it down and not change the voltage...which would be odd but a tease to all who want to know normal voltages.

He might not be able to leak that either.

**Bootup05** · 10-10-2008, 07:03 AM

Originally Posted by FlanK3r

good news

+1

I can't wait for AMD to step back up and be competitive in the Enthusiast market once again. It's been too long.

I loved having the choice between chips, seing which ways people swayed and why, and of course, the price competitiveness

Is that a word?

**Macadamia** · 10-10-2008, 07:26 AM

Originally Posted by Caveman787

Also might we ask what temp that was running at?

For all we know, it could be at 100 degrees celcius and why must it always be in Chinese. I'm American I'm not smart enough to learn Chinese lol.

He didn't post much more info.

The other posts were fellow members cumming.

**@@@@** · 10-10-2008, 07:30 AM

http://www.coolaler.com.tw/toppc/AMD45NM/INFO.JPG

more info and for those who are asking for the stock voltage don't know about the 4 Ghz though

**Macadamia** · 10-10-2008, 07:54 AM

Why is this identified as C0 though?

**Manicdan** · 10-10-2008, 07:55 AM

the 45nm version runs at 1.24v stock? is that high considering the 65nm runs stock volts in that range aswell?

**Sparky** · 10-10-2008, 08:01 AM

Originally Posted by Manicdan

the 45nm version runs at 1.24v stock? is that high considering the 65nm runs stock volts in that range aswell?

Might also be the upper range too. Like the q6600 has a range from 0.85 to 1.35, or something like that, and mine is a 1.325v chip so it is near the top (and it shows too by its overclock lol

). It is prepro as well, that might be part of it. Also remember being something new CPUZ may not be reporting correctly.

**informal** · 10-10-2008, 08:51 AM

Originally Posted by Macadamia

Why is this identified as C0 though?

IIRC the OP is an MSI engineer(not sure if he is a software or hardware engineer though).The C0 chip is probably the one from the same batch as the one at itocp forum and later at hardspell.The C1 came some time later,so he has both of these now.I suspect that this close to launch he has a C2 too.

**Rammsteiner** · 10-10-2008, 09:13 AM

Originally Posted by Caveman787

Also might we ask what temp that was running at?

For all we know, it could be at 100 degrees celcius and why must it always be in Chinese. I'm American I'm not smart enough to learn Chinese lol.

100C... I think the chip woldnt run anymore. I think, since no obvious CPU load is present, that it ran at 40~45C if ambient was 20~25C. Not sure though, just a guess.

And you dont have to learn Chinese really, in anyway there will be always someone able to translate it.

Although... I want to learn either Chinese or Japanese

**Lastviking** · 10-10-2008, 09:30 AM

I´m are a Xtreme member and i dont fear high voltage

, why use this forum if you not is a xtreme member?

Bh5 loves vdimm and they want more and more......its almost same with cpus.....the scream until they cant take anymore. If it dies buy a new one?

Push it hard :up

**Lightman** · 10-10-2008, 09:32 AM

On the last page of that forum guy called Jenex is showing CPU-Z screens from a Deneb CPU running DDR3!

Of course we can't be sure if they are legit, but same can be told about all the other SS.

Can't wait for my new CPU!

**informal** · 10-10-2008, 09:44 AM

Originally Posted by Lightman

On the last page of that forum guy called Jenex is showing CPU-Z screens from a Deneb CPU running DDR3!

Of course we can't be sure if they are legit, but same can be told about all the other SS.

Can't wait for my new CPU!

That post reveals one very interesting tidbit,apart from DDR3(if legit of course).
It list an ES clock speed of 2.6Ghz with a NB clock at 2.2Ghz, 10% over what we have now with 65nm Agena.So i guess we can expect more on the NB clock front with Deneb,even if we have to wait for AM3 boards,which is good news.

**ownage** · 10-10-2008, 09:50 AM

Originally Posted by Lastviking

I´m are a Xtreme member and i dont fear high voltage

, why use this forum if you not is a xtreme member?

Bh5 loves vdimm and they want more and more......its almost same with cpus.....the scream until they cant take anymore. If it dies buy a new one?

Push it hard :up

High voltage FTW!

Must guys don't even dare to run there 45 chips higher then 1.5v lol.
Yay, lets buy Deneb and reach only 4ghz with 1.6v. I hope these chips will do better voltage wise. For benching I don't care about voltage at all, but for 24/7 i do

**Particle** · 10-10-2008, 10:10 AM

Anyone know what we're going to be at for stock voltage on 45nm?

**Lightman** · 10-10-2008, 10:17 AM

Originally Posted by informal

That post reveals one very interesting tidbit,apart from DDR3(if legit of course).
It list an ES clock speed of 2.6Ghz with a NB clock at 2.2Ghz, 10% over what we have now with 65nm Agena.So i guess we can expect more on the NB clock front with Deneb,even if we have to wait for AM3 boards,which is good news.

You can be sure of NB clock increase

As for Deneb I can't say for sure but I will predict 2.4-2.6GHz for AM3 parts.

Here is some very old info I've got from AMD.

Click image for larger version.

Name: Roadmap.png
Views: 927
Size: 26.7 KB
ID: 86638

If Opteron gets 2.2GHz NB then desktop parts can only be faster

.

**Titan7171** · 10-10-2008, 10:28 AM

This is very exciting news.......I havent felt this excited to get a AMD cpu since the old xp2500 Barton on Nvidia NF7 days. I mean Ive upgraded regularly since then but only out of necessity and not just because there was something out there that I just had to have. This is definitely a cpu I just got to get if this info is true....go AMD!

**Manicdan** · 10-10-2008, 11:02 AM

god can someone just put me in a chemically induced coma until these come out. ive been waiting over a year for a real phenom and its so close, but no definitive dates or prices are making me crazy

**MrMojoZ** · 10-10-2008, 11:15 AM

Originally Posted by Manicdan

god can someone just put me in a chemically induced coma until these come out. ive been waiting over a year for a real phenom and its so close, but no definitive dates or prices are making me crazy

Watch some political news coverage, your brain will take a vacation for sure.

**Manicdan** · 10-10-2008, 11:25 AM

i tried to watch the second debate, 15 minutes in i decided the future president wasnt going to say anything more interesting than watching Ironman for the first time, and in full 1080p

**MrMojoZ** · 10-10-2008, 11:34 AM

Ironman for Secretary of Defense '08!

(Yeah, that happened in the comics.)

Thread: Deneb C1 Overclock!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions